So we have now been told by the state that all of our right of way maps must be done (finished) in microstation. We have solely been autocad users for the last 15 years. We purchase microstation, and I immediately hate it! So, the owner wants to know if we can convert back and forth. I did some quick converting but seems the textstyles are the major problems.
View 1 RepliesI have a client that required us to give them a surface that they could load into microstation. I have version c3d2010. I gave them a land xml file. When they uploaded it into their program, which I believe is inroads they said the contours it generation for the surface looks great in the middle, but the edges it seems to have dropped the elevations to zero.
I did make a boundary to go around the surface to clean up any errant triangulation lines. The polyline I used is at elevation zero. I don't know if this is causing that? The client thinks the inroads is forcing the edges to be elev zero. She has limited knowledge of land xml files and has never used them till now.
Something to change on her end or is it my polyline causing this?
I am working on my company template. We are trying to keep it as close to INDOT standards as we can. Indot uses microstation and provides many files for microstation users. I converted one of the files to a .DWG and impoted all the linetypes to my template. This had a lot of bad side effects.
How to extract the actual code for the Linetypes, so that i can simply re-write a code as autocad wants it and then import?
I attached DGN file in dwg, the same way of attaching any exrefrence. I would like to make changing the this attached file. It does not respond as block or xref.
How can I edit this DGN in the AutoCAD?
In my company, we are thinking about purchasing either Autocad or Autocad LT
Our customers are using Autocad to create DXF or DWG and we need to convert into GDS.
We are currently using LinkCad but the conversion success is limited.
If Autocad or AutoCad LT comes with a feature to convert DXF/ DWG into GDSII format ?
Any conversion program that is bi-directional between object (,obj) files and AutoCAD drawing files (.dwg)?
View 2 Replies View RelatedI received a 2013 dwg file and want to convert it to 2011. I am currently running C3D 2011. I used the DWG TrueView program and was able to convert the 2013 file to 2011, but none of the alignments, profiles or corridors converted over. How to convert a 2013 file to 2011 and get the alignments, profiles, corridors, etc., to convert over as well?
View 3 Replies View RelatedI need to convert a large number of drawings from Imperial to Metric (I have copied that drawings and intend to save as a metric set, so I'll be overwriting (and possible appending "-METRIC" to the file name.) So I wrote a batch file to collect the drawings then apply a conversion (autocad) script.
I also created a script to close the drawings that would run after a batch (i.e. subdirectory (say 20 drwgs)).
If I open the drawings manually and run the scripts, they work fine, however I have been unable to automate the procedure.
Batch to collect files:
SET ACAD2013PATH="C:Program FilesAutodeskAutoCAD 2013"
FOR /R c:ACADCrosby-Converted_to_Metric est %%f in (*.dwg) do start /wait %ACAD2013PATH%acad.exe%%f /b c:ACADscale-imperial-to-metric.scr
start /wait %ACAD2013PATH%acad.exe c:ACADCloseACAD.scr
[code]...
I need to export many library elements (conveyors) which are saved in individual blocks to mass objects. I need to convert them to IGES after that.
Until now I have to open every single block and convert all of it to a mass element. This simply takes too long.
Is it possible to write a small script or program which converts all blocks or the selected blocks to mass elements?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedI am a landscape architect, and have used autocad for the past three years, and I am also familiar with microstation, which I used at a previous job. My question is primarily for the users that are familiar with both products.
Unlike much of the drafting I have done in architecture (which is often straight lines and 90 angles), landscape architecture and land planning often requires long sweeping curves that lead into tangent arcs, and or lines. Microstation has a brilliant arc tool that allows one to create beautiful curves that are always tangent. The arc tool also allows placement of the next curve anywhere, as opposed to snapping to an end point. Is there a way to do the described actions in Autocad?
Is there a way to convert a .dgn to a .dwg without microstation?
-I have read that you can xref a dgn in a dwg but this did not work. civil3D simply does not recognize the dgn extension in any way shape or form ....that i have found.
THE LONG VERSION AS TO WHY:
I have both a dgn and a dwg of the same thing, only difference being the dgn has colored layer linework and lineweights etc. for entites on the same layer. The .dwg is just thousands of white lines on various layers.
to make it easier id like ot be able to have the colors to at least quick select stuff to move to their own layers seperately. rather then have multiple entites on the same layer that are in no way related to each other.
Creating a CTB file to mimic a Microstation pen table? I have a client supplied *.tbl (an intergraph pen table file I believe) and how to generate a CTB that will behave similarly (ie. plot nearly the same)..
I can open the *.tbl file in a text editor and it just looks like a bunch of "if, then" statements related to line weights and pattern files....
I have already created a template with the same layers/levels, colors, linewights, etc... (and can convert everything to dgns), but now I need to figure out how to get similar plotted results from both sets of drawings (the dwg and the dgn..)
I am not a CAduser, but someone who is managing a CAD project whereby we need to covert the files to Microstation. My AutoCAD person has limited experiece doing this so I thought I would turn to you for your expertise.
I've read that you can convert AutoCAD files to .dxf and import into Microstation but will that keep the integrity of the file? As you cannot covert directly from one to the other because fonts, line weights, etc. don't translate well.
I'm trying to automate importing Microstation files into AutoCad (and then doing interesting things with them). I'm stuck on the import, as it keeps throwing an "Invalid Argument Exception".
I've thrown empty strings, "hello world" strings, ensured that the string points to a valid file, ensured that the string points to a valid Microstation file... for the scale factor, I've thrown constants, symbolic constants, variable doubles... and where I think the error lies, the insertion point, I've thrown Points, Point 2d's, Point 3d's, arrays of integers, arrays of doubles, and Acad Points, and all of the above even cast as objects.
Supposedly, the signature for import is:
object IAcadDocument.Import(string FileName, object Insertion Point, double ScaleFactor)
but the <object Insertion Point> is throwing me... what kind of object is wanted? The following is a complete working program; you'll just have to add the two autocad references.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
[code]....
(Obviously the intent is not to use hard coded file names, these are for debug purposes. I'm also running as a Windows project rather than a Console project, but the exception is the same.)
Is there a tool in Microstation that converts .dgn to .dwg without any loss of styles, lineweights, etc?
View 9 Replies View RelatedI'm in the process of assisting a client implement Civil 3D into their work environment. Up to this point they have been MicroStation users. They have now seen the power of Civil 3D and are making the move. However, they're not yet Civil 3D experts and they still have some projects in MicroStation that need to be completed.
So in a project in MicroStation they are trying to place a pattern (similar to a hatch pattern in ACAD) into an area but the software has stopped looking for the MicroStation cell file (I believe that's what it's called) and has now started looking for the AutoCAD acad.pat file. This has only started happening on any computer that has Civil 3D installed.
Where that search path is located within MicroStation so I can reset it? Until this is resolved they've halted further installs of Civil 3D.
I'm mainly work in 3D software (C4D, 3Ds Max). I have a client that wants to do high end traffic renderings. They have supplied me with the Infrastructure Design Suite 2014.
I received an old Microstation file from them, which I have then brought in to Civil 3D. I would like to add surfaces to this file so then I can export to 3Ds Max, and use Civil View to incorporate the design, and then traffic simulation data from VISSIM.
I have researched the entire work flow, the only thing holding me up is adding the surfaces to this Microstation file. It seems this is maybe not very common as I am having a hard time finding any tutorials or documentation on the internet.
I'm trying to OPEN some legacy MicroStation drawings through AutoCAD. I have done this with nearly 400 files thus far but there are a dozen or so that are coming back with an error message reading 'YOU HAVE A SELECTED AN INVALID OR UNSUPPORTED DGN FILE'. I can look at these through Bentley Viewer, but do not have a full version of MicroStation to try and fix things.
How to fix things via AutoCAD?
Everytime I try to open files created from Microstaion but saved as CAD it blue screens my computer! I have a newer laptop with Windows 7. However, an older computer in our office with Windows XP can open these files with no problem? Both computers have AutoCAD LT 2012.
View 1 Replies View RelatedWhen I copy or move an object in a file converted from Microstation to Autocad 2012 the system freezes or slows down to a crawl. If I redraw the drawing in Autocad it works fine. I have a lot of drawings converted from Microstation and I don't need to be redrawing them all.
View 1 Replies View RelatedI have a previously converted Microstation drawing in Autocad 2011. In the conversion all blocks were given unique names. I would like to edit similar blocks globally. Many of the Microstation blocks look like the standard blocks I use. Does a Lisp routine exist that can select similar Microstation blocks and give them a single name?
View 3 Replies View RelatedWe are a water utility and have thousands of detail drawings of service taps and hydrant connections (maybe 11,000 total). These are in the old Microstation J format. Each drawing is divided into a top half and bottom half. The bottom half of the drawing is the actual drawing portion.
The top half of the drawing is text that comes out of an Old Oracle database, into Microsoft Word 2000 through mail merge then is copied and pasted into the top portion of the card. Newer drawings done like this and opened in AutoCAD have the top portion identified as an OLE object (embedded object), while the older drawings just look like a drawing in the top.
I'm looking to update the system to ArcGIS and AutoCAD. The data will be moved to a Microsoft Access database (probably later SQL Server), and I want to convert all the old Microstation drawings into an AutoCAD format. ArcGIS will provide the basemap and be linked to the database, with clickable hyperlinks to open the AutoCAD drawings. I would like to be able to keep the bottom drawing half while changing the top half of each drawing to reflect updated data in the database. If this can be automatically updated, that would be awesome.
One is the best program to automatically bulk convert the drawings from Microstation J to AutoCAD (I have 2011). Also, I'm looking for a method to display the text from the database in the top portion of the card using either mail merge with AutoCAD or some automatic method of pulling the info out of the database. Can I just copy-paste this info into AutoCAD as we did with Microstation or is there a better way?
A co-worker had a copy of a handy little guide called "Lynn Allen's Tips and Tricks for AutoCAD 2012". I think she (or another co-worker) got it at AU.
On page 33 under the heading "DGN Support", it says the following:
Complex linetypes are now maintained! To ensure that custom linetypes are displayed, copy the corresponding .rsc files to the support path...........
The way I read that, Acad will read the RSC file and display linetypes from it. Is that true? Does it only work when I'm looking at a DGN file? Or can I use the RSC file with my dwg file? I'd test it myself but I don't have access to any MicroStation files.
If Acad can read the RSC file directly, then I don't see why the linetypes can't be used in a dwg file. AND that being the case, I also don't see why an Autodesk product can't be created to WRITE these RSC files. As far as I'm concerned MicroStation's custom linestyles is so much more advanced than Acad's linetypes.
I have a need to convert about 14000 .dwg files to jpg, gif or bitmap for display on the web. Are there any good automated ways of doing this. We have a database that contains the drawing names and directory locations I wish to use this for converting all of the drawings.
View 7 Replies View RelatedI usually come across this situation where i have to convert PDF to DWG. now i do it with underlay and trace it approx. Is there any converter for this purpose?
I want a software to convert PDF to DWG/DXF with relative amount of accuracy.
I am in the process of coverting over to the STB plot style format and I have a problem which I cannot understand.
While in the drawing I want to convert I started with CONVERTCTB, the dilague box appears and I selected my current CTB plotstyle (the one I use to do my regular plots with) and upon accepting it another dialogue box appears asking me to name the new STB plotstyle. I did so and a message came up informing me the conversion was successful.
I then typed CONVERTPSTYLES and a message comes up followed by the dialogue box where I am to select an STB file. Here I selected the file I created in the CTB conversion in the previous step.
The conversion seemed to work correctly but when I go into the layer properties manager the plotstyles all have the same named style ie style 1, when I select one of these plotstyles to change it all except 3 styles are noted as missing.
I read that when I complete the conversion I should have plotstyles with old_pen_01 etc.
I have attached a snap shot of the resulting layer manager. The active plotstyle is the one that was converted during the CTB process ie the first step above.
Convert file igs to dwg. Only using inventor or some other apps. bcoz igesimport giving too many extra lines to work with them. There are 3 files and they are more than 1.5mb.
so i upload them in mediafire. below is the link
File 1
[URL]....
File 2
[URL]....
File 3
[URL]....
Please download and convert them.
Need recommendation for a pdf to dwg conversion software or cloud based service? I have alot of floor plans in pdf format that I would like to convert to dwg. I'd hate to have to draw them again.
View 5 Replies View RelatedWhen i convert the pdf to dwg then all of the text got converted into the line. Any better way of conversion or else any command /lisp through which those lines again get converted into text?
View 8 Replies View RelatedI am working on an old (OLD) version of Auto CAD (no integrated converter). What is the best way outside of Auto CAD to Convert a PDF file to a DWG?
View 9 Replies View Related