Where are the options to add objects & ActiveX objects to the VBA project? i can reference them but thats it... Have i got to do everything late binding or can i drag an object onto a form in design view?
View 1 RepliesSo here's the situation: I have been importing parasolid files into Inventor. When doing so, a folder named "Imported Components" would pop up right next to the parasolid file, with individual Inventor part files of all the assembly parts in the parasolid file.
View 3 Replies View RelatedInventor claims all parts and assemblies in certain project as located not in acctive project file, which is not true, see video attached.
This project was copied and ipj file renamed. I did it many times before without problems.
[URL]
We have had this issue now for a couple years and don't know what is causing it. We are using vault pro with admin set single project file. A user can work for months using correct.ipj, then randomly at 10:42 they will notice the active project was been changed to some other temporary project location "c: emp.....". Then it will happen to different users at different times. I cant seem to find any correlation to anything. I can only imagine that it is somehow triggered from the vault addin.
We are inventor 1012 and vault 2012 pro.
I am trying to write code to set the active project across a network. In the code below I have hard written the address in to our main server named "Rusk" . It fails with an error message "The parameter is incorrect". I have tried this using a mapped drive as well with no luck.
I think it may be a permissions error, I am running Vista 64bit. Inventor version 12. If it is a permissions error, are there any sample code snippets out there I can use to set the permissions?
Public Sub SetActiveProject()
Dim ProjectID As String 'variable to hold Project ID
Dim ProjectAddress As String 'variable to hold an address path
'Verify the project ID is entered
If UserForm1.TextBox3.Value = "" Then
[code]....
I encounter a problem that I do not understand. I created a little C# routine for Autocad Electrical (2011 and 2012) which adds some drawings to the current project with the following command:
(c:ace_add_dwg_to_project dwg2add paramlst)
This method works perfectly. With the parameter list you can set the Section, Sub-Section and Descriptions of the page properties, exactly what I want. When I start the routine, I check which project is active. If the wrong project is active, I activate the appropiate project with the following command:
(c:wd_makeproj_current wdpfnam)
So, when I want to add drawings to project A and project B is active at the start of the routine, I activate project A and the drawings are added. When I want to add drawings to project A and this project is already active, the drawings are not added to the project. The method mentioned above to add drawings returns nill, which means a failure.
Why is this happening? Is this a bug of Autocad?I already tried to always activate the project I want to add drawings to, but that doesn't matter.
I am having an issue when opening and saving files is very slow when I have a project active in the Project Navigator.
If I have an active project, and I open a file via Project Navigator or Windows Explorer, the process hangs for 15-20+ seconds at the 'Opening C:xxxxxxxxxxxxxxx.ac$' point, where it is creating the temporary file.
If I 'Close the current project' in the project browser and open the same file via Windows Explorer, the process takes less than a second.
I think it's quite a lot of useless work to always select objects before or during a command, if you manipulate the same set of objects over a longer period of time. Say, as an architect I have a floor plan with a table and chairs. Now I want to copy, translate, rotate and scale the table with the chairs until they fit my floor plan. So I have to select the furniture, copy it, select it again, move it, select it again, rotate it, select it again and then scale it. Of course, there is the "previous" option, but is there a way of keeping a selection set active after the command so you just can go on to the next command without re-selecting the whole thing? My favoured workflow would be: Select the objects, copy them, move them, rotate them, then scale them. The objects should be active all the time and deactivated with ESC after the manipulation.
View 3 Replies View RelatedI need to export the areas of multiple closed polygons to excel and update that excel as soon as the areas change. We've been using an outside contractor who is able to do this using land f/x.
View 2 Replies View Relatedi want to select all the objects in active artboard using javascript
View 5 Replies View RelatedWe need a script that select all pattern objects in the active document in illustrator.
View 5 Replies View RelatedI can only create project with SD frame sizes. 720p or 1080p is not offered in the Project details setup.
Also when I want to capture from a 720p webcam I can only select "DVD" in the dropdown list for the capture proifle. Why are all the HD features missing
VS X4 Pro with SP2 on W7 x64.
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies View RelatedI want to know if is it possible to create design options in a grouped project.
View 3 Replies View RelatedI do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies View RelatedAutocad 2007.
Can we treat the exploded text (i.e. individual text alphabets) as geometrical objects?
Can we apply "OSNAP" options on these exploded text objects?
Actually, I would like to prepare the symbol of National Board NB to be used to make the "Name Plate" for pressure vessel.
I ‘ve put some blocks (Cone penetration test) in a profile view. Then I created view frames and sheets. I tried to insert those blocks into the sheets with the 'Project objects to profile view' command. I get the message: “There are 10 objects outside the Profile view's station range and will therefore be ignored.”
View 5 Replies View RelatedSince Edge only has rectangles and ellipses built in as available shapes, how to I/we work with polygon shapes and active mouseover areas INSIDE of these shapes and non-active mouseover areas OUTSIDE of the shapes?
Problem/symptom: when I import a polygon, be it any file format from from Photoshop or SVG from Illustrator, a rectangular border/background (transparent) gets applied, leading to this rectangle defining the mouseover area of the shape - and not the shape itself (be it a star or whatever).
WHAT I WANT: the very shape defines the mouseover area. How do I achieve this?? See examle below:
WHAT I DON'T WANT: how is is now:
When I select an object to view in my profile, all I get is "0 objects selected". I have tried selecting several objects in plan top view, but get "0 selected". What is the "simple" solution that I am overlooking?
View 2 Replies View RelatedI am using C3D 2012. I my drawing I have 3D solid objects that I want projected into my roadway x-sections. When I use the menu command to "project objects to section views" and select "solids" I get the message "no objects to project". Are their different types of solid objects in autocad?
View 9 Replies View RelatedI`m looking for the code which will capture the active window similar to iProperties-->Save--> Capture
View 4 Replies View RelatedI want to delete the inital Sketch (if was already opened) that Inventor creates when a new part is added.
I have tried this, but doesn't work.
Sketch sketchActive = docPart.SketchActive.
sketchActive.Delete();
I am using Revit Architecture 2013 and I have a few different design options for the mian level of a house I am working on. I have the North wall of the house in a design option for the living room at the moment. But I have decided I no longer want that wall in the my living room option, I would like to move it to my kitchen design option so I am able to move a window that is located on that wall. I cannot seem to find a way to move a wall from one design option to another or have it in both if it is already part of a design option. How I can get this wall and the windows located on it into my kitchen design layout without having things being double counted in the schedules?
View 6 Replies View RelatedHow can I do this? A reference dimension was created by a circular pattern and it covers a circle I'm try to select.
View 2 Replies View RelatedI'm new to the style library and how to take an existing drawing that was created on one standard, and changing it to another standard I just created. The new standard has different dimension styles, text, and layers. I've added all the styles to my style library and I've set the new standard to the active standard in both the styles and standards editor and the document settings. If I create a new view, it comes in on the new standard, but the existing views are still on the old. How to I get the existing views on the new standard?
View 2 Replies View RelatedHow you can keep constraints active in sub assemblies so that when I am moving a subassembly the extra movement say in a transitional constraint is able to move so I can see if the total movement allowed is to much?
View 2 Replies View RelatedChanges all dimensions, balloons, ect (define more if you want) to current object default in active standard.
Sub ChangeDimStyle()'J.Kriek 2012 Dim oApp As Application Dim oIdw As DrawingDocument Dim oDim As DrawingDimension Dim oBalloon As Balloon Dim oDimStyle As DrawingStandardStyle Dim oSheet As Sheet Set oApp = ThisApplication
[Code]....
How can you retrieve the active sheets revision?
View 5 Replies View RelatedTrying to create a bit of code that when the 'OnNew Document' event is fired the code checks for a particular Custom Property. Depending on what the Custom Property is set to a form is then fired with relevant text to point the user to a specific area in the workspace. Al this works ok.
But if they press cancel i need the code close the activate 'Part1' which inturn then allows the user to select 'New' to begin again.
I have tried various scenarios but the main problem is that Inventor then crashes!
PublicSub applicationEvents_OnNewDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnNewDocument
[Code]....
I am using iLOgic on Inv 2012 to try and close the active document using the following piece of code -
InventorVb.Application.activedocument.Close (True)
This close the document but brings up the following Error msg...
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
Any better piece of code that shuts down the active document but doesn't return the error? (I only want to shut down one document, not the application)
I'm trying to get the value of the Category iproperty of the model on the active drawing sheet. This is not a problem in a single sheet drawing, but I'm not sure how to specifically retrieve the Referenced Document of the Active Sheet in s multi sheet drawing.
Here's what I have:
Option Explicit
Public Sub PartsListFilter()
'set reference to the drawing document
'assumes that a drawing is active
Dim oDraw As DrawingDocument
Set oDraw = ThisApplication.ActiveDocument
[code]........