AutoCAD Civil 3D :: Holes In Culdesac Bowl Corridor
Aug 2, 2013Any clues as to why I am getting holes in my culdesac bowl corridor? I have generated it using centreline alignment and bowl kerb alignmentRichie
View 5 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Moved CulDeSac And Now It Won't Rebuild Within Corridor
Aug 4, 2013I had a corridor built with a CulDeSac on a side access road. Problem I was running into was the daylighting from the assembly on curve so I finally decided that I needed to move the CulDeSac 20 feet further down the road. I deleted the CulDeSac region and when I did that the Final Grade for the EOPs profiles were deleted with it. I then moved the EOP alignments (Left & Right side) 20 feet further down the road and readjusted the start and ending of the alignments. Then went back to the existing grade profiles of the EOP alignments and redrew in the Final Grade profiles. I added back in the Regions for each Baseline and set the targets to Road CL Alignment and Final Grade Profile. These are the exact same steps I took originally to build the CulDeSac the first time and it worked great. Now it won't even build the CulDeSac.
When I deleted the region the FG of the EOP disappeared, but actually still showed in the Toolspace so the new FG profiles with same name were seconds/duplicates. Once I saw that I deleted the originals from Toospace and renamed the duplicates and used them for the Baselines.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
AutoCAD Civil 3D :: Holes In Corridor Surface?
Jun 21, 2013I've created a corridor with kerbline widths targeting featurelines. I've created the corridor at 1m centres and have added a number of individual points to ensure it properly picks up all of the geometry of the target featurelines. However, the surface that has been created has numerous holes in it along one side and I can't understand why.
View 4 Replies View RelatedAutoCAD Civil 3D :: Surface Corridor Is Not Triangulating Entire Corridor Boundary
Sep 14, 2012I have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies View RelatedAutoCAD Civil 3D :: Copy Corridor Or Corridor Station Values Only?
Dec 13, 2012Copy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
AutoCAD Civil 3D :: Corridor Surface Is Not Matching Corridor Top Links
Mar 21, 2013My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
AutoCAD Inventor :: Cannot Split A Bowl?
Apr 9, 2012I modified a box build in Inventor in Fusion and then imported it back into Inventor as a bowl. I am trying to split the bowl in half and create an assembly drawing which I can submit. When I try to split the bowl I get and error message: "The attempted operation did not successfully complete due to unforseen problems. Try with different inputs or outputs." I've attached the file in case you want to try yourself.
View 2 Replies View RelatedAutoCAD Civil 3D :: Grading Objects - Holes - No Contours
Mar 1, 2013I have grading objects that are to match existing grade. However, When I grade to match surface, I get missing countour data.....
View 1 Replies View RelatedAutoCAD Civil 3D :: Creating Infill Grading - Filling Holes
Oct 12, 2012creating infill at the grading example from the civil 3d tutorial "filling holes in a grading" (grading-6.dwg) failes when selecting the area to fill. The command finshes whithout changing the model. There is no diamond symbol displayed.
Why i am not able to select the area?
Photoshop :: White Bowl Color Change
Nov 13, 2013I am trying to change bowl color white green .
View 2 Replies View RelatedPhotoshop :: Place Man Inside Fish Bowl
Oct 19, 2004I have 2 images, a fish bowl and a man. I am trying to place the man in the bowl so that he looks like he is behind the glass. So far, I have tried masks with at different opacities and blend modes and the two photos in different stacking orders in the layers palette. I am not happy with these results because you can see through the man into the background of the fish bowl.
View 6 Replies View RelatedAutoCAD Civil 3D :: Gap In Corridor
Jun 13, 2013C3D 2014
when I created a Top surface, C3D showed me otherwise. I need a gap at an intersection. In the attached DWG the intersection corridor has been removed from view by isolate.
I used 2 seperate baselines to force the road corridor to have a gap at the intersection.
Looked OK .. except ..later .. when I created a Top surface, only the first baseline is used to create the surface, the second baseline is skipped : (
I obviously did not make a gap correctly. What is the correct way? Or.. is there no way .. must the designer create multiple seperate corridors when the road has gaps?
AutoCAD Civil 3D :: How To Get A Continuous Corridor
May 2, 2013I have a very basic question about creating corridors. As you can see on the attachment, i created an assembly consisting of ditch and my own polyline subassembly and turned it into a corridor. The ditch part is drawn out correctly, but the other part (supposed to be a gravel road) has only sections in certain points.
View 4 Replies View RelatedAutoCAD Civil 3D :: DWF Corridor Quality
Dec 29, 2013I started playing around with 3d dwf's. I'd like to share my corridors in a 3d dwf viewer or something similar but when it opens in design review, everything is skewed/ jagged/garbled. The other problem is that it exports everything (assemblies, alignments, sections etc.) so it make viewing navigation difficult in the viewer for people that aren't CAD savvy to begin with. It would be ideal if you could select what you want to export similar to exporting a wmf file.
How do others share 3d models with non-cad people?
AutoCAD Civil 3D :: Where Is Corridor Surface
Mar 21, 2012When i try to create a material list, i don't see my corridor surface - just the EG surface appear in the list.
View 2 Replies View RelatedAutoCAD Civil 3D :: Add Subassembly To Corridor?
Nov 18, 2013We are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly. The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified. how to add a target for a sub that is added after the corridor was created?
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
AutoCAD Civil 3D :: Alignment From Corridor
Feb 7, 2013When creating an alignment from corridor feature (ditch invert level), the created alignment is not following the selected line (see image bellow). The alignment seams to be created from the first point of the feature line to the last point and ignores all the other points. The vertical alignment created at the same time seams to be correct.
View 1 Replies View RelatedAutoCAD Civil 3D :: Creating A Corridor
May 16, 2012I am trying desperately to create a corridor in C3D 2013.
I have the requisite Alignment, Profile and Assembly, yet when I create the corridor, either nothing appears, or it creates the corridor at incorrect elevations. I have the proper elevations in my alignment.
AutoCAD Civil 3D :: Move A Corridor
Mar 20, 2012I had a grading plan all set, with a corridor involved. Then, I received a new survey that I didn't know was coming. I need to move all of my elements to different coordinates. I can move everything except the corridor.
View 2 Replies View RelatedAutoCAD Civil 3D :: Get Rid Of Corridor Gaps
Jun 13, 2012How to get rid of this gap? Everything I have tried just causes overlaps.
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile From Corridor
Jan 11, 2013I only get 2 choices when selecting corridor feature line to create profile - ETW_base, and ETW_sub. My Subassembly has 2 pavement sections, a base and subbase section. I need the top of pavement profile.
View 2 Replies View RelatedAutoCAD Civil 3D :: Can Cut Corridor With (for Example) 45 Degrees
Nov 6, 2013I have a corridor with intersection.The intersection isn't 90 degrees. Can I cut corridor with(for example) 45 degrees?
View 9 Replies View RelatedAutoCAD Civil 3D :: Create Grade From A Corridor
Aug 27, 2013I want to create a grade (without object grade) using a corridor. This is my assembly:
This only contains the sub assembly "DaylightBench" in the side right.
I have the alignment and profile. I have created the corridor.
red line= alignment
green line= feature line (code Intersecction) converted to polyline.
pink surface= surface (code TOP).
I have added a boundary for surface of type "add from polygon" and I have selected the closed polyline(green line).
However, the boundary seems doesn´t work.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
AutoCAD Civil 3D :: Locks On River Corridor?
Aug 30, 2013I am trying yo model river corridor with 4 locks on it. On every locks different between levels is about 2-3m. I it is possible to create profile perependicular to bottom of river. How to create it?
Another question how to later connect surface. I mean Existing ground and corridor intersect. Ho to prepare later for render Existing ground with cutted corridor river? where I am below EG.
AutoCAD Civil 3D :: Corridor Volumes Into Sections?
Jun 7, 2012I have sevreal corridors with various spurs. The contractor wants the cut/fill volume in sections along the corridors, not one big cut/fill calc. Is there a way to do this in C3D? I have got the volume table with the chainages on, but he does not want a cumulitive figure for the whole corridor.
View 1 Replies View RelatedAutoCAD Civil 3D :: Corridor And Assembly Daylight
Nov 14, 2013I am creating a corridor with a simple assembly. On my assembly, I have basic lane and daylight Multiple surface. My target is existing ground.
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating Surface From Corridor
Jul 11, 2013I am trying to create a surface from a corridor. I have a sub-assembly attached, which I believe is working correctly. I managed to create the empty surface and when I try to add surface data nothing seems to happen. I keep changing the specified code to Base which is my finished gravel structure and hit the + but again nothing seems to happen.
Ultimately I am trying to determine a volume between my corridor and original topo.
AutoCAD Civil 3D :: Profile And Corridor Design
Jan 8, 2014I need to design a project but ı cant..ı have two profiles in use for one alignment..ı want to use left profile for left side, use right profile for right side.and ı want to draw cross section only one..how can ı design like this project..
View 8 Replies View RelatedAutoCAD Civil 3D :: Add Different Assembly Types Along Same Corridor
Oct 17, 2012I want to add different assemblies (some with walls or ditches) along the same corridor at given stations
Can that be done?
AutoCAD Civil 3D :: Label Corridor FG In Sections
Nov 22, 2011We have created sections from our corridor. We see FG and EG, we can use bands for EG from surface. How do we get the FG band to show the elevations for FG? The only option we have is the EG surface. We have tried to create a surface form the corridor in the corridor properties but that surface still doesn't show up in the surface list in the bands. I would have thought this info would be dynamic and come directly from the corridor would it not?
View 3 Replies View RelatedAutoCAD Civil 3D :: Why Corridor Adding A Hinge
Sep 18, 2013Why is my corridor adding a hinge? [Atleast I think that is the problem]
I am trying to create a berm that is 8' wide. For my assembly I used 4' wide basiclanes and daylightgeneral (with 3:1 slope in all parameters) on left and right side.
In the top image I have circled two of the areas in which the hinge line is shown. And in the bottom right the cross section of one side of the berm is shown. As you can see on the inside (left) there is two feet sloped at approximately -1% before it daylights to the surface at 3:1
Why isn't the left side matching the right?