AutoCAD Civil 3D :: How To Use A Generic Link Slope

Dec 4, 2013

I haven't had to use a generic link slope in a while, but I'm baffled as to why this isn't working for me. Below is my assembly which looks looks fine, but the corridor is doing the opposite of what it should be doing. 

And here is what the corridor is doing.

My grass strip link is going in the opposite direction and it's much longer than 7 feet. Am I missing something or is this another bug?

Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM

View 4 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Link Slope To Surface

Nov 7, 2012

in my link "link slope to surface", i have the slope set to -2.00%. in the cross sections, it is at a +2.00%. why is this thing not linking at the defined -2%? see image.

View 1 Replies View Related

AutoCAD Civil 3D :: Link Slope To Surface Projection?

Nov 21, 2013

I am re-routing a small stream. I am using generic links for the bed and side slope. I whant the side slope to be 3:1 and project beyond the existing culvert wall in the eg model. can this be done easily?

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram

View 2 Replies View Related

AutoCAD Civil 3D :: Subassembly Composer - Link Slope To Elevation

Oct 8, 2012

Its a embankment crest (dam wall) and then sloping down at an angle to a target elevation. I want it to shoot through my topo / surface and then apply a boundary later.

It looks fine in Composer but doesn't show up in C3D - only straight line. Would like the same outcome as the Generic Link Code - LinkSlopetoElevation.

View 4 Replies View Related

AutoCAD Civil 3D :: Link Slope To Surface With Maximum Width

Nov 20, 2012

From the subject is there any way to apply Link slope to surface with maximum width 

View 1 Replies View Related

AutoCAD Civil 3D :: Transitional Lanes And Link Slope To Surface

Aug 4, 2012

I am having trouble getting my assembly to work in my corridor.  I have a Basic Lane Transition subassembly with a Link Slope to Surface subassembly attached to it.  The assembly follows my centerline alignment and the lane widens as designed out to my offset alignments.  The slope grading to daylight works fine until the transitional lane starts to widen, then the slope assembly stays at the same point on the lane and does not stay linked to the end of the lane. 

I am also having trouble getting the subassemblies to attach to the proper points.  I keep trying different OSnaps unitl one seems to work, but I am never sure the subassemblies are connected properly. 

View 9 Replies View Related

AutoCAD Civil 3D :: Profile Geometry Editor - Slope-Slope Intercept To Place PVI

Aug 20, 2012

Can you not perform a slope-slope intercept to place a PVI?  Essentially holding the sta and elev of the PVI's directly before and after the PVI of interest and changing the grade in and out so that the sta and elev of the PVI of interest are changed.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Match Gutter Slope To Outside Lane Super Subassembly Slope

Mar 22, 2011

Can't figure out how to match gutter slope to outside lane super subassembly slope.  Have super eop targeting a feature line with elevations, but when i check section editor gutter slope doesn't match pavement slope.

Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600

View 9 Replies View Related

AutoCAD Civil 3D :: Shoulder Subassembly That Varies Slope In Relation To Lane Superelevation Slope

Jan 22, 2013

i need a shoulder subassembly that varies slope in relation to the lane superelevation slope. i know that i can get a subassembly for the shoulder that will follow the alignment superelevation xml data but in my case i can't use it because we are just adding a shoulder to an existing road. we're not changing the superelevation of the existing road, just milling and overlaying and widening. right now i've created a profile of the outside edge of the shoulder that gives me the correct shoulder slope but whenever i change my centerline profile i have to redo the shoulder profiles which is a real time suck.

View 9 Replies View Related

AutoCAD Civil 3D :: Slope To Depth Of 10 Feet Than Change To 2:1 Slope

Aug 13, 2012

I am in the process of transitioning from land desktop to Civil 3D. I design roads in steep terrain and sometimes need to have my catch (daylight) slopes change. So my question is, how do I change a daylight slope at a specified depth? For example, from the shoulder of the road I want a 3:1 fill slope to a depth of 10 feet than change to a 2:1 slope until it catches the existing surface. Can this be built into a subassembly such that if the fill is less than 10 feet it will daylight correctly at a 3:1 and if the depth is greater than 10 feet then it carries the 3:1 for 10 vertical feet and then changes to the 2:1 until it daylights?

View 9 Replies View Related

Premiere Pro :: Unable To Link Clips Due To Generic Import Error?

Feb 13, 2014

I am using Premiere Pro CC, up to date, on Windows 7 Pro 64 bit.  After week's vacation opened large project to find all clips offline.  When I linked, they located fine but OK produce "the importer reported a generic error".  I know the clips are on their hard drives and have not changed position.  I am not sure of next step.  I have always been able to link before though have not used "locate" dialogue box.  Checking other projects reveals consistent problem with importer.

View 1 Replies View Related

AutoCAD Civil 3D :: Generic Links Colour

Jan 31, 2013

I'm building a simple subassembly from generic links and some of the links are blue and some magenta - Is there any significance to this colouring?

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 1 Replies View Related

AutoCAD Civil 3D :: Updating Map - Generic Leader Style

Feb 4, 2013

I am updating a map and besides manually creating my own block for the "arrow" of the leader. Is there more then one generic leader style I am unaware of to make life easier?

View 1 Replies View Related

AutoCAD Civil 3D :: Add Feature To Surface - Get Generic Numerical Name

Jan 16, 2013

When I add features to a surface, they don't keep the feature name. It gets a generic numerical name ie dike:1, dike:2. Is there a way to get the names to hold? How does one keep track of the features/breaklines?

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation

View 1 Replies View Related

AutoCAD Civil 3D :: Subassembly - Generic Pavement Not Showing Its Parameters

Jan 15, 2013

When i am creating a assembly, the sub assembly parameters for the generic pavement structure is not showing (such as the lane width or crossfall) Other sub-assemlies show these parameters. Is this a bug or is there a way i can turn this on.

I can change the parameters on the properties.

View 3 Replies View Related

AutoCAD Civil 3D :: Slope Map Display

Jul 1, 2013

The undefined areas of a slope map now have a hatch to them and are plotting black. This map was created a month ago in 2012 without issues, upgraded to 2014 and now the undefined range has hatch! 

View 8 Replies View Related

AutoCAD Civil 3D :: Get The Slope At A Point (x And Y)?

Jan 2, 2012

I have a TIN Surface, and I want to get the slope at a point (know X and Y).

Working Civil 3d 2010 and API.NET

View 9 Replies View Related

AutoCAD Civil 3D :: Using Negative Cut Slope

Oct 30, 2012

I have a simple driveway corridor along a steep hillside.  For cut, I would like to have a negative slope away from the shoulder edge.  I have tried numerous approaches and all 'cut' reverts to positive.  I searched and found no clear answer.  It's such a short driveway, I can 'fake' it in, but I would like to calculate quantities. 

Using 2012 sp1, 64bit, windows 7

View 9 Replies View Related

AutoCAD Civil 3D :: Can't Display More Than Two Slope Ranges

Jul 8, 2013

I've got a surface that displays contours correctly. When I go to Surface Properties-Analysis tab, I can  set an arbitrary number of ranges for contours, directions, elevations, slope arrows, etc, and they display correctly.

I can set an arbitrary number of ranges in the slope range box too, but when I click the Analyze button, Civil 3D 2014 hotfix 1 only displays two slope ranges: 0% to 2979736.0077% and 2979736.0077% to 99999900.0001%. (!)

View 9 Replies View Related

AutoCAD Civil 3D :: Auto Slope Patterns?

Aug 10, 2013

Can I automatically have my slope patterns introduced with a command like matchprop or something similar ?

I have 284 streets and it's getting ages to finish the slope patterns on every street. Civil Engineer / Infrastructure of metropolitan transports. URL....

View 6 Replies View Related

AutoCAD Civil 3D :: How To Round Off Top Of Graded Slope

Mar 21, 2013

I'm trying to match an existing slope design that has a soft rounded off top of slope.  The toe (green) is a feature line and I'm using a 1-1/2:1 slope to natural surface grading rule.  You can see the rounded contours in blue that I am trying to match.  

View 7 Replies View Related

AutoCAD Civil 3D :: Determine Elevations Along Slope

Dec 3, 2013

I need to project a surface/grading (or something of that nature) across my berm and have it intersect with the inside bank. This is better explained if you see the attached image. In the plan view you see 4 featurelines. Outside TOE, outside TOB, inside TOB then inside TOE. I need to project the outside TOE across the berm (shown in the section view) then create a new featureline where the line and inside slope of the berm intersect. Note that all the elevation shots vary as does the widths across the berm. What's the best way to do this?

View 9 Replies View Related

AutoCAD Civil 3D :: How To Calculate Average Slope

Feb 20, 2013

What formula Civil3D uses to calculate the average slope of a surface?

The formula I am using is S = I*L/A

S = Average Slope
I = Contour Invertval
L = Length of Contours (ft)
A = Area of parcel (sq. ft)

I just had to do four parcel calcs and the percentage I find using the formula is always 1-3% lower than the percentage Civil3D spits out. I can't find anything about how Civil3D arrives at that number, it just appears. I assume that Civil3D is more accurate but I can't give that number to a client without knowing how the program arrived there.

View 1 Replies View Related

AutoCAD Civil 3D :: PVI Profile On Corridor Slope

Oct 1, 2012

I created a profile view in order to create a corridor, I want the profile PVI stations to be on the same plane,

View 1 Replies View Related

AutoCAD Civil 3D :: Superelevations And Sub-base Slope

Jun 11, 2012

I need to have a subassembly for a superelevation where the lane and base slope to the left and the bottom of the sub-base will slope to the right. I was using the LanSuperelevationAOR subassembly, which worked fine with my superelevation when the lane, base and sub-base were all sloping the the left, now I need to edit the slope of the sub-base only to slope back to the right at a -2%.

Windows 7 x 64
8GB Ram
Intel Xeon CRU 4 Core @ 3.07GHz
Civil 3D 2012 .....

View 1 Replies View Related

AutoCAD Civil 3D :: Slope Analysis - Ranges Set To 10

Oct 12, 2006

I can not get the slope analysis to come up with 10 slope ranges. My ranges are set to 10, but my Range details populate to 22? Screen Cap included. I've tried this with Equal Interval, Quartile, and Standard Deviation. Nothing will create 10 intervals.

My "slope analysis" surface style is set to show Slope, with the range set to 10. In surface properties, my range is set to 10.

View 9 Replies View Related

AutoCAD Civil 3D :: Slope Symbols For 3d Polylines

Sep 20, 2013

I use slope symbols instead of contours to keep my maps less busy.  Unfortunately I can only change my cut style and fill style to slope symbols with grading by right clicking on the little diamond in the grading and selecting grading properties.

I have created a surface with 3d poly lines not by creating grading and got contours that way, How can I create the slope symbols in a surface.  I tried xploding them and then creating a block and using the measure tool on the 3d polylines but it doesn't do anything. 

Picture 01 is the contours

Picture 1 is the contours turned off and cut/fill styles turned to slope symbols.

View 6 Replies View Related

AutoCAD Civil 3D :: Slope Of Surface After Kriging

Apr 5, 2013

Please find the attached picture. It shows a surface with its data points. I extended the surface to the outer boarder shown by kriging. The slope of the surface that was added with the extension (past the data points) has an upward slope that was generated. I need the surface to stay level with the data points that are there.

How to avoid that added slope when extending a surface?

View 7 Replies View Related

AutoCAD Civil 3D :: Add Slope Markings On Corridors

Apr 18, 2012

Trying to add slope markings on my corridors, and the only way I can find is to do it in the Corridor properties > Slope markings, then click add slope pattern, which asks you to select featurelines top and bottom of slope.  Surely there is a way to simply switch on or off slope markings where in cut or fill?

View 7 Replies View Related

AutoCAD Civil 3D :: Slope Analysis By Direction

Mar 27, 2012

I need to be able to do a slope analysis on a surface, but I need to have it calculate the slope in a direction - east and north.  Any way to do it?  Maybe even if there is a quick way to apply slope labels to a surface based on a grid - say the slope from N0.00, E0.00 to N0.00 to E 25.00

View 9 Replies View Related

AutoCAD Civil 3D :: Super Elevation Max Slope At 2%?

Mar 22, 2013

I am using Civil 3d 2013 and I am trying to calculate the superelevation information in which the curve will max at 2%. Is there a way in which the superelevation can be calculated using the superelevation wizard in which a 2% SE is the max? So far it will only let me use the SE for 4% local roads and I have to edit it using the SE layout. 

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved