How you can keep constraints active in sub assemblies so that when I am moving a subassembly the extra movement say in a transitional constraint is able to move so I can see if the total movement allowed is to much?
View 2 RepliesI need to drive more than one constraint at a time. The assembly consist of a hydraulic ram that pulls a cable which is routed around a few pullys and then pulls another linear moving member. I don't really care about modeling the cable right now, I just want the cylinder piston and the final member to move in unison. I can only drive one constraint at a time, so I figured I could relate the two constraints together by setting them equal to a parameter (variable), but that isn't working. Is it me or is driving multiple constraints at a time something that would be very useful for a lot of applications?
View 3 Replies View RelatedHow is it possible to have a part in an assembly and then remove it when it is not required?
I have a Skeletal assembly of a cabinet with hinges on the left hand side when facing the front. When a customer requires the hinges to be on the right hand side, I need to make the lock keep disappear from the Right hand side panel sub-assembly and make it appear in the Left hand panel sub-assembly.
At the moment, I have the lock keep, the BOM structure in the file is Normal, this is overidden in the assembly to being Reference for the first instance, the lock keep is fully constrained in both sub assemblies and both are in an array of only 1. I increase the value of the array from 1 to 2 and by a distance of zero(0), the newly added part would have a BOM structure of Normal, consequently it would then appear on the BOM. This method was something I last used when using IV2009, it was a method I used to control both visibility of parts in assembly drawings and on BOMs.
I'm now using 2013 and arraying a part with a overidden BOM structure of Reference makes the new part a reference part aswell even though the file itself is BOM structure of Normal.
How do I make referenced components from parts and assemblies? (I searched the web and it said that that you can change it in the iProperties by selecting the Reference tick box under the occurance tab - but no such thing exists in Inventor 2011!
View 2 Replies View RelatedI'm modeling cables running through a series of cable clamps. I'm working in an assembly with my structure as one part, clamps as seperate parts, and cables as separate parts. I modeled the clamps first and am using them to create my 3d spline to run the sweep. The clamps have moved several times and each time, the sweeps (cables) do not update to follow the new clamping path. I have tried multiple ways of solving this.
I've tried to redo the splines using "Include Geometry" and running the spline through the centers of the clamps. I've also deleted the constraints (which for some reason turn into fixed) and reapplied them as coincident constraints. However, once I setup these coincidences, they always change back to fixed.
In a last ditch method, I've created 2d sketches at EVERY clamping location (yes that's alot of sketches, time and effort) and projected the circular geometry to get a center point. This has seemed to work, but is so much work, there's no way we could use it regularly.
Many times, we run several individual wires from one device to another. They are not grouped in a cable jacket or anything just individual wires. I was wondering if there is anyway to make the wire routing look a little neater as right now I have to tweak each wire one by one and many times it looks like crap. Can I use a segment for this and then just turn off the visibility of the segment or something? I just want the wires to look neat running from one place to another and there must be a way to do this?
View 6 Replies View RelatedI'm trying to make a few assemblies inseparable for a parts list in a Drawing, but I can't seem to make it work.
I know I have to do this in the Bill of Materials menu, but for some reason the part I want to make inseparable is greyed out whiles the one that is just one part isn't.
My only option right now is to make it a weldment which works but not ideal, because now the material isn't correct.
I'm trying this on the 099.03.00.097 assembly in the picture.
We use a similar sub-assembly in almost every assembly we design. So what I would like to do is make a template from this sub-assembly that I can make adaptive, constrain to the proper parts and have it resize to the main assembly. I've been trying to do this for a few weeks now with little success.
I have seen tutorials make adaptive part templates but never adaptive assembly templates. Is this even possible?
I know you can't make individual parts adaptive to multiple assemblies without saving each part as a different file and I think that's where my problems are coming from. Even though I save the template as a different file is it still referencing the original adaptive part in my library folder? If so, is there a way I can make it not do that? I may be way off base there too I don’t know.
I am working in an Inventor Assembly .iam, I have about 250 fasteners (screws) that are constrained to a flat washer and lock washer. I would like to put them in as a single unit (sub assembly if you will) and then promote or explode them in the top level so that my bom has 250 screws, 250 washers, and 250 lock washers all at the same level, not associated to one another except thru the constraints that were entered in the original assembly. I have tried Promote but that doesn't work because it removes the washers from the original file and I end up with only 1 instance of the assembly. Am I approaching this incorrectly? Is there a better way? I run across this scenario with different components quite often.
View 2 Replies View RelatedIf you have created a sub assembly and inserted it into an upper level assemby, is there a way to bust up the sub assembly at that level?
The issue arising is the individual components need to be called out on the upper level, but in the drawing are all showing up as the same balloon.
i have a valve vault assembly that i am creating that has two headers running through a large cylinder vault. how i get a total BOM if i were to create the header assembly file separate from the the total vault assembly file. is there a way to explode the header assembly bom when i do the drawing.
View 1 Replies View RelatedFor those of you struggling with viewport scale factors this list might prove beneficial.
Scale Factors – AutoCAD model space drawing using a paper space viewport.
Imperial (architectural)
12”=1’ 1xp
9”=1’ 3/4xp
6”=1’ 1/2xp
4”=1’ 1/3xp
[Code]....
Imperial (engineering)
1”=2000’ 1/24000xp
1”=1000’ 1/12000xp
1”=500’ 1/6000xp
1”=200’ 1/2400xp
[Code]....
Metric
1:5 1/5xp
1:10 1/10xp
1:20 1/20xp
1:30 1/30xp
[Code]...
How to use. Make viewport active. Invoke Zoom command, Scale option, press Enter, input nXP scale factor type, for example, 1/96xp then press Enter.
We are using this code for Page setup. But We don,t know how to make this page setup current and active.
(defun c:pgs ()(acet-error-init(list(list"cmdecho"0"osmode" 0)T))(vl-load-com)(setvar "Tilemode" 0)(vla-Add (vla-get-PlotConfigurations (vla-get-ActiveDocument (vlax-get-acad-object))) "A1" :vlax-false)(vla-put-PageSetupOverridesTemplateFile (vla-get-files (vla-get-preferences (vlax-get-acad-object))) "A1")(setq item (vla-Item (vla-get-PlotConfigurations (vla-get-ActiveDocument
[code]........
I'm trying to use assemblies when creating a corridor. The Tool Pallette is emply but I can drag the assembiles in from the Catalog. I've also created an assembly using the ASC. Neither work when I try to use them. The error message is attached.
I'm using a network installation and I do not have the option of changing it to a DVD installation.
Why do we not have the "=" (equals) constraint option in 3D Sketch mode? It seems like a very basic need for a constraint. Is there a reason why one should NOT want to have an "equal" constraint in a 3D Sketch?
View 3 Replies View RelatedAll I need to do for now is to align one part to the center axis of another part. Later I will constrain but for now I just need to see where the two meet so I can project geometry onto a draw surface. So, all I need to do is make their central axes coincide on one straight line.
I can achieve the same result by counting the various lengths but I'm hoping there's a simpler solution.
Assume a beam like the one in the picture below.
How must I configure the constraints?
The left constraints should be a "Fix constraint" on the edge(not the face) I assume.
But the right constraints must not fix all DOF's.
How can I configure the right constraint?
I am trying to complete an awsignment and I need to know how to select the Masks table to make the Masks panel active.
View 1 Replies View RelatedWhen the animation is running, if I select another tab, the animation will stop. I would like it to continue. How do I do this?
View 1 Replies View RelatedI've just installed 2012 and I seem to have a problem with constraints.
The basic problem is that the SHOW CONSTRAINTS command doesn't show the constraints for geometry that clearly has them. For example, if you delete a horizontal constraint from a line and then add a horizontal constraint to the same line, the line will be constrained but the constraint will not show up.
is it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?
I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.
Is there a way to get a list of constraints that exist between two parts in an assembly?
It will take forever to go through each and every constraint for one of the parts, checking the "Other Half" of each just to find all constraints between to specific parts.
I'm trying to build a c# program where I can test a simulation for a robot project I have made angle constraints in inventor and now I want to be able to send numbers to specific joint.
With the code listed below I can get all the constraints from a selected part and get the name of the specific constraints.
I find it confusing that most of the documentation is in VB so this is what I have discovered on my own, perhaps this isn't at all the way to do it.
Inventor.SelectSet selSet=asmDoc.SelectSet;
try
{
[Code].....
Trying to create a gimbal with a supporting frame, an outer square frame, and an inner square frame. when i insert the outer square frame into the supporting frame, i constrain it so that the axis of the hole i have drilled in my frame and the axis of the hole through my supporting frame are aligned, i then constrain a face of it to be a set distance from a parralel face of the supporting frame to centralise it. this works ok, and i can rotate this frame as i like. When, however i insert the inner frame and constrain the axes of the holes drilled through it to the axes of the other holes drilled through the outer frame, and two faces to be a set distance apart, it allows me to rotate my inner frame, but no longer allows me to rotate my outer frame! what have i over-constrained?
View 3 Replies View RelatedI'm using the line tool in a 2d sketch. First, I draw a polygon with the tool. Then, when I come to move one of the lines with the mouse cursor, it detaches from the other lines, and becomes a single floating line on its own.
As far as I can tell, it has nothing to do with the fly down constraint menu options, but i may have changed another option elsewhere in inventor and not have realised it.
Using "drive constraint" I would like to simulate the action of a "soft close" mechanisim on a drawer...fast movement for the first portion of travel, then slow movement for the very last portion of travel...
View 1 Replies View RelatedI have some "insert" constraints for DIN rails in holes. I've moved the holes, but the DIN rail doesn't move. The refresh button isn't "lighting up", or when it does, it does not do anything to move the rail. Is there something that's been "shut off" to keep things from moving?
View 7 Replies View RelatedAre there any C++ samples of the use of C Assembly Constraints? The syntax is so much different with VB a few real examples would be really useful.
View 2 Replies View RelatedHow do you mate two surfaces so that the item will not move any further once it makes contact with that surface? i.e a rotating cam which is designed to stop once it comes into contact with an object / surface.
View 2 Replies View RelatedSomething is strange with the constraint activity.
I'm using the constraints to assemble a project. I select the parts with the proper constraint, when "apply" is clicked the parts do not "pop" to location as they use to. I have to go up to "manage" the click "rebuild all" for the parts to move to new location.
Does Inventor (2012) have the option to view sketch constraints as a list? I feel like I am playing pictionary trying to find out what constraint is what and what it is constraining and it doesn't work that Inventor stacks anything nearby on top of each other.
I've attached a file showing what the problem is, please don't judge the model tree. I was prototyping as I went so it is messy.