AutoCAD Civil 3D :: Alignment Is Scaled 1/12 - How To Change It
Jan 18, 2013
here is my version:
AutoCAD Civil3D 2013.
Units are set to unitless.
An alignment was created from an existing 2D polyline.
The alignment stations, and the geometric properties, incidate that it is approximately 57 units in length.
If I use the DIST command from one end of the alignment to the other, it measures approximately 690 units, which is what I expected.
Obviously there is a 1/12 (feet-to-inches) thing going on here. I think I need to scale the alignment properties and/or station label properties by a factor of 12, but don't know where to find this tool.
Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created? For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y? It seems like this should be pretty easy, I must be missing something obvious.
I have Civil 3D 2013 and would like to define the station tick marks. Unfortuantely, the only style that appears on the Import pull down is "Standard". How do I go about downloading or loading from an appropriate program folder the "Tick" style set?
where to change the default beginning station from 0+00 to 1+00 in my civil 3d profile template (dwt), so that the beginning station is always 1+00, unless the user changes it.
I am setting up a template for my company and have noticed that I can't change the line/curve/spiral LTscale:
I have chosen a layer with the CENTER linetype for my line/curve/spiral in the style editor. The Alignment appears correctly with the CENTER linetype. However I want to make the dashes a bit bigger, so I change the LTscale in the style editor to 4, but then nothing changes.
When I change the same setting for the "line_extensions" element to the same layer, these WILL update when changing the LTscale.
All my LTSCALE, PSLTSCALE, MSLTSCALE are set to 1.
All other lines, such as polylines and featurelines, as well as the line extension lines of the alignment update correctly. Its just the alignment line.curve/spiral elements that do not.......
Are these locked somewhere?
Intel Xeon E31230 - 3.20 GHz 4.00 GB RAM Windows 7 Professional - 64-bit Nvidia Quadro 600 - 1GB DDR3
I want to change the reference surface for a pipe network with existing pipes and structures. however the changes will only affect new objects, I have to manually change the others one by one. Even with the vista open I can select multiple structures, but when I click in the reference surface column of one of the selected structures, all the others are deselected.
how do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
I using a data reference/shortcut to properly label an alignment in paperspace. However when I reference the alignment in and apply the labels the aren't the same as the original alignment that I am referencing. Is there a setting where I am supposed to apply a new beginning station.
Also it seems as though the stationing(distance) isn't even matching up 1:1 with the original drawing. For example in the original base drawing my alignment starts at 10+00 with the next PI at 14+76.98, but the stationing on the reference alignment starts at 0+83.33 with the very same PI being labeled as 1+23.08. So the very same distance is 476.98' in the real design and the drawing it's being referenced in, but the stationing of the referenced alignment shows it as 39.75 Units.
I've attached a screen of the beginning of the alignment.
Civil 3D 2012 Windows 7 Service Pack 1 Intel Core i7-2600 CPU 16GB RAM
I have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.
Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?
I’m wondering if there is a way to launch alignment grid view/alignment entities (attached) without the need to first launching “alignment”? This dialogue box is quite essential in editing the values of radius, degree of curvature and deflection angle for the selected curve.
Can I inherit the station from one alignment as the begin station for another alignment?
For example. Alignment 1 is 1000 ft long and starts at sta 0+00.
At sta 8+01, Alignment 2 begins and goes off in another direction.
I manually enter 8+01 for begin station Alignment 2. Life is good. Still in the design stage, and customer needs to modify Alignment 1 to avoid something. Now Alignment 2 intersects Alignment 1 at sta 8+15, but same N/E coordinates.
I manually enter 8+15 for begin station Alignment 2.
It would be better if Alignment 2 could inherit the begin station based on the new stationing from Alignment 1.
Using Civil 3D 2013Coordinates coming out of survey equipment are modified state plane GROUND (scaled up from the origin by the combined factor).Drawing is setup with state plane coordinate system with user defined transformation to establish geodetic reference and the ability to label lat/long or import Bing map data.Survey database is setup with "No Datum, No Projection" (data is already at ground, I don't want ot transformed).Import style is PNEZD and is set to use Northing/Easting not Grid Northing/Grid Easting.After importing points into survey database, coordinates of survey points match the CSV. This is good.After importing points from database to drawing, they are taken as grid coordinates, are scaled again and are off ~5,300 feet northeast.Why would Civil 3D assume the points in the database are grid and scale them when the import style used did not specify grid? Is there a setting or something I can do to tell Civil 3D to leave my coordinates alone?
I imported Google earth surface (at eye alt 600m) to civil 3d 2012 and created an alignment of length 181m.
When I exported same alignment to Google earth , it showed the length as 190m ( the difference increases with increase in length of alignment) And also the profile view of the alignment in the Civil D & Google earth varies.
I've created a dynamic block that simply flips a connector input from a connector output. Like This:
Attachment 26540
But if you put more than three numbers after the L- prefix, the alignment gets screwed up. Is there a way to change text alignment in a dynamic block? Or, conversely, what do the Align and Fit justifications do? Could I make those work for this purpose?
I have a project that comes and goes. It was actually started in Softdesk. Right now I'm working in Civil 3D 2012. I have an alignment that represents the left edge of pavement. Although I'm calling an offset alignment. It was created before they existed. So it's not linked to the centerline. There have been many changes to it over the past few years. Now it has a problem.
I wanted to edit in the Panorama. Right-click > Edit Alignment Geometry > select Alignment Grid View from the Alignment Layout Tools. When I went to the last segment in the Gird View, which was near where I wanted to edit, a segment about two thirds of the way along the Alignment was highlighted. Further investigation showed that although the whole Alignment would highlight when selected, all commands said the Alignment ended much sooner than the end station.
I've found that that alignment has been broken for quite a while but was intact at one time. My question is - What's the best way to repair/recreate it. I know I can explode it and create a replacement Alignment from the resulting entities. But is that the best way?
Civil 3D 2012 SP 2.1 Dell Precision T7400 Xeon CPU 3.16 GHz Nvidia Quadro FX 4600 12 GB RAM Win 7 Pro, 64-bit
This is strange. I wanted to label just the alignment name in a couple of places. I have an Alignment Name Label Style that does this. I now notice that it will capitalize some of the lower case P's in the curve label. Not the line label just the curve. They're applying the same style. It also changes back to lower case if I drag the label.
The style has one component and that is the Alignment Name and has Preserve Case set.
. How to assign proposed elevation to layout alignment along each station?. I know there is a way in LDT to assign proposed elevations to s specific range of stations or the full alignment, under menu "profiles/ FG Vertical Alignments/Create COGO Points" I am looking for the same one in C3D.
2. How to add connecting alignment label and station in profile view. For example I have an main alignment and in-between lot of other alignments are meeting with this alignment.
I want to show in profile view of the main alignment the meeting alignment's name and the station it meets with?
