Is it possible to use an Autodesk Inventor .iam (assembly) to generate a file containing only the visible/exterior surfaces of that .iam?
My employer has a requirement that, in certain situations, only data without internal features/details can be supplied to customers.In this case, we only want the customer to be able to view the assembly & not see the internal features of individual parts.
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
Am trying to convert this pump into solid ?
View 6 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
Attached is a test drawing
1. Why does my part not show up behind a surface?
2. What is the minimum dimension to make my part appear?
On the drawing I was working on, the part completly behind a surface was showing up until I rotated the view, then it dissapeared, this behaviour is not present in the test idw, the part doesnt appear at all behind the surface.
I was wondering is it possible to create a surface from a Revit model ? There are retaining walls etc in the revit model !
View 1 Replies View RelatedI don't know if I am doing something wrong but I made exterior elevations in views for a building and the interior partitions are also displayed. An exterior elevation should only display exterior walls.
View 8 Replies View RelatedI've generated my steel frame model using a skeletal model technique. So my part file consists of only sketch lines representing where I want my steel to be placed. I've created an assembly and used that in my inventor.dwg file.
The problem is that I need to dimension to the sketch file and not to the model shapes because the sketch lines define the center of gravity. These lines aren't visible even though I've right-clicked on the content and selected "Get Model Sketches". How I can get my skeletal model through to the DWG environment?
I am creating a folding door model and would like to use a parameter called EXERIOR WALL OFFSET. I have used this parameter before but am having trouble getting it to work within my family. The only difference is that I created one frame/jamb instead of 4 seperate profiles. The question is, why can't i get the jamb to move within the wall using the exterior wall offset parameter? It seems to move the sash/panels just fine but the jamb is constrainted somehow.
View 1 Replies View RelatedI'm trying to derive a surface .ipt file into my model. After selecting the plus include option, the part file is inserted into the feature manager but the object is no where to be found.
View 9 Replies View RelatedI'm wondering if there is a possibility in Inventor to export a surface model as a STL file. I use CAD programs to prepare models for simulations in other software and I would like to work with Inventor because my Department uses it. Till now I have been using Solid Works and with a little trick it is possible to export surfaces as a STL file. In Inventor I didn't manage to do this. So, is it possible?
View 9 Replies View RelatedI have a DXF and a skip file of a room i'd like to convert to surfaces i can use in inventor 2010. I hear this can be done with inventor 2013?
The files are too large to attach.
_____________________________________________
Inventor 2012 Pro
Windows 7 64 bit
Core I5 2410M processor | GeForceGT 525M graphics card | 8G RAM
I am trying to find a way to import a laser scanned mesh or point cloud file into Inventor (2013) such that I can use it to make a parametric representation of the form. The import format can be STL, OBJ, VRML, XYZ or PLY. I have tried the Mesh Enabler from Autodesk Labs but the files I am looking to work-on are bigger than the enabler can cope with and my system slows right down or locks-up.
I know bespoke reverse engineering software is the ideal way to go but I was hoping there was a way to model over a mesh to represent its form to create a placeholder in a parametric assembly. I'm not looking for accuracy, just a surface or solid output that can be constrained to native inventor parts. If I could get the files to STEP or IGES someway that would be enough.
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I have been trying to research how to create a custom surface. I found this article [URL]...... about how to to create a surface from a jpeg. The article says to "expand color on the top left." of the style editor. However, when I open the dialogue there is no "color" that can be expanded. The only thing in the top left of dialogue box is "lighting." Is there another step that the article misses, or is there another way for me to create a surface from a jpeg?
View 2 Replies View RelatedHow could I create a 'postage stamp' effect around the exterior of a rectangle -- other than typing a series of "V"'s around the perimeter?
Let not the one who says it can't be done interrupt the one who is doing it.
What I'm trying to accomplish is a way to create a kit (assembly of loose parts) that will be used in more than one product model. Each top level assembly (product model) will require the parts to be constrained in different locations but all of the components in the kit will remain the same.
Is the iAssembly tool the right tool to use for this?
How i can create with vba a surface Extend
Take a look picture?
How can I create a workplane with the API that is tangent to a surface and passes thru a workpoint. It is easy to create a work plane of type kPointAndTangentWorkPlaneDefObject by point and click in Inventor 11, but I can't figure out how to do it in the API.
View 5 Replies View RelatedTrying to patch and then sculpt an area on a pipe so that it blends together better, however it keeps coming up with an error. The strange thing is, it shows up in the preview after selecting all the edges but then does not calculate correctly.
Basically trying to fill the 2 small areas between the visible workplanes. Also, I couldn't get the project cut edges in the 2 sketches to only project the curves I needed, so all the cylinder edges are projected.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
Picture this, a tubular feature that has a path that runs along the circumference and turns linnear. A path thats .3125 in diameter. I attached a file that shows a hand sketch with this post but I can't tell if it will show up.
View 2 Replies View Relatedthe easiest way to create a vector image of a model in inventor? I also have other Autodesk tools at my disposai (Product Design Suite).
We have creating a catalogue of company parts, and they require nice clean crisp images for the brochure. They only seem to be able to create raster images.
I could not get the code to work for me, and I am not a programmer or pretend to be. I need to take a model and create a dwg with ilogic. It only needs to be one flat pattern view and one isometric view.
I also need it to have center marks for all the holes and I need to add certain dimensions.
I'd like to create pdf's with the 3D model embedded. This could then be viewed, rotated, and Zoomed.
Tetra4D is the software to do this as Adobe X no longer supports it.
How to create a work plane that is perpendicular to a surface? I'm trying to do this so that I can "split" the object into two separate entities where the plane is.
View 9 Replies View RelatedI've currently written an application for SolidWorks that reads file that geometry in the form of faces (ie. 3 or 4 double values that represent triangular and quadirilateral faces). I am trying to create the same application to work for Autodesk Inventor, but I am having some issues.
First, I am basing my code off from the examples given in the help files. There's a lot of pointers to objects being to get to the Face creation portion, this seems to be slowing my appliation down considerable compared to the SolidWorks counterpart. SolidWorks API has a modelling method called CreatePlanarSurfaceDLL that allows me to provide an array of doubles representing the vertex points in order (x, y, Z) for each point, so the array looks like this for a triangle (P1.X, P1.Y, P1.Z, P2.X, P2.Y, P2.Z, P3.X, P3.Y, P3.Z). Is there anything similar in the Inventor API to simply the process?
Secondly, when using the example, they all have a known "shape" and therefor there are a definied number of vertices, edges, faces, etc. And when adding the faces, the known points / vertices are used. In my case, each face contains information for it's 3 or 4 vertices. I created these using the prescribed methods, but when the final surface body feature is created, and a repair is performed on it, it shows a lot of duplicate edges and vertices. Do I need to take the time and filter out all of the duplicate vertices, and point to a single vertex that may represent a vertext used by up to 3 or 4 faces?
I've read the posts pertaining to coil features along curved paths. The existing solutions are limited in that they must rely on a solid with the addition of a bend feature. How can I create a helical surface structure including multiple bends like the one shown?
View 2 Replies View RelatedUsing the options param available for Create Transient Surface Body. The documentation states there is an option for Stitching and Merge Faces, which I would like to toggle to true. However, I'm not sure how of the correct syntax to provide this object.
View 3 Replies View RelatedWhat is the best way to create a workplane at a given angle on the surface of the tube. Imagine the workplane long and thin running along the surface of the tube. The angle will be a parameter (from a sketch or user).
I'd like the workplane to always be on the surface of the tube, even when the diameter of the tube (from a dimension in a sketch) changes.I'm thinking that a (angled) line in the same sketch as the two circles (which define the tube diameter and thickness) would be a good starting point.
How to freeze a layer in model space but still be visible in a viewport.
The layer just gets in the way in my model, I could just turn it on whenever I need to print the page but surely theres an easier way.
I have a simple solid model of a cube representing a cooling tower that still shows up when I do a realistic visual style even though the layer is off and/or frozen. I cannot hide this thing for some reason. What am I doing wrong?
View 9 Replies View Related