AutoCAD Inventor :: Creating A Wind Turbine
Oct 14, 2013
For my first project we had to create a portable wind turbine, so i've designed a turbine (sketch included as an attachment).
I've worked  a little bit with inventor in the past but my experience is unfortunately not so great and i stumbled on creating the ' blades' for this turbine. I also included my ipt ant iam files.
- additional info-
one blade makes a total curve of 120 degrees
one blade has a width of about 80 mm
the length of the tube is 700mm
the diameter of the turbine is 300 mm
View 2 Replies
ADVERTISEMENT
Jul 24, 2012
I am into tracking solar array's. So designing for high winds is paramount. I wonder if Inventor will have a package for analysis of wind loads. It is a different kind of FEA. Call it a 3-D distributed load.
View 5 Replies
View Related
Jul 12, 2012
We created a wellhead stand (top and bottom plates has od of 18" and the body has od of 16.75" thk of 0.5") and ran the stress analysis.
Because we have a cylinder attach vertically to the wellhead stand, so we added the gravity and force (40,000 lb) on the top plate.
Our question is about the wind load. We know there has a software call robot structural analysis but that is not an option yet. And we looked up other pages and knew that we can convert the wind load to pressure. Basically the wind load is on the one side of the hydraulic cylinder (around 13feet tall and od of 6") and rod (around 12 feet tall and od of 4"). But where do we add it to the wellhead stand? on the top plate (flat face) ? or the body (cylinder)?
We attached a sample part. the orange parts = hydraulic cylinder. the green part = top plate. the magenta part = body.
View 3 Replies
View Related
Oct 1, 2010
My model has turbine engines complete with blades.
After attaching the engine to the rest of the model, I tried to animate the blades using Cycles, however, because the engine itself is attached with a 15-20º incline, the blades do not rotate around -360 properly. The illustration below shows the blades at the -89º mark.
How do I reset the pivot point for the Rotate Tool, or at least compensate for the offset pivot?
View 5 Replies
View Related
Dec 1, 2007
I was fallowing your the directions to make fire text but when it got to the part to use the wind filter it was there but not highlighted so i could use it!! Any ideas why and how can i fix it? Before you ask I have photoshop cs2 updated!!
View 3 Replies
View Related
Jun 7, 2008
I recently got Ps CS3 and I love the wind filter in CS2 but in CS3 the results come out way different. I was wondering if that is the new wind filter or is there some thing wrong. Is there a way to fix it.
In CS2 the wind effect showed up outside of the text, but in CS3 it is showing up inside the text.
View 3 Replies
View Related
Feb 3, 2007
I am trying to make a wind effect on some text. at first this was working and looked really good. but later i tried doing it again on some different text and instead of giving the wind effect, it just kinda put horizontal lines through the text.
View 1 Replies
View Related
Nov 8, 2008
I'm reading a tutorial to do some stuff and it says to use wind so yeh i go to Filter, Stylize and walla there is no wind?
Half of my filters are missing I think, is there a place I can download them?
View 10 Replies
View Related
Feb 26, 2005
i have just got into image editing (got photoshop 8 cs last week) and i have been learning from tutorials. the first image i did used the wind effect to make the text look like ice. and i want to use it again. the first time i made the ice text it all went fine, but when i want to use it again it wont work. when i click wind, instead ofthe wind effect coming OUT FROM the text, It goes INTO the text, like its inverted or something.
one other thing, i saw in the flash movie of photoshop that you can change colours of different things, eg, cpply the texture of a chicken onto a fox, or turn a black woman into a white woman.
View 7 Replies
View Related
Oct 23, 2005
how to do this effect to an image, it looks like some kind of wind effect, but it is directed to the center of the image and I don't know how to do that,
how they made the black lines that are near the eyes of the cyborg ninja....
View 9 Replies
View Related
Apr 30, 2005
I've had this problem with the wind filter for a while now. For some reason, when I try to apply the filter, the actual wind effect doesn't appear. Instead, part of the object is cut away, as if the background was being "blown" onto the object. I'm usually applying the filter to text,
View 2 Replies
View Related
Apr 22, 2006
I have been trying to do the flame letter effect but when I open a new document and type the text, then go to Filter>Stylize---
View 5 Replies
View Related
Jun 15, 2004
it looks like a smear or wind effect and I have a picture that I would like to use that I would like to make look similar to this one.
View 2 Replies
View Related
Sep 6, 2005
I'm wondering how to do glowing text over a background image. What I am looking for is the technique used on the title text from the show "Smallville"
Here are the restrictions:
-Background image (obviously background layer)
-Glowing text (but not regular font. I made some font and just saved as black and white image)
I have spent a while looking for the technique, but nothing seemed to work well. I applied a Gaussian filter, weird polar coordinates thing (seen from another site), and Wind effect.
The wind effect seems closest. However, when I force a black and white text image to have the wind effect, the background of the white glowing text remains black and it looks bad if I just make the black transparent.
View 4 Replies
View Related
Aug 19, 2004
One problem which i have and it seems that it is really taking wind out of me.... Th problem is one of my client requires a effect of PAGE PEEL... means we have a scanned photograph and we want to give a realistic effect that someone has teared that photo from right top to center... I really try out all the things which r there in my book but couldnt get one..
View 3 Replies
View Related
Apr 23, 2009
am attempting to use the wind filter on text but when I attempt to use the filter it is greyed out and not available.I have followed several turorials and attempted to look it up in a book I have but am missing something. I have typed the text on a background, rasterized it according to instructions, then when I attempt to use the filter it is greyed out and I am not able to select it.
View 3 Replies
View Related
Jun 16, 2011
What would be the best way to create a wind tunnel model that you can then put different shapes into to see how aerodynamic they are and look at the friction and turbulence?
View 2 Replies
View Related
Jan 11, 2013
my Wind Filter is not creating the "tracers" or "trails" that I am used to seeing.My goal is to create a motion effect on white text. The "tails" are not growing in length when I duplicate the filter over & over like it should.
Â
Example: This is the text after applying the filter once.Here is an example after the 3rd time of applying the Wind Filter.
Â
the streaks are remaining within the text. It's not creating the trailing streaks that I need.
View 2 Replies
View Related
Dec 23, 2012
I use the wind tool a lot and here recently it's been blowing into my layer instead of away from it. No matter what kind of layer I present it always blows into it.
View 3 Replies
View Related
May 11, 2012
Using Corel VS X4. I am trying to reduce or remove wind noise from video clips. These clips also have narration, which at times is inaudible due to the background wind noise! Any way to remove or reduce this background noise?
View 2 Replies
View Related
Jan 30, 2006
For long time I am trying to learn a trick in Photoshop. [I am on Photoshop 6 by the way, so please, don’t laugh. I am on Windows XP]
I am talking about background removal. I have thoroughly searched Internet for articles on this topic. I found many ways to remove an object from its original background. All those methods work just great. But, there is one think I never was able to accomplish. I was never able to delete background from within such part of the photo like hairs fluffing in the wind, or hairs ruffled by the wind.
I can easily separate an object with clear edges from its background. But how can effectively remove background from behind hairs on this photos?
View 2 Replies
View Related
Apr 11, 2009
I have an error that pops up saying "Could not complete the Wind command because there is not enough memory (RAM)."It has nothing to do with saving. I can do some smaller things like Render/Difference Clouds, but not that. Also my white colors appear a little peach colored.
View 10 Replies
View Related
May 26, 2004
i have a bit history of 3dsm5 and psp, 2 weeks ago i started with PS and I love it very much so far, but I have a problem that's bugging me were i can't get around.
When I want to apply the filter "Wind" effect then this effect goes inwards into a layer, and i want it to go outwards.
View 9 Replies
View Related
Dec 4, 2002
After some time my filter->wind doesn´t work properly. Instead of the wind going outside the figure it makes it go inwards. I mean the area of the figure decreases instead of increasing.
View 1 Replies
View Related
Apr 24, 2013
Are there any options in 3ds max to create wind force coming from the opened window?
I've just created simple scene where curtain hanging near closed window. I want to open the window and put some wind to the room. I'd like to move one part of curtain (the nearest to window) but now my wind force doesn't see wall and all curtain is moving.
How connect collisions between wind force and wall in 3ds max 2012?
View 1 Replies
View Related
Jan 27, 2012
When the wind space warp is used, what series of mathematical equations or algorithms is 3ds Max invoking to generate motion based on an input force, turbulence value, etc.?
Are traditional fluid dynamics equations embedded into the calculation process? Is there any way to specifically see how the wind force (strength) and turbulence are interpreted to cause the modeled motion?
Is there any way to switch between wind force (strength) and wind velocity?
Lastly, if one were to have an object billowing in a breeze, is there any way to track the coordinates of a vertex at each point in time? The closest I've come is manually extracting the object's box dimensions at each interval - I would prefer to track how a fixed point on the object moves over time.
View 3 Replies
View Related
Aug 20, 2011
I have Xara Design Pro 7, is it possible to make a Flag wave, like a real flag in the wind?
View 5 Replies
View Related
Apr 18, 2011
Noticed that when you change the wind roses in Vasari from Knots and km/h to m/s the conversion must be wrong? Â I have even imported my own weather files thinking the data might just be wrong.
View 6 Replies
View Related
Sep 17, 2013
I'm having an issue creating a DXF from a IDW. After selecting the DXF option I get a message "Problems encountered while saving the document". Why the error occurs and how to remedy it?
View 1 Replies
View Related
Feb 27, 2012
is there a simpler way of creating these patterns or a way of doing less work to create these patterns?can this be accomplished with a formula/ function?
View 4 Replies
View Related
Jan 6, 2014
I'm recently using inventor a lot. But now IM try to make a .IDW template with my own line styles and thickness and stuff. This is what I do:
I open an exciting IDW file. I go to manage and click style editor. Then I create a new style. Called test style. Â I make sure I activate my new style and I go to layers, where I change the line weight from 0.51mm to 0.25 mm (example)
I save my change and close style editor... After that I save my copy as template (called test 6-1) and close the drawing. I open inventor and create a new file. Select the template I created. I get this style conflict.... I don't fully understand this error... How can I fix this problem?
When my new template opens, I check the line weight by the style editor but the weight detente change... Its still 0.51 mm.
View 4 Replies
View Related
