AutoCAD Inventor :: How To Replace Dimension Formula With Current Value
Nov 15, 2011
During design development dimensions get modified a lot. E.g. shorten something by 25mm I just edit the feature dimension by tagging on "-25" in the edit dimension box. If lots of modifications are made the dimension gets messy since all the edits are saved (e.g. 150 mm - 25 mm +1 mm -5 mm). In sketch mode, I just retype the shown dimension, but for other features like offset work planes, extrusion depth, etc, the actual value isn't even shown anywhere. Is there any easy way to replace the formula with the current dimension value without having to measure the feature?
Basically, I like being able to use the dimension entry box as my calculator, but more often then not, don't want the calculation history saved.
View 9 Replies
ADVERTISEMENT
Feb 10, 2012
Is it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
View 9 Replies
View Related
Aug 4, 2009
Is there a way to add a specific amount/length to a dimension by using a formula? For example, say I wanted to measure a length of conduit between two fittings. The clear distance between the fittings is 48" and the conduit is recessed into the fittings by 3/4" on each side. If I dimension between the fittings, normally it would read 48", but I want it to read 49-1/2" so my shop people know what length to cut.
View 9 Replies
View Related
Aug 23, 2012
In AutoCAD Architecture 2009, we had this awesome button that would basically "lock" the z-axis. This was very handy to move 3D objects around in the same plane.
Now in AutoCAD 2013, the button is no longer there! I found that you can make it a full-time change in the Options/Drafting tab, but we like to switch back and forth with this and that button was really handy.
I've also read that in older versions you could run the "AecProject.arx" file, but we don't have that in our AutoCAD 2013 folder (and I can't find it anywhere else on our hard drives.)
We do have AutoCAD Architecture 2013 but I was trying to only utilize what I needed rather than turn on Architecture every day.
View 1 Replies
View Related
Dec 21, 2012
I have photoshop 7 and I wish to remove unwanted objects from photos and replace them with the current background. I have tried to use the healing brush tool , and the cloning tool, but I do not have content aware. How can I replace unwanted elements in my photos with the current background using my version of photoshop. The welcome screen to my edition says it is possible?
View 1 Replies
View Related
Jul 9, 2012
I am familiar with the LAYMCUR command to select an object and make that layer current. I am hoping there is a command to select text or a dimension and make that style current. I can't fine such a command. I have to select a text, see what style shows up in the box at top, go to the text style box, find the style and make it current. It seems like unneeded steps. It's simple for layers, why not text and dimensions?
View 3 Replies
View Related
Nov 29, 2013
is it possible to draw a dodecahedron with a formula?
View 2 Replies
View Related
Nov 25, 2012
I want to add a column to my parts list, which displays a value based on a formula.
Lets say i want to show the submerged weight of a part; So i need to create a column, which can use the information about a parts volume and mass to calculate its submerged weight.
An easy formula, but is this possible in Inventor (2012 Pro)?
View 2 Replies
View Related
Apr 26, 2012
I am trying to create a iLogic Rule that will measure the Length, Width and Thickness of a part and ut it into the custom fields we have. I am having a hard time remembering how to get it to do it from the assembly level. I want to run this on the assembly and have it populate all the parts inside of it. The code below will do it for a part but what is it I add to get it to drill down into the assembly?
iProperties.Value("Custom", "THICKNESS")=Measure.ExtentsHeight
iProperties.Value("Custom", "WIDTH")=Measure.ExtentsWidth
iProperties.Value("Custom", "LENGTH")=Measure.ExtentsLength
Then I want to add this formula to the Stock Number iProperty = <Length> X <Width> I can get it to add the values but I can not get it to add the formula to the stock number.
View 9 Replies
View Related
May 28, 2013
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies
View Related
Feb 23, 2013
how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies
View Related
Jun 27, 2011
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies
View Related
Jan 27, 2012
Is there a way to make the linear dimension a diameter dimension?
View 9 Replies
View Related
Jul 20, 2013
how can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLAN current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
View 7 Replies
View Related
Sep 29, 2011
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies
View Related
Sep 3, 2013
Technique that can check the current plotter name for the current tab and assign it to a variable? i.e. can it be assigned to a variable to check if if equals "myplotter1". The next step - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a new plotter but I would really like to only run the routine if it really needs to.
View 9 Replies
View Related
Feb 23, 2012
i have a csv file that has 6 columns, PNEZD and a 6th column which is my notes..i type a star in the data collector after my code, make my note, and then find/replace after i export it and replace star with a column..that gives the desired 6th column in excel that my boss wants....problem is he also wants to see that next to the Full Description in Civil 3d 2012...i tried adding a Point File Format with a 6th Column, User Defined, String for type...named the column Notes...but if i go to edit the point there is no 6th column in the Tool Palette.
View 1 Replies
View Related
Oct 30, 2013
is it possible to replace a model from .iam to ipt in idw?
View 2 Replies
View Related
Oct 31, 2013
Whats the best way to save and replace many ipts and iams with a new name. I would like to select many files in the tree and then loop through each of them.
View 2 Replies
View Related
Jan 24, 2012
I have a problem concerning the frame generator skeleton. When I try to save my assembly with its frame.iam and skeleton.ipt, I can't save it. The save window says that the skeleton is not the current version.
In the folder where the skeleton file is saved, two skeleton ipt files are appearing, one "skeleton.ipt and one "skeleton.newver.ipt"
I'm working with Autodesk Inventor Professional 2012, in combination with Autodesk Vault 2012.
View 1 Replies
View Related
Oct 6, 2012
I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
View 1 Replies
View Related
Aug 12, 2009
I am creating an iAssembly with iParts. Some of the iParts have the "Table Replace" colum option and some do not. Both iParts have tables with members and part numbers. See pic.
View 3 Replies
View Related
May 15, 2013
I have 30 families of seals (arf arf!)
I would like to put family A in folder A
I would like to put family B in folder B
etc
During testing I had 10 seals in one folder & used :
Component.Replace("Part1:1", "OtherPartfilename.ipt", True)
But splitting the parts up into different folders breaks the model because (I'm guessing) the part can't be found. My thought was to have one folder (Seals) with subfolder (Seal A, Seal B,etc) - is there a way to search the sub folders & use replace?
If I stick with one folder it will end up containing 300+ parts which will look messy.
View 3 Replies
View Related
Nov 27, 2011
We get our clients acad drawings of the layout of the ceiling. Normally we use it as xref in acad. Now that I have placed the acad drawing in an .Ipt and placed them in a. Iam like you see in the files I sent. Then i place the panels with iCopy.
Now it happens that the layout drawing changes and I get a new acad drawing. I then replace it with the already placed drawing in the .ipt. This is fine until i update the .iam and then i get alerts that the constraints are no longer correct because the geometry is no longer be found.
What I can do is change the sketch in the .ipt but that is then done manually with the possibility of errors. Now my question is if you know a way to replace the drawing in the. Ipt and update so that the constriants stay correct in the .iam and the panels will change with the drawing?
View 5 Replies
View Related
Oct 2, 2013
I am trying to replace the title block of the first sheet of the active drawing via C#. I currently am receiving the following error on the last line of The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)).
Why the code below is throwing this error? I have tried multiple variations of the code below to no avail and I'm sure this is something minor that I am overlooking. The title block definition under Drawing Resources is replaced with no errors, the title block on Sheet 1 is deleted just fine, but I can't seem to add a Title Block back in!
How Documents are defined:
Inventor._DrawingDocument oDoc = getDoc();Inventor.DrawingDocument sourceDoc =(Drawing Document) instance.Documents. OpenWith Options(sPath, options, false); Find, copy, replace: TitleBlockDefinition tBlock = sourceDoc.TitleBlockDefinitions[blockList.SelectedItem.ToString()]; TitleBlockDefinition newBlock = tBlock.CopyTo(oDoc, true); oDoc.Sheets[1].TitleBlock.Delete(); oDoc.Sheets[1].AddTitleBlock(newBlock);
View 1 Replies
View Related
Apr 24, 2013
I would like to know if there is any possibility to replace a component with another one, that has a different internal name. Losing the dependencies would be acceptable.
ReplaceReference and PutLogicalFileNameUsingFull always return the error "wrong parameter".
View 5 Replies
View Related
Jun 13, 2013
I have an assembly which I want to replace one of the parts with one of four other parts.
My code reads:
Select Case Width
Case "750"
Component.Replace("part:1", "L:Drawingspart2", True)
End Select
This works fine and when 750 is selected, part1 is replaced with part2.
My problem is then if I want to select "1000" I don't know the part name which I will be replaced by part3 as this could be part1, part2, part4,or part5.
View 1 Replies
View Related
Aug 24, 2012
I have some styles I will like to replace in some drawings but how? I cant find any function to do this.
Dim oIDWStyles As Inventor.DrawingStylesManager
Set oIDWStyles = oDrawDoc.StylesManager
Dim oldstyle As style
Dim Newstyle As style
For Each oldstyle In oIDWStyles.Styles
If oldstyle.Name = "Old style" Then
[code].....
View 5 Replies
View Related
Nov 6, 2013
Writing a rule to find and replace text in a dwg?
AutoDesk Inventor 2012
View 1 Replies
View Related
Sep 25, 2012
I have a script which currently references ThisApplication.ActiveDocument which is fine if you are in the top level assembly. But when I go into a sub-assembly to edit it, I would like the script to get the name of the sub-assembly.
So is there a simple way to get the name of the sub-assembly you are currently editing?
View 1 Replies
View Related
Sep 25, 2013
I am currently doing a migration of files to 2014. During the migration, does windows active window you are working in deactivate while the Task Scheduler is running? Trying to type an email got a bit annoying. Minimizing the Task Scheduler will only work some of the time.
Autodesk Product Design Suite Premium 2014 SP1
ASUS G750JX-DB71
Windows 7 Pro
4th Gen Haswell i7-4700HQ
16GB Kingston DDR3 HyperX RAM
NVIDIA GeForce GTX 770M
View 2 Replies
View Related
