I have started to creates some sketch blocks.The only issue i have is when i go and place them in a drawing they get placed way outside the layout so i have to drag them into the layout sheet.How do i get the sketch block to be placed into the layout..
View 6 RepliesI created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies View Relatedwant to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedIs it possible to create a text block attribute in part sketch mode?
View 2 Replies View RelatedHow Can I know the name of Block parent Layout?
View 1 Replies View RelatedI have a drawing template that I frequently use and am trying to get the title block appear in every layout. Is this possible? It is only displayed on my first layout.
View 4 Replies View RelatedIn AutoCAD it is possible to set the orientating of a block to the orientating of the layout.
This can be done to run the " block" command, select the block to change, and and activate " Annotative" and " Match block orientating to layout"
For example, you may want to have a block presenting the locating of an elevator automatically orientated to every layout.
In a layout with a rotated viewport by 90 degrees, all the elevator blocks are shown according the layout. Is it possible to set the block orientating to match the layout in .NET ?
Is it possible to set the block orientating to match the layout even the block is not annotative?
I have to insert a block in a paerspace layout if it is not already present in that layout. I tried the following function to identify the presence of the block.
But it returns true even if the block is not present in the particular layout but is present in another layout.
private bool checkBlockPresence()
{
try
{
Autodesk.AutoCAD.EditorInput.Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
[code]........
Also I am using the following function to make the particular layout active before calling the above function.
public void SwitchTo(string Layout)
{
Autodesk.AutoCAD.ApplicationServices.Document acDoc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Autodesk.AutoCAD.DatabaseServices.Database acCurDb = acDoc.Database;
using (Autodesk.AutoCAD.ApplicationServices.DocumentLock doclock = acDoc.LockDocument())
[code].......
So my code is similar to
SwithTo("A3")
if(checkBlockPresence() == false) // this always returns true.
{
---------
}
I'm working on a program that cycles through each paperspace layout in a drawing and updates the sheet number and total quantity of sheets in the titleblock attributes. I've updated the block attributes in paperspace before, and it worked fine. Now that I'm trying to cycle through each layout, I cannot get it to work. I have attached my code. I beleive it starts to cycle through the layouts, but it fails when I try to grab the attribute collection.
Public Sub UpdateSheetNumbers() Dim doc As Document = Application.DocumentManager.MdiActiveDocument Dim db As Database = doc.Database Dim ed As Editor = doc.Editor Dim layoutCount As Integer =
[Code].....
The most efficient way of inserting a title block (the border around a drawing with text etc) into a layout? Sometimes when I insert a title block it seems like the title block is too big or too small for the layout .
View 9 Replies View RelatedI had inserted a block on my model page. I then wanted to insert it on my layout page where I wanted to have a legend. The block never showed up on the layout page and now it is not on my model page. When I attempt to insert it anywhere else now, the block does not show up in the preview window of the insert popup, nor on the drawing.
View 9 Replies View RelatedI've got a problem with creating Path in Inventor VBA. I've created a source block definition in SourcePart.ipt, derived it in DestPart.ipt, placed this derived SketchBlockDefinition in Sketch3 and draw 3 extra lines. Now i want to add a SplitFeature with SplitTool as a Path of 3 lines, but first i need to create this Path. There is no problem with creating path from this 3 extra lines, but when i want to create path from lines that belongs to derived block - an error occurs.
Below is sample code (also included in attached file - DestPart.ipt). Try run it with DestPart.ipt as an active file. When Inventor is prompting for Selecting Sketch Entity first select one of 3 extra lines, macro ends with no errors. Then run it again, this time select one of 3 lines that belongs to SketchBlock - an error occurs.
When you try to add SplitFeature (Trim Solid) by UserInterface Button "Split" there is no problem with any set of 3 lines.
Sub CreatePathTest() Dim oPartDoc As Inventor.PartDocument Set oPartDoc = ThisApplication.ActiveDocument Dim oPickedSketchEntity As Inventor.SketchEntity Set oPickedSketchEntity = ThisApplication.CommandManager.Pick(kSketchCurveFilter, "Select Sketch Entity") Dim oNewPath As Inventor.Path Set oNewPath = oPartDoc.ComponentDefinition.Features.CreatePath(oPickedSketchEntity)End Sub
My System is Windows 7 32bit/64bit, Inventor 2012
I am using inv2011. I have to create rec. blocks very often and in inv2011 . I have to constraint it in middle.
Can i write a Macto that gives me constraint rec block in sketch. This feature already available in Inv12.
We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
I am in the process of fixing one of our dynamic blocks. It's a fairly simple fix where there was a typo in one of the names of our items in the lookup that needed to be fixed.
I changed the name of the item in the lookup table. I went and did the test block and it seemed to work fine, but when I bring the block into a drawing, it reverts back to the old lookup as if I did nothing at all.
I made sure that the path was correct and I even just dragged and dropped straight from Windows Explorer to no avail.Does AutoCAD keep referring to the old block? Did I forget to change something else?
my problem is whenever i make a new block a stretch point appears even if its not a dynamic block . also its not a stretch point, because when i click on it, it just move the block , and it always appear on the coordinates 0,0 it cause me a problem when I insert the block , autocad use this point as a base point , and its very far from the real block .
View 1 Replies View RelatedI have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
I am setting the Custom Properties on a CAD File. The Properties may include "Drawing Number, DrawingName, ProjectName"...
Now using code I want to fetch values of these Properties and set into Layout Title Block.
I created a Title Block in Model Space with a Scale of 1:100. When I copy it with Base point and paste it in Layout Paper space it do not fit with the default paper space. What will I do?
View 3 Replies View RelatedIs there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies View RelatedI am working on a set of drawings that include attributes that are numerically sheet specific (page numbers and the like)
I saw a previous post that allows tabs to display block info, but is there a way to get blocks to refer to tab info?
Essentially, I am trying to label match lines from page to page. Being able to have these labels refer to the numeric value of the layout tab, tab previous, and/or tab after would be extremely useful and time saving.
I have previously drawn my title block in Model space but i now know the correct way is to draw it in the layout.
Is there anyway of transporting the title block template into the layout and then saving that as a template for my future drawings?
Or do I need to go back to the beginning and draw the title block again from scratch in the layout and then save that drawing as a template for future use?
I've managed to cobble this code together to turn some sketch visibilities on and off. However, what I'd really like to do is have a single sketch containing some blocks, and turn the visibility of the blocks on and off... How to call the blocks -
'Iterate through the sketches collection'Turn the edging indicators On And Off
For Each oSketch In oDoc.ComponentDefinition.Sketches Select Case
oSketch.NameCase "Front Edged"If E01 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Top Edged"If E02 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Back Edged"If E03 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Base Edged"If E04 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfEnd SelectNext
I have a surface model of a bin that I am going to use as a master for deriving sheet metal parts for each side of the bin. After creating Sketch 9, which defines the mating flanges of the sheets, I repeatedly get the error noted in the subject when I try creating a derived part from this file.
I narrowed the problem down to the sketch block I used to define the square holes or more specifically a dimension that appears in this sketch block. I originally drew the circle with the square around it within Sketch 9 and then used the Create Block command. Then I patterned the block along the edges and made the pattern symmetric about the mid point of the edge and placed the hole half way out on the flange. (Flange width is set as a user parameter "FlangeWidth"(1.5") and distance to hole is "FlangeWidth/2" or even just a raw value of 0.75").
Now once this dimension is added to the sketch it will also appear in the block editor for the 5-16 Carriage Square block. If this is deleted from the sketch and the block definition and the pattern of holes are left unconstrained in this one direction a derived part can be successfully made. BUT if a dimension is added to the sketch it will trickle down to the block definition and now a derived part will fail...
I realized that my holes are to be on the midline of the flange so I can constrain them there without a dimension and so I can work around this. I just didn't think dimensions to geometry not included in a block were added to the block definition.
Inventor 2013 x64 sp1.1
Workstation Specs:
Dell T7500 Dual Xeon E5620 @2.40Ghz 8GB Ram
NVIDIA Quadro FX580 4GB, Windows 7 x64 sp1
I have a need to send files saved from Inventor.dwg to AutoCAD.dwg to suppliers, however due to the quantity of files "size", I need to purge them in Autocad before I e-mail. The problem I have is that my template Inventor.dwg is 1 mg due to Sketch Symbols, plus added file size for the views etc. When I get to Autocad to purge them, my Sketch Symbols and Title Block is on the "0" Layer. I have to select everything that is on the "0" Layer and change the layer to a different layer to start a LISP routine that does a, Erase All, Purge All, to get my file size down. I have not found a way to change the layer that Sketch Symbols are created on or reside on by default or Title Block either.
Any way to do this Inside the Sketch Symbols, inside the Title Block, using the styles, anything?
I am just now going through a iLogic course and read that Layers can be hidden. Can iLogic be used to change the layer of "SketchSymbols" or "TitleBlocks" and or used to purge all Sketch Symbols during the SaveAs to Autocad.dwg process?
In the title block of a my layout template I have tables inserted for revisions, drawing type, numbering etc. I have type already inserted in those blocks that I typically click on and then type in what I need it to say. My template works on all my other drawings except a particular one that I am currently working on.
When I click on the type, it automatically increases from 3/16" to 8" and enlarges the box to accommodate the new font size.
I've attached a screen. The top is before I click on the word "type" in the lower right corner and the bottom one is afterward.
I need to open a drawing and read block attributes in each layout.
Dim AcadApp As AcadApplication
Dim AcadDoc As AcadDocument
Try
AcadApp = GetObject(, "AutoCAD.Application")
Catch ex As Exception
[Code] ....
how to read each layout block attributes?
Many times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies View RelatedIs it even possible to get the entity name of the last block added to a layout? I need to find the entity name of the last block added to each of three layouts.
Previously I was using entlast but obviously that will not descriminate per layout.
Right now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies View RelatedI would like to insert a block in a specific layout (eg. "LAYOUT13") using the function vla-insertblock
I have already searched the web and this newsgroup but have not found the solution.