AutoCAD Inventor :: Drawing Not Updating To Assembly Changes
Mar 4, 2011
I have a drawing of an assembly with approx. 15 parts. I dimensioned and notated everything on the drawing as I usually would, and everything seemed fine. I have now gone back to that assembly a while later to adjust the position of some of the parts. When I open the drawing, however, these changes do not show up in the drawing environment. All of the parts are still in their original positions, even though in the assembly they are in new locations.
I've checked and it seems that the drawing views are referencing the correct assembly model. I tried deleting and replacing the dimensions, but that does not change dimension value to be correct. I also checked to make sure the "Defer update" box in the Options window is not selected.
If I place a new base view of the same assembly in the same drawing, it shows up with the new locations, but the original base view will not update.
I really would prefer not to delete the entire drawing and start over.
View 7 Replies
ADVERTISEMENT
Nov 25, 2011
I don't understand why my parts aren't updating when I put a hole through them on the assembly drawing? I would expect the part (.ipt file) to get updated with a hole through it when I save the assembly drawing, however it doesn't. Do I have to change a default setting or does inventor no do this?
View 1 Replies
View Related
Nov 19, 2012
I'm using Inventor 2011 and when I go to change parameters using iLogic in an assembly model, (sometimes it is a component suppression, other times it is an iPart component change) it won't update the associated drawing file. I need to go into the BOM on the drawing and renumber the balloons, or change something else in order for the custom iProperties to update in the drawing template. If I just change the iPart component, then the BOM doesn't need to update making the renumbering of balloons redundant.
I'm using iLogic to update all of the iProperties and component references, then reattach balloons. What I would like to do is automatically update the custom iProperties drawing template fields, and renumber the drawing BOM.
View 2 Replies
View Related
Feb 27, 2013
When I create a assembly , no problem , If I modify any parts in the assembly , the mods do not translate to the part file Inventor asks if I want to save the changes but nothing happens , everything is in the correct project folder , I have tried everything I can think of .
I have looked at several posts and comes up with a add on called "Feature Migrator" but Inventor must be able to it by itself?
View 8 Replies
View Related
Dec 17, 2013
I have made an iAssembly with a main body and flanges attached to the body.
Assembly feature holes have been created act on the main body, and these holes are relative to the position of the flange.
When I change the factory member - the position of the flange changes, but the holes stay in the last location and so the model is wrong.
The only way to overcome this error, is if I go to the Manage tab and manually select 'Rebuild All'.
I need this to work automatically as drawings are generated wrong when changing model state.
My intention is that this will be used in an iLogic routine, linked to an external sales package.
View 4 Replies
View Related
Apr 29, 2013
I have geometry not updating after replacing a component in an assembly.
I have drawn part A and in the assembly environment I have projected cut edges on a XY Plane in a 2D Sketch.
After replacing component A in the assembly with part B (not identical but very close) i was expecting the projected geometry to update. But it doesn't. The "local update" button is greyed out in assembly mode. also the Rebuild command does not seem to update the projected geometry.
I can see the new 3d shape and the old projected geometry. How to get the projected geometry to update?
Inventor 2013 Build 176 SP1.1
View 5 Replies
View Related
Jun 14, 2013
Assembly comprised of multiple components all derived from the same master sketch "4 Inch Rail Master Sketch"
Using the sketch to drive geometry, using the parameters to drive various extrude lengths.
Geometry changes seem to propogate quite well, while parameter changes do not...is this a bug or am I doing something wrong? Generally have to open each individual part and "edit derived part" to force changes to propgate...
files attached (move end of part marker down for all .ipts).
View 9 Replies
View Related
Aug 16, 2012
I have a drawing of a part that I want to change the dimensions many times.
When I edit the length and width in the part, the drawing updates automatically.
But is it possible to update the pdf file (of drawing) automatically after editing the dimensions in part?
Or do I have to update (save as to pdf) everytime I create a new dimensions?
View 4 Replies
View Related
Oct 5, 2010
I have crated a drawing of the part. Now I must be updating the drawing template. How I can update the drawing templates to old drawings?
View 6 Replies
View Related
Mar 20, 2012
We have the weight inour title block tied to the mass property.It is set to populate automatically and it does very nicely.
The issue comes when I have an assembly and in the BOM I set certain components to be reference. When I go to Iproperties and then under the Physical tab select update,
the value updates there, but not in the associated drawing title block.
View 6 Replies
View Related
Nov 25, 2013
As this software continues to change it's behavior of function over nite. I am assuming due to new updates in inventor. I can no longer get my drawing to update per changes made to the model. This started about 2 weeks ago.
Change are completed perfectly, I open the drawing and it still has the old model represented. When I right on the view and open the model. Model contains all of my changes, but the drawing does not seem to care or notice that changes have been made and saved. I even closed inventor and reopened.
Even though I'm paid by the hour I really do not want to delete all views and start all over.
So the only answer is to delete all views replace them re dimension them and of course add any time consuming sketches.
10-15 minutes change now is going to take 3 hours. WHY can't autodesk make a stable piece of software?
View 9 Replies
View Related
Jan 10, 2014
I wounder if there is a way to see which dimensions that have been changed when you update a drawing? (after changing the model)
View 5 Replies
View Related
Nov 10, 2013
I made a drawing and later changed the part to an ipart.
The dimensions of the table part in the drawing are o.k. but the iproperties, the contents of the logo doesn't update and it has a strange number string.
There is the yellow lightning symbol and even though i press update all sheets nothing happens and also the lightning symbol remains
View 2 Replies
View Related
Aug 9, 2010
I'm using Inventor 2011 with the style library. I have made some changes to my styles template and want to batch update a group of drawings to the new style. Is there a way to do this without opening each drawing and doing the update?
View 6 Replies
View Related
Oct 7, 2012
So I am using Inventor LT 2012 in a small company that makes conveyor rollers. Most of the time we make the same roller with only different values to the variables. So I decided to make a part with the parameters in an Excel sheet:
A customer call us, and they want a roller with x,y,z dimensions, I put in in Excel and the drawing is ready.
But, when I need to make a second drawing of that roller with different dimensions, the first one also change.
Is there any way to keep a drawing fix when it is done ? If possible, only making a dwg for each customer without having to make an ipt and excel sheet for each drawing would be awesome !
View 4 Replies
View Related
Sep 24, 2012
I'm having trouble showing a reference part in an assembly drawing. When said part is set to "reference" it is no longer visible on the drawing.
View 9 Replies
View Related
Mar 15, 2013
I am working on a large plant piping project and while I've seen this behavior before I've never seen it this bad.
Attached is a screen shot of a small portion of the assembly drawing in which you can see a good example of what I'm dealing with.
At the top you can see a weld neck flange that appears to be attached to air where there should be an elbow. In the middle you can see that on one side of the elbow there is missing geometry.
At the bottom is another flange that attached to air where there should be an elbow. This drawing is littered with these errors and as such is unsuitable for even a reference document.
I have turned visibility of these components off and on without resolution. I have turned on tangent and interference edges without resolution.
I have translated a copy to ACAD to see if it's simply graphical but the ACAD file shows the same errors. I have checked parallel and perpendicularity and all is well.
Inventor 2012 Pro 64bit (Build 219 - SP2)
Vault 2012 Pro Admin
Windows 7 Pro 64bit
Quad Core processor 2.26 Ghz
16 GB DDR3 RAM
1.5 GB Nvidia Quadro FX 4800 (Driver Version 9.18.13.1090)
2 – 320 GB SATA drives
View 3 Replies
View Related
Feb 18, 2013
I want to know if there is any api to check if a particular drawing is a assembly drawing or part drawing.
View 4 Replies
View Related
Jan 10, 2012
how to rotate an assembly drawing using vba codes?
View 4 Replies
View Related
Mar 8, 2005
Is it possible to suppress an assembly feature in a drawing view?We make some components in an assembly oversized and then do a final machine step after welding or brazing. We show the completed assembly in the drawing but would like to see the assembly prior to machining in some views.If I suppress the machining features in the model it affects all views. Can we suppress the features in just one view?
View 6 Replies
View Related
Nov 7, 2013
I wonder if it's possible to see with ilogic if a part exciste in all others view (in assembly) of the same sheet?
View 9 Replies
View Related
Jun 11, 2013
how can I change different colour in a assembly drawing. That means in a single drawing there is so many parts assembled I want to change the different parts in a different colour.
View 1 Replies
View Related
Jun 5, 2012
In assembly mode, when you right click on a part in the tree, you had ''open drawing'' as a choice. Now it's gone in IV 2013. how to add it ?
View 2 Replies
View Related
Jan 16, 2012
Here is the history. I originally created a part with multiple solid bodies.
After creating it I was told we needed to make it an assembly. So what I did instead of recreating each component I called up the original multi-bodied part and did save as copies.
Then deleted the portions of the model I didn't need with only the part needed left.
Then I took all of those parts and assembled them together to form an assembly.
Now, here inlies the problem. When I go to make a drawin gof this assembly all of the balloons are coming up with the same item number as it was when it was a multi-bodied part.
It is clearly an assembly based on the model tree and the file extension.
View 9 Replies
View Related
Sep 21, 2012
Recently when I have placed a view of an assembly into an idw drawing, then try to dimension distances between parts it gives me strange looking dimensions, or no dimensions at all. It looks as though the dimensions are going from the edges of each part at different angles, when I want them to be parallel to the view. I just want the dimension from a line to a line in that view as though it is 2d, but it is acting like it is still in 3d. I do not know if their is a setting that will change this or not.
I attached a screen shot of what the dimensions look like.
View 6 Replies
View Related
Aug 17, 2012
I am trying to generate automated drawing for my assembly and iam trying to run the following code
Imports Inventor.ViewOrientationTypeEnum
Imports Inventor.DrawingViewStyleEnum
dim oDrawingDoc as DrawingDocument
dim oPartDoc as Document
dim oSheet as sheet
dim oTG as TransientGeometry
dim oView1 as DrawingView
[code]....
but when i run the code its asks me whether you want to generate the drawings, but when i say yes shows runtime argument error as show below
Error in rule: Rule0, in document: pin
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
when i ask for more info it shows the following error
System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.Documents.Add(DocumentTypeEnum DocumentType, String TemplateFileName, Boolean CreateVisible)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
View 5 Replies
View Related
Nov 21, 2013
When I try to start a new Assembly or Drawing in Autodesk Inventor Professional 2014 - Student Version, this error shows up:
I tried to copy the file "AmSrv.dll" from another computer and the error is still showing up.
View 1 Replies
View Related
Oct 5, 2012
I have created an assembly containing several parts. I want to export several text parameters of the assembly and parts into the i properties of the corresponding idw so that I can use them in a text block.
View 4 Replies
View Related
Oct 3, 2013
Using Parts created with "As Application surfaces" (only to aid positioning in assemblies). Main assembly built up from sub assemblies which include these parts have the issue on the displaye views in the drawing. When creating drawing views of the Main assembly the application surfaces cannot be hidden by deselecting the "Include All Surfaces" option on each assembly view.
They can be hidden as, shown with an assembly made up only of parts.
View 9 Replies
View Related
Nov 12, 2013
I am working in one assembly. in that assembly i created all the part with using i part & same part i called in to the assembly & created i assembly. while creating drawing i have facing problem to show the model parameters in to the assembly drawing table. How to link the model parameters in assembly parameters with using i assembly.
View 1 Replies
View Related
May 3, 2012
I've got some IGES files, which I want to place into an assembly, and then create a drawing of the assembly.
If I open the IGES and place it in a drawing it works. If I create an assembly, place the same part, and then try and put the assembly into the drawing it doesn't work.
Attached is the IGES file. I'm using Inventor 2011.
View 9 Replies
View Related
