Using ACAD 13 in Windows 8, when I use 3DCONFIG and check for updates I get the Performance Tuner Failed To Update error message. In the Knowledge Base there is a fix but it doesn't apply to ACAD 13 as the file names are different. Which file I need to change the permissions on in ACAD 13 and in what folder it may be hiding.
View 2 RepliesI just tried to update to 11.01. PS was open the first time, but was closed after the download started the second time. Only my email app-Eudora was open both times.
View 17 Replies View RelatedSince I upgraded to CC my PS6 update has repeatedly failed. Why?
View 2 Replies View RelatedWhy do I keep on getting this error every time I try to do an update:
Adobe CSXS InfrastructureCS6
Installation failed. Error Code: U44M1P7
Adobe Photoshop 14.1
Installation failed. Error Code: U44M1P7
Everytime I try to install a camera raw update it (I need it to be able to see my images in bridge, etc.) I get completely through the installation process only to receive an "installation failed" message. how to get around this?.
View 3 Replies View RelatedIn trying to download PS CC, Application Manager failed and would not update, after first claiming that another instance was running. I tried re-booting to no avail. (I am upgrading from CS6, running Windows 7).
View 6 Replies View RelatedThe latest Photoshop CC update failed, and Photoshop no longer worked.I uninstalled Photoshop (couldn't deactivate), but now I can't reinstall.
View 1 Replies View RelatedI have a mech/mfg-necessary pattern set on several parts, to the tune of about 90 slots and 500 holes each. Inventor is absolutely sucking it up handling these parts, and the assembly of these parts together is just a complete nightmare.
I have half-hour load times, constant crashes, and to top it off, they're iparts (used in an iassembly), which means I am constantly having to regenerate the whole part family with every change, a process that can take literally hours.
Are there substitute tricks, or display setting shenanigans I can pull? All of the features are individually needed somewhere, but no mgf machine needs all of them present at once.
My Photoshop CS4 quit reading CR2 files from my Canon EOS 5D Mark II. Photoshop update with new raw version failed.
View 9 Replies View RelatedI have scoured the forums and I see no discussion that addresses my particular error. For starters I have a Mac, not Windows.
Here's the error from the log:
- 0 fatal error(s), 2 error(s), 0 warning(s)
ERROR: The following payload errors were found during install:
ERROR: - Adobe Bridge CS5_4.0.5_AdobeBridge4-mul: Install failed
I'm following this Adobe guide on troubleshooting but have no clue how to address this. I have uninstalled and reinstalled Photoshop 3 times.I am also getting similar errors for pixelbender and Camera Raw:
Adobe Pixel Bender Toolkit 2.5 Update
Installation failed
Photoshop Camera Raw 6.6 Update
Installation failed
I tried to install the update with Adobe Updater and it failed with error code U44M1P7.I then downloaded the update patcht directly from the site and tried to install. Again error code this time U44M2P7.
View 3 Replies View RelatedDoes if VideoStudio X3 is compatible with my ATI TV Tuner 650 Pro capture card? It works fine within my Roxio Media Creator 10 program, but I want to use Pro X3 to capture. However, the program always returns the error: Either no video capture driver is installed in this system, or no device is connected.
View 2 Replies View RelatedWhenever I select some objects in an AUTOCAD drawing and Press Ctrl+C to copy them for taking it to any other file, it gives error "COPY TO CLIPBOARD FAILED."
However, this error is not for all the files but in some of the files. After much tweaking and researching on my own, I found out that this happens in files in which I have set viewports in LAYOUT. When i delete the entire LAYOUT by right Click + Delete, and then go to MODEL and do Ctrl+C, the copy to clipboard happens in normal way.
Why do I get the error when I have set viewports in LAYOUT ?
I'm working in one of my colleagues drawings and whenever the drawing is regenerated (for instance when panning or orbiting) I get the message "Failed to open record!".
View 4 Replies View Relatedi have a set of prints (4 seperate files) and when i try to eport them to pdf, i get a error stating:
Job: - Error(s) Did Not Plot
Job ID: 1
Sheet set name:
Date and time started: 9/25/2013 7:05:02 AM
Date and time completed: 9/25/2013 7:05:03 AM
UserID: X.X
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: B-0193-1-Model - Error(s) Did Not Plot
File: Z:EngineeringPRINTSBPRINTSB-0193-1.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
The file was originally created with Autocad 2010 in 2011. i would post the file but it is a customer print and i cannot disclose it here. we are now running up-to-date autocad 2013. this is not a problem with other files i have had to work with (older and newer). just seemds to be a localized event and am wondering if it is that something is corrupt.
when I try to use the VIEWBASE command to create views from my 3D solids, I always get the message "inventor server failed to load" and the command stops. I am using AutoCAD 2014 with SP1 installed on windows 8 .
In a similar message in the 2010/2011/2012 discussion group: URL....
it is suggested to reinstall the software, but this is not working for me.I have already tried to 'repair', 'reinstall' and completely remove all the software and then reinstalling it, but nothing seems to fix this problem.
Are there any other programs I need to have installed to get this command to work?
Starting a new Mold Design. When I try to place my part, I get an error message that says... "Errors occurred during create. Plastic part: Create Failed."
How do I determine what the problem is with my part I'm trying to bring in? This was a part that was brought in from a .step file, then saved it as a .ipt. No problems that I can see with the .ipt, but Inventor Mold does not like it for some reason.
I have this assembly. I want to sort the browser, so I go to Assembly Tab, Productivity panel, Alpha Sort Component. a few seconds later, I get "Sort Failed". I am not in a weldment, not in locked view rep.
View 9 Replies View RelatedI have one of the Promise R6 drive arrays that has failed on me but fortunately it hung in there long enough for me to back up all my data. My questions is once my new array shows up can I copy all the data onto the new drive with all the same folder hierarchy and will it all work fine with smoke again as if nothing changed?
View 3 Replies View RelatedI have a block in a drawing that will not update after re-insertion of the updated copy of said block (Wait, does that make sense?)
Scenario: Floor plan with the room as a block. I go to the actual block drawing and edit it. I then try to re-insert it into the existing drawing, but the drawing still uses the same block that was originally inserted.
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedI downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View RelatedI have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
I am having problems with the automatic field updates. I've made a dynamic block with a length parameter "LENGTE (mm)" and a stretch action. In this block I also made a Attribute "LENGTE" the value of this attribute is linked to the length of the parameter with a field. The system variable "FIELDEVAL" is 31, so when I save or plot, or ..., the value of the attribute will be updated to the exact length of the parameter.
Now when I insert the block and stretch the parameter to a desired length and I save the drawing the attribute is updated and it has the same value as the parameter. But when I close the drawing and I open it again AutoCAD changes this value to ###. I tried the command "UPDATEFIELD" but the value doesn't come back. I have made a command string "c^c^_fieldeval;0;0;save;close" so that when i close the drawing AutoCAD sets the system variable FIELDEVAL to 0 then saves it and closes the drawing, so when I open the drawing again AutoCAD doesn't update the fields. That solved the problem. When I open the drawing again, I made a command to put the fieldeval back to the default value "31", so when I change the length parameter the attribute "LENGTE" will be updated again after a save or a plot. But then it goes wrong and AutoCAD changes the value back in ###. What is the reason that AutoCAD can't update that field, it works fine when the drawing stays open but when the drawing has been closed and I open it again it doesn't work anymore?
I am using several blocks within a drawing (furniture...stock racking, to be precise). I had additional information to add as a new attribute. Opened the block in Block Editor, added the new attribute and saved changes. No change to any of the instances of that block in the drawing? But when I add the same block to the drawing, all new instances have the new information.....which means the block exists, with exactly the same name, in the same drawing in two different forms??? How is this possible and why do the old instances of the block not update to match the current version.
Even more confusing is that if I open an 'old' version of the block in Block Editor....it appears with the new attribute in place and when I close it (saving changes).....it no longer shows that attribute!
Can find no mention of a switch or default that might be causing this.
I'm updating drivers for Computers with Nividia Quadro 4000 video cards. I went to the Nvidia website and found two drivers. one I found that was certified for AUTOCAD 2013 and the version is 310.50. And another driver for the video card version is 311.50. should i download the newest version or the ACAD Certified version? Could the "Certified" version download not be current? Are there any drawbacks from one to the other?
View 4 Replies View RelatedI double click to update my parts list, when I select apply or ok, the updates do not happen.
I have to close Inventor and re-open to see the changes.
Windows 7 64-bit
Autodesk Design Suite Premium 2013
is there a setting to have this option always checked?
View 1 Replies View RelatedHow to update the “title block” being inserted as Xref?
I wanted to update the title block (inserted as Xref) as some changes occur in the original dwg but sounds not to work.
How the Xref is updated so that all changes in its original source can be reflected automatically?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to change the saved version when running a titleblock update?
Even though my save preference is set 2010, anything saved during a titleblock update is in 2013.
Noticed this in 2013 & 2014
When some off our users move the dimensions in paperspace or the drawing in modelspace,
only some off the dimensions would see the viewports scale factor, and multiply itself by that, from my knowledge this happens when you uses the power dimensioning in Mechanical, and the the annotative tick box is selected, but for some reason one particular user he uses normal annotations when dimensioning, where there is no annotative functionally but the dimension still behave as mentioned.
Product design suite standard 2013