I'm looking for a HDMI, AVI and other input ports that are already drawn up that I can just put into my assembly. Is there somewhere where I can find these? Either online or in the program? I'm very new to inventor I took a class on the basics 4 years ago but haven't really touched the program much after that.
View 1 RepliesI am trying to loft a port shape for a project. I have been able to loft pretty much the same thing when part of a larger model but this time around it keeps giving me an error.
In the past i will loft the whole part then remove the inner portion to get the port.
I know I can adjust the view port margin to increase the view clip to show more reference geometry.
But from what I see, if the drawing is a projected view and I set the margin, it changes the margin for ALL the associated views.
This is not a base view or a view that has other views projected off of it, it is a view projected from a base view.
Changing the margin for this view, changes the margin for the base view as well.
Is there a way to change the margin on just the view you want without having to re-create it as a stand alone view?
After installing Inventor 2009, you may find that other software on your machine now has connection issues such as Apache Web Server, Skype or other servers/programs that are configured to use port 80.
This is because Data Management Server 2009 is configured to connect to that port every time you reboot your computer. If you go to your Windows start bar, select 'Run' and type in services.msc, you will see a list of services. Scroll down to 'Autodesk EDM Server', its' Status' should be labelled 'Started' and its 'Startup Type' should be 'Automatic', which means that this service is started when you turn on your machine, thus connecting to port 80 automatically.
You could change the 'Startup Type' to 'Manual', so that any of your other servers/progams that need to connect to port 80 will function properly, but that would limit the ability for Inventor 2009 and other programs that are configured to use port 80 to run simultaneously. You would also have to manually start this service every time that you require to use Inventor 2009 and the Vault.
If you don't mind EDM Server to hang onto port 80, but you're having connection problems with Skype, then change over to another port for Skype. Open up Skype, goto Tools -> Options -> Advanced -> Connection. If the checkbox is selected for 'Use port 80 and 443 as alternatives for incoming connections', then uncheck it and restart Skype.
So, how do you configure EDM Server to connect to another port? There are four configuration files that need to be changed, so the default of port 80 is not used.
1. C:Program FilesAutodeskData Management Server 2009ADMS ConsoleConnectivity.ADMSConsole.exe.Config
Change port value to 8081:
<connectivity.vaultmanager>
<webServer>
<add key="SSL" value="0" />
<add key="PORT" value="8081" />
</webServer>
</connectivity.vaultmanager>
2. C:Program FilesAutodeskData Management Server 2009ServerDispatchConnectivity.WindowsService.JobDispatch.exe.config
Add port number 8081: <add key="Server" value="127.0.0.1:8081" />
3. C:Program FilesAutodeskData Management Server 2009ServerWebServicesWeb.config
Change port value to 8081:
<connectivity.web>
<server port="8081" sslRequired="false" />
</connectivity.web>
4. C:Program FilesAutodeskData Management Server 2009ServerWebserverConnectivity.EDMWS.Server.exe.config
Change port value to 8081: <webserver runMode="service" port="8081" useHttpSys="auto">
You will have to restart 'Autodesk EDM Server' in services for changes to apply.This should eliminate your connection issues. Why Autodesk has decided to use 80 as the default port number without an easy way to change this through the console is just silly in my opinion.
Possible to have monitoring out of the HDMI port with the IO XT?
View 2 Replies View RelatedI'm running the trial version of Smoke 2013 (latest version) on a Mac Pro. Going out a Kona Card. SDI out works fine, but I'm not getting a signal out of the HDMI? (I know the cable is good, Final Cut works fine...).
View 3 Replies View RelatedWhen using an HDMI link (from my Acer laptop) to an A/V receiver, no audio is sent over the HDMI when using Lightroom5 to play video clips, but it works OK when playing the same clips directly from the files). Playing YouTube videos, and tutorials, also work correctly (audio on the HDMI).(The audio is output from the laptop speaker, and the 3.5mm jack.)
View 5 Replies View RelatedPhotoshop Elements. Increasing brush-size crashes Windows 8 when HDMI cable connected to TV or data projector. I'm using Asus N56V notebook with Nvidia 635M dedicated graphics card with latest driver.
View 13 Replies View RelatedI'm on my paper space layout tab, I double click inside the viewport so I'm in model space, I open the layer properties with the full drop down menu and click on the far right column with the snowflake icon which is suppose to freeze the layer for that particular view port. It does not freeze the layer. I'm starting to wonder if it is something with the program.
View 5 Replies View RelatedI have a 3d object located in model space and have opened up a view port in paper space to view the object. Now I have set up everything as I want this includes several other view ports not showing the 3d object. my problem is that I can use the hide command in the view port containing the 3d object and get the image I want. However switching tabs or doing just about anything causes the 3d object in the view port to revert back to wire frame. Is there a way to lock just the one view port with hide mode on without effecting the rest of the view ports?
View 2 Replies View RelatedMy drawing looks weired. Some texts in model space I can see, but in paper space can not see them. I checke layer and elevation level..., but just couldn't find out. I set different UCS and views in this drawing.
View 3 Replies View RelatedWe have a drawing with multiple viewports, in paper space, When click on viewport no 2 the viewport no1 settings disappear before locking the viewport.
View 4 Replies View RelatedI have a need to find the solution for a viewport issue. Model space, create view, when selected goes to correct view size. When placing same view in layout on paper space the graphics to be viewed are too small & do not fill the paper space viewport.
View 1 Replies View Relateda Villa Drawing I want give a Bath room Detail, so i want off this villa drawing with out bath room. if i have any modification in this bath room automatically changed the bath room detail drawing in model space not for layout using view port... ,if anypossible in model space, what i choose the part only shown ..
View 3 Replies View RelatedWhen I am in paper space I sometimes double click in my viewport. Then the viewport becomes my whole window. How do I get out of the viewport without doing an undo until I reach where I first began?
Also sometimes when I double click in the viewport, but the viewport is the only thing visible in the screen, (vs having the whole sheet and being able to click out) I don't know how to get out without Undo.
My drawing inb model space looks fine, however when I try to set it up to plot in paper space, via the properties box with the "correct scale factor" and the drawing becomes very large. The only scale I can get the drawing to plot at is "fit to page", which is no scale. I have tried to set the scale on the "page setup" and the same thing happens.
View 5 Replies View RelatedHow can I get annotative dimensions to appear in viewports with different scales with text etc. at the same size?
View 9 Replies View RelatedI have been using AutoCad for 2009 and had it all set perfect. Just had a computer melt down and trying to establish everything back how I had it all before.
One little tool that was very useful was a drop down box called, VIEWPORT SCALE CONTROL. I had all my scales in there and used to just click the border in paperspace, click the scale from the drop down box and set your scale. How to get this back.
When setting the viewport scale how do I know if I'm scaling to an A3 plot or A1 etc.
View 9 Replies View RelatedI have a drawing in model space the i drew to scale of 1'=1' and I went to paper scape to put the drawing in my title block using Viewports. highlighted the viewport and went to properties to give the drawing a scale so it would maximize the Viewport area, on my 22"x34" paper. but under the standard scale 1/64"=1' is too big and 1/128"=1' is too small. the simple solution is zoom extents but then in my title block i have to put NTS. I would like to add to the standard scale or be able to set the customer scale to a whole number. EX. 1:1000 or 1:150, etc. etc.
View 3 Replies View RelatedHow to edit the boundary of a view port Insert a segment or delete one. If I remember this was available in PEDIT but now I can not able to do it.
View 1 Replies View RelatedHow to set the view port scale setting in autocad civil 3d i need to print using plan production template.
View 1 Replies View RelatedI'm new to AutoCAD 2013 and I am unable to create new viewports from the "layout" or "paperspace" tabs. The "Model Viewports" are on the navigation bar (the one at the top) but are grayed out and thus unusable and the typical "Viewports" menu from my AutoCAD 2011 (last version I had/used) is not there. I can open the viewports menu from toolbars but am unable to dock it into the navigation bar.
View 9 Replies View Relateddrawing a view port with Polygonal option. When completed it defaults to Dash dot line type which can not be changed in the properties dialog. Civil 3D 2012
View 4 Replies View RelatedI have two view ports on one sheet and the top one has layers not showing that the bottom one has. I can erase and make a new VP and the layers are on.
View 4 Replies View RelatedI have a drawing with multiple view ports and multiple raster images
I can shut the image frames off with "Imageframe" )(tframes) this works fine But it does not turn off the viewport frames.
I've tried putting the viewport on it's own layer and freezing the layer. This looks OK on the screen, the frames are gone. But the plot preview shows there are no images showing in any viewport.
How can I just turn off the viewport frames so when plotting I can see what's in the viewport.
i have a two coordinate one is WGS84 my normal drawing but i want to convert that drawing into Air Port Coordinate system how can we convert any drawing with other coordinate system.
View 2 Replies View RelatedWe have a problem with the view port freeze. When we feeze a layer in the modelspace of a viewport and save the drawing, on re-opening the drawing we find that the layer that was switched off has been switched back on i.e. the saved mechanism does not work.
We have tried copying a view port that works from another drawing into this drawing by that did not work. We have also compared setttings with the drawing that works and the drawing that does not work. But there was no joy.
We think the problem is with the drawing and need a solution preferably with the settings of the drawing. having to redrawing the whole drawing.
I lock my viewports in paper space then I start drawing and editing in my viewport. All a suddenly I will noticed that the image is moving. It seems like the view port image moves out of the port. I then have to unlock the viewport and pan the image back in the port. I have noticed that this is worse in 2013 than 2012. What is the problem here? Is it a program flaw? Is there a way to fix this?
View 4 Replies View RelatedI am working on an architectural drawing and for some reason when I try to "objectscale" the annotation to the same scale as the view port I am using, it doesn't appear or if it does it is a lot smaller scale than I requested.
View 4 Replies View RelatedI created a xref. this xref included some poly line. width is 0.2mm. i need this poly line line weight should be change from different view port. right now this is shown in narrow line width. how can change this line weight at view port?
View 4 Replies View Related