AutoCAD Inventor :: Export To PDF With Many Pages
Feb 26, 2013
For my suppliers i usually send them my drawing in dxf and pdf format. So i created this short Code (in rules area) to simplify exports:
ThisDoc.Document.SaveAs("C:UsersThomasDesktopExports" &ThisDoc.FileName &".dxf",True)ThisDoc.Document.SaveAs("C:UsersThomasDesktopExports" &ThisDoc.FileName &".pdf",True)
My question is about pdf files. All is ok when my drawing have only one sheet, but my problem occurs when my drawing have two or more sheets. In this case the pdf have only one sheet exported, impossible to export all my sheets (only the page on the screen is exported in pdf). Is it possible to exports all sheet in one time.
(Actually i must go to "Autodesk" -> "Create a copy" -> ".pdf" -> "Option" -> "All sheets" -> "Save" if çi want to get a pdf with all sheets)
I use Inventor 2011)
View 3 Replies
ADVERTISEMENT
Nov 15, 2012
I am looking for a macro to export EPS files to a designated folder.
select ability to export a number of pages in one hit.
ability to add the page name, file path as an eps naming convention (saves me renaming).
set the character allowed in in the filename.
View 1 Replies
View Related
Nov 24, 2012
I have a book created (LR4) and cannot get the pages to export as jpg's. I hit the "export book to jpg" button and nothing happens. I am using a Macbook.
View 2 Replies
View Related
Aug 23, 2012
I Can not export book with 103 pages to pdf With Lightroom 4
View 8 Replies
View Related
Mar 5, 2014
I have a InDesign document and I am trying to export to PDF for print. My facing pages are always exported as sinlge pages and I don't know how to prevent that. I can use the interactive PDF as this is for print.
View 3 Replies
View Related
May 20, 2011
Does exist this macro for X5:
[URL]
I'm trying it but it doesn't work for x5, and my previous version of Coreldraw is 10,
View 2 Replies
View Related
Nov 28, 2013
I need to export pages (ie set as default ie pg3 - pg8) as .eps file. we would like to have the page name included as a suffix of the file name i.e. customer_name_2XL.eps
file name is customer name & 2XL is page name.
View 4 Replies
View Related
Feb 25, 2012
Currently I have 30 .xar files that I have to export one by one to PDF, then I have to use a terrible PDF stitcher that cost me $30. Is there a way in either version 6 or 7 that enables you to create a single .xar document but actually have multiple pages within it?
View 5 Replies
View Related
Sep 13, 2012
I understand i can export image to a PDF file format. Is there a way to export a few pages in a single PDF file?
View 3 Replies
View Related
Jun 30, 2013
I have a document with multiple pages. I need each page saved as a separate JPEG file.
I can do this by exporting each page individually, but this is painful - I have 29 pages to export.
Is there any way to export all pages in one step? I would like the JPEG files to be created with the page name as the file name.
View 8 Replies
View Related
Jun 29, 2013
[URL]The example near the bottom shows an unfolded sheet metal part being exported to DXF and there is an option to change the output format in that example. But I don't know how to get to it from a IPT file that is a standard part.
I started with a IPT file and exported as a DWG.Then I created a Layout with the view that I wanted in DXF format and used Save As, selected DFX and I got three DXF files, Model, Layout_1 and Layout_2.
However, I have no way of knowing what format was used for the DXF output. I want AutoCAD version R12. how to interpret the hyroglyphs in the help pages?
Example:
[URL]
Export DXF Options
That page is not useful. It seems to have been written for an earlier version of Inventor. I am still running 2013.
Maybe this is because I have Inventer and I do not have inventor Pro. Is that the problem here? Is this ONLY possible with inventor Pro?
View 3 Replies
View Related
Jul 25, 2013
I am trying to create a template and want all of the revision material to show on all the sheets but the prompted entry that I have put into the template makes me re-enter it every time I change sheets. Is there any way to have it flow through onto all of the sheets instead of having to re-enter all the information.
View 1 Replies
View Related
Sep 1, 2012
Is there a way to automatically put the part list on many pages, instead of warping it on the same page?
View 3 Replies
View Related
Oct 21, 2011
how can I copy inventor drawing sheets? I don't want write everything again. It must be a way.
I use inventor 2012.
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
View 6 Replies
View Related
May 18, 2010
Is it possible to split a parts list onto multiple pages/sheets? My only solution is to place the parts list three separate times on three separate sheets and on the first sheet hide items 11-30, then on the second sheet hide items 1-10 and 21-30, and then on the third sheet hide items 1-20. Is there any other way besides investing in a larger printer and larger paper?
View 3 Replies
View Related
Oct 11, 2013
Program: Inventor 2012
Type: Sheet Metal Mode
1. Right click my Flat Pattern
2. Select "Export Face As"
I select the option and I do FOUR separate test(2000,2004,2007,2010) and save each on accodingly
part_2000.dxf
part_2004.dxf
part_2007.dxf
part_2010.dxf
when I drag each of them into "AutoCAD 2009 - English Version 2" I get this
Unknown value "AC1024" encountered in drawing version.
Invalid or incomplete DXF input -- drawing discarded.
I understand 2010 not able but the last 3 from before 2009. Am I missing something here??
Inventor 2012
View 8 Replies
View Related
Aug 1, 2013
I am trying to export an idw to pdf and i get the error message "HGPMinchoE". I uninstalled inventor and reinstalled, but did not fix error. I am using Inventor Professional 2014.
View 4 Replies
View Related
Jan 3, 2013
For some reason when I export .pdf Adobe Distiller opens up automatically. How to get preview (for mac) to open instead?
View 2 Replies
View Related
Jul 26, 2012
How I can export my drawing in DXF. I have tried the options for dwg files but am not finding the option to export as dxf.
View 9 Replies
View Related
Aug 27, 2013
using Inventor 2012 API
Is it possible to export a ipt file to a dxf file? (no im not talking about the flat pattern) I mean any ipt file sheet metal or not.
View 9 Replies
View Related
Aug 14, 2012
I create idw which contain between 70 and 150 sheets. I would like to export them to dwf, but Inventor will sometimes just hang. I have let it run overnight and it still just sits there. It doesn’t' use up memory or CPU it just stops.
I can sometimes break them into chunks of 20 sheets at a time, but sometimes even then it will hang. We have the same issue on multiple computers and different drawings. I don’t select 3d export just the 2D Is this a known issue... are there some limitations on dwf size?
View 1 Replies
View Related
Apr 2, 2013
I have a multibody part. The last command is a combine the toolbodies saved. (we want to use these in other parts) I have RMB on the bodies that I don't want exported and made sure they are not selected for export. But when I then export as an STL file, all the bodies are exported. Is there a way of exporting just one of the bodies to an STL file? I assume the Export object mentioned when RMB the bodies is for exporting to derived parts.
I'm trying to export just one body so that we can 3D print it, but because all the bodies are exported the resulting file has overlapping bodies, which the printer doesn't like.
So, again, Is there a way of exporting just one of the bodies to an STL file?
PS, Yes I'm still on 2010. We have been told we wil be upgrading soon. How long is soon? IV 2010
View 5 Replies
View Related
Aug 24, 2012
We are looking for a way to export BOM's without having to open individual IDW's.
We were unable to find such a function in either Inventor or Vault Workgroup. We have found customized function for export but each file has to be opened. Is there such a function available that we might have missed or third party?
We are currently working with 2011 versions of Inventor and Vault Workgroup, soon to be migrated to 2013.
View 9 Replies
View Related
Aug 16, 2012
I have a frame that we have designed and detailed using Inventor and Frame Generator. The steel fabricator is asking for a CIS/2 model file to use with their Fabrication/Management software. I have done a search of this forum and found two posts asking about this format (from 2004 & 2009) but neither have any responses.
It does not appear that IV will export this information natively so I am looking for some kind of work-flow to get them this information using AD products. Any resellers out there familiar with a product/translator?
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 4 Replies
View Related
Feb 14, 2013
I have a 3D part that produced from an assembly document. (pic.1). How can I take the coordinates of the curve that is designed on the right surface (pic.2) in a .txt or better .xls file ?
That curve I want to draw it in Excel.
View 2 Replies
View Related
Sep 23, 2011
I often use Inventor to generate 2D views of things for AutoCAD. Once I get the view into AutoCAD, I want to copy the outline, make a polyline of it, decurve it and make a wipe out of that.
This is all well and good until Inventor exports an ellipse in the drawing. They can't be converted to a polyline. So, is there some way to force Inventor to export them as some other entity type or is there a way to convert them in AutoCAD that I'm not aware of? The only two things I've tried are flatten and explode and neither of them works.
View 2 Replies
View Related
Dec 10, 2013
I have problems with exporting a Inventor drawing to dwg autocad drawing, the message I get when a try is: Cannot open XML file: c:....Inventor 2014/InventorCustomization.xml.
View 1 Replies
View Related
Mar 23, 2012
In AutoCAD, when I want to create a 2D block representation, I used the flat shot command. Is there a workflow that will result in creating a 2D block for ACAD from an assembly in IV?
FYI, my customer would like a 2D block representation to insert into his ACAD prints. My assembly is very complex. I tried exporting to .dwg and then opening the file in ACAD and creating flatshots, but it bogged ACAD to a screeching halt.
View 4 Replies
View Related
Jun 20, 2013
This att. doc shows rule for exporting dxf out of drawing. It is working on one sheet just perfect. In multi sheets it save allways with same name. I want to choose from which sheet i need dxf but to be saved by sheet name or model properti name. Is that possible?
View 9 Replies
View Related
Nov 1, 2012
Is there a way to export a Inventor .iam/.ipt to .stp/.sat and keep material property and center of Gravity?
Is there any "external" format that will keep these properties?
View 2 Replies
View Related
Oct 22, 2011
I found a issue that vba reads bom in different way when I tried to export bom to excel. here is the routie i am using for BOM. I am using inventor 2012 sp1, window 7 sp1 and excel 2007
1. create a assembly with bom structured view enabled.
2. open BOM editor in structured view tab. sort BOM by part number, and renumber them from 1,2,3....
3. save and exit.
4. in vba, i used code below
For Each oRow In oStructuredBOMView.BOMRows
Set oDoc = oRow.ComponentDefinition(1).Document
On the export bom excel sheet, the item order is different from BOM in assembly file. on the excel sheet, the order of item number is same before sorting and renumber BOM. It seems to me that BOM editor didnt remember sorting and renumber.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
View 3 Replies
View Related
