I am trying to delete fill from a sketch I have done on a drawing. (See attached). Unfortunately I cannot find any way to delete without deleting the whole sketch. I tried as Inventor said to go into Annotate Ribbon and change Layer & Style but both these dropdowns show blank when I try that. I also tried going into Fill/Hatch again hoping the new one would overwrite the old one but no success.
View 4 RepliesI played with adaptivity status of part 27 and sketch 3 in that part, and i now i cannot delete the sketch.
The delete command isn'ton the RMB and when i press Delete nothing happens.
How can I delete some points that show in my sketch like these (see the attachments). by the way, they are related to sketch constrains?
View 6 Replies View RelatedI want to delete the inital Sketch (if was already opened) that Inventor creates when a new part is added.
I have tried this, but doesn't work.
Sketch sketchActive = docPart.SketchActive.
sketchActive.Delete();
I have a sketch reference that is giving a cross part failure error. I am unable to select the reference in the browser so I cant delete it or update it.
How to get rid of it. Deleting the sketch and starting again will be a disaster.
Using 2011SP2 XP64.
I wish to delete all project geometry in the active drawingsketch with 1 click
But unsure how to get to these constraints.
Are these geometricConstraints?
What I have now doesnt work:
Select Case ThisDoc.Document.DocumentType
Case 12292:
Case Else: MsgBox("Current Document not a drawing document")
Exit Sub
End Select
[Code] .......
Constraint to unresolved reference geometry. Finding these magenta broken links items in a sketch is time consuming. Is there a macro that can delete them all?
View 2 Replies View RelatedIs it possible to fill an area with hatch patterns in a feature sketch (ipt sketch), not in idw sketch?
I want to show a safety screen (wire mesh) in a 3D model, in order to reduce the file size, I do not want to do solid wire mesh in the model, but the sketch only. I was drawing one by one line and make a hatch cross lines in the sketch, it took me lots of time to draw these lines.
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedWhen I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedI'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies View RelatedOkay, so it's been a while since I've done one of these, and I haven't done one on 2014 at all yet.
I've got a fairly simple part, it's about 6" long x 3" wide, less than 3/8" thick, without a whole lot of complex geometry to work with. I've built up my whole mold for it, and that went okay, but the fill analysis seems like it's taking forever. Like hours. It gets to the "Fill" stage, gets just a sliver of green on the progress bar, and then sits.
Last time I tried this was on my workstation at the office, using 2013. It didn't take nearly this long, and the part was much larger and far more complex, with a significantly slower computer.
Is something broken with this in 2014? I guess I can just let it run overnight, see what happens in the morning ...
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
I am having trouble when tracing a sketch to convert it to vector. I have tried scanning it into photoshop first then exporting it to illustrator, and also just scanning in as a jpeg and opening it in illustrator.
The trouble I am experiencing is that the lines are not clean, but appearing very grainy. When i choose Fills I get the best result, but with Strokes i get 2 thin lines and obviouly no fill.
Either way I can make the color of the lines all the same, but am unable to create objects within the lines to fill with color, such as face, sunglasses, etc. I can do it with live paint but I know there are other ways to color in files in AI.
Here are the original, the fill, and the stroke result outcomes
Here are the files on dropbox [URL] .....
A coworker asked this question. Unfortunately she works about 2,000 miles from me. The delete key on her keyboard is suddenly bringing up the "fill" box.
My guess is she somehow changed the keyboard shortcut from "shift F5" to delete.
This seems to be the opposite of a problem which arose with Content-Aware Fill.I am a fairly recent (starting with CS5) user, and I am used to the Delete key bringing up the Fill dialog. However, this has stopped happening, and when I select a portion of the background layer and press the Delete key, it appears to delete those pixels. I would like to return to having the Delete key bring up the Fill dialog.
View 6 Replies View RelatedThe reason I've downloaded it is to see if I can change some of my photos by removing a person. I've watched the video on moving a person and I can do that, but I don't know how to delete them and then fill in the space with plausible background.
View 1 Replies View RelatedI am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
View 1 Replies View RelatedJust installed inventor on a new PC. When I go to sketch a line it appears to be drawn but nothing is being created.
View 4 Replies View RelatedIs it possible to offset this 3D sketch1, it must still follow the curvature.
View 9 Replies View RelatedInventor 2011 will not offset polygon in sketch mode. I get "Method not supported for transient meta" error message.
View 9 Replies View Relatedis it possible to create 3D sketch from text?
I need it for engraving as a toolpath and for drawings.
Emboss tool is more suitable for styling and visualisation.
Attached sample from Pro-E:
I need to print an initial 2d sketch (without any 3d work done on it).
Printing this in sketch mode seems to output a screen capture, i.e. some lines appear wriggly and not as precise as an ordinary plot of an idw or dwg file.
A sketch w/o any 3d work will not be accepted as an idw file, thus I am not able to use all the formatting (tblocks, fonts, dimstyles, etc.) options available to idw files.
Is there a way of printing a 2d sketch (w/o any 3d work) as an idw file?
I've managed to hack together some code to draw a rectangle and dimension it. Now I want to constrain it to the origin. I figure either using two dimensions from a top/side to the origin and setting the dimension as half of the other respective dimension would work. Or constraining the center point of a top/side line to be vertical/horizontal to the origin.
The problem I'm having is I do not know how to reference the origin. So until I figure out how to reference the origin point I can't use either method.
Public Sub DrawSketchLine() ' Check to make sure a sketch is open. If Not TypeOf ThisApplication.ActiveEditObject Is PlanarSketch Then MsgBox "A sketch must be active." Exit Sub End If ' Set a reference to the active sketch. Dim oSketch As PlanarSketch Set oSketch = ThisApplication.ActiveEditObject ' Set a reference to the transient geometry collection. Dim oTransGeom As TransientGeometry Set oTransGeom = ThisApplication.TransientGeometry Dim oUOM As UnitsOfMeasure Set oUOM =
[Code].......
Is there a way to update a symbol of one type, without the changes being applied to all symbols of that type in the drawing?
Example: If I have three Flag Note symbol's in my drawing from the same sketch symbol and the text reads 1, is there a way that I can change the text to read 2 in one of them without the other two flag notes updating as well?
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800
I keep getting this error adding a sketch to any view in an IDW... What might be causing this error?
View 1 Replies View Related