AutoCAD 2013 :: Hide Specific Layout Tab

Nov 25, 2013

Layout tab, is there a command to hide the specific layout not the layout & model?

when i right click in the model or layout tab then click "Hide Layout and Model Tabs" , all is being hide.

i need only specific layout to be hidden.

View 8 Replies


ADVERTISEMENT

AutoCAD 2013 :: How To Hide Xref In One Specific Viewport In All Layouts

Jul 4, 2013

We have some heavy drawings with many layouts. Each layout contains multiple viewports. It takes up to 10-15 minutes to switch layout. When we insert a new xref we would like it to appear in all viewports except one. This applies to all layouts.

View 6 Replies View Related

AutoCad :: Keystroke To Hide Show Specific Layer?

Sep 9, 2012

runing autocad 2010, i want to create a keystroke to hide /show a specific layer, how can i do it?

View 5 Replies View Related

AutoCAD Civil 3D :: Specific Paperspace Layout In Windows Shortcut

Nov 27, 2013

A way to create a windows shortcut to a drawing that opens a specific Paperspace Layout?

For example, I have a drawing located in a Windows folder called 'Appraisal Maps', the drawing contains 2 paperspace layouts, one of which is named Show Me Stakes. I would like to have a Windows shortcut of the drawing inside of a Windows folder called 'Staking-Show Me', so that when I double click the drawing it will open up and automatically switch to the proper paperspace layout.

I am wanting this for two reason, 1) so that we do not create multiple drawings and actually use the power of autocad layout tabs and layer management. 2) so that when management opens up the drawing it goes directly to the proper layout minimizing their head scratching as to what is going on.

View 6 Replies View Related

AutoCad :: Snap Specific GPS Coordinates On Layout (northing And Easting)

Oct 23, 2012

I am having a little trouble with gps coordinates. I am trying to snap to a specific gps coordinate on my layout. I have a "gps block" that spits out the proper coordinates but i am not sure how to move to a specif point. My layout is set up such that when i use my "gps block" on a known point it spits out the northing and easting, however, when i try to actually type in a specif northing and easting, it is no where near the point i am looking for on the layout.

View 6 Replies View Related

AutoCAD VB :: Delete Blocks With Specific Names In Multi Layout Drawing

Apr 25, 2011

In autocad 2011 ... I am looking for some sample code to delete all blocks with specific names in a multi layout drawing.  There may be multiple blocks with the same name. 

This is what I have so far ... this code collects the objects and loops through the layouts and the blocks ... if it finds the text "REVBLK" in the block name ... I want it to delete the block ... it does delete some of them but not all of the blocks ...

Dim E1 As Object
Dim ATS As Variant
Dim EA As AcadAttributeReference
Dim objLayouts As AcadLayouts
Dim LayerNextNo As Integer
Set objLayouts = ThisDrawing.Layouts
LayerNextNo = ThisDrawing.ActiveLayout.TabOrder

[code]....

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Insert Block In A Specific Layout Using Function

Jan 28, 2012

I would like to insert a block in a specific layout (eg. "LAYOUT13") using the function vla-insertblock

I have already searched the web and this newsgroup but have not found the solution.

View 3 Replies View Related

Paint Shop Pro :: Opening To Specific Layout

Feb 22, 2013

Right now my program opens to the "manage" screen. I changed it way back when, due to freezing issues. It's freezing more and more now and just recently started showing a HUGE preview screen on the right. Not sure what I did to cause this but I'd like to change it back to opening to the Edit screen.

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change A Specific Attribute From Specific Block To Specific Value

Dec 7, 2011

I've had a simple lisp I've been using for years that suddenly disappeared.  It required that you identify a block name, tag name, and the value that you want the tag to be.  All of this is performed via command line, so it is scriptable.  Since I lost it, I've been experimenting with -attedit.  This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.

1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?

View 9 Replies View Related

AutoCAD 2013 :: Any Way To Hide Scroll Bar?

Jan 16, 2013

The vertical scroll bar don't really bother me, it's the bottom scroll bar that I mostly want to hide. I never use them and the horizontal one take too much space that hide some "tabs". I know I can "minimize" the horizontal one, but I have to do it every single time I start AutoCAD. So I've search a way to hide them but come with nothing.

View 5 Replies View Related

AutoCAD 2013 :: Hide Vertices On Lines

Jun 12, 2013

Why does my new lines all show their vertices, even if they arent selected? I dont want the vertices to show when the lines isnt selected.

View 3 Replies View Related

AutoCAD 2013 :: How To Hide Dimensions On Drawings

Oct 11, 2012

How can i hide the dimensions on the drawing in autocad 2013....screen is cluttered so hiding the dimensions will keep the screen cleaner.

View 2 Replies View Related

AutoCAD 2013 :: Hide Part Of Extrusion

Mar 1, 2013

I would like to create an effect similar to punching/stamping something in wet sand. Picture this... you have a punch/stamp and it says "Hello". You punch it into the wet sand at the beach and it keeps the form of the punch/stamp. You can see the interior angles/shapes, but not the exterior as it is part of the rest of the beach I want to be able to create that effect in a graphic/drawing.

If you want to look at it another way:

Say you have a glass. You also have a hole in the table to hold the glass. Once in the hole, you see only the very top of it and the inside of the glass... but that which is below the table is not seen. If looked at from above, you can see the interior that is below the table, but not the exterior.

View 5 Replies View Related

AutoCAD 2013 :: Hide SN Without Deployment On SLM Installation

Jan 15, 2013

I have some stand alone AutoCAD installations, and I want to know if is posible to hide the SN. I know that when I create a deployment I can select the silent mode to hide this, but I have many SN and i dont want to uninstall the software.

View 1 Replies View Related

AutoCAD 2013 :: How To Hide Hatch Grips

Apr 12, 2013

How to hide hatch grips,how the grips of hatch can be hidden.

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 9 Replies View Related

AutoCAD 2013 :: Hide Situation - Missing Geometry

Jun 6, 2012

I'm having a recurring issue with using hide situation.  Steps are detailed below and an example file is attached. 

Windows 7 Professional 64-Bit SP1

Sketched all the geometry.Used hide situation to hide the portion of the fittings that reside within the clamps.Copied the clamps and fitting ends to each end of an elbow.Had an issue with item selection and used the audit command on the drawing.  Following this the audit says there is a problem with the program and I should restart.

Restarted the program and any line that was effected by the hide situation is now missing.Attempted to open the backup file and the hide situation lines are also missing.

This has happened multiple times with different drawings, but the effect is always the same, all the hide situation data is now missing and I've lost a significant amount of work.  The AM_3 layer created by hide situation is still there, but has no geometry. 

View 4 Replies View Related

AutoCAD 2013 :: Hide Hidden Lines By Block

Mar 2, 2013

I"m using AutoCAD Electrical 2013 but this is more of a general CAD question.

I'm working with floor plans from another company, the drawing contains xref for the floor plans and other blocks. I need to label some of our equipment. I'm simply using a DTEXT label inside a rectangle as a block with the text as an atribute.

I'd like to place the label on the floor plan and have it hide anything underneath. I do this with 3D blocks for other work, but I'm looking for a quick and dirty solution.

View 3 Replies View Related

AutoCAD 2013 :: Hide Command - Cannot Select Anything Until Regeneration Done

Dec 18, 2012

We just started using autocad 2013 after many years on autocad 2005.  I am working on a 3d model, and whenever I do a "HIDE" command, everything looks OK, but I can't select anything until I do a regen.  This was never a problem in 2005. Some of the drawings I work on are quite intense and using the hide command would definitely work with selecting the proper objects.  Why can't I select or find endpoints or centers any more after doing a hide?  

View 1 Replies View Related

AutoCAD 2013 :: Hide Certain Objects In A Layer In A Vport

Aug 22, 2012

I am wanting to hide certain objects on a layer in a layout so they dont show up when i print it out.  Is there a way to do this?  But I still want the objects to show up in other layouts all the time.

View 4 Replies View Related

AutoCAD 2013 :: Hide Elements Of Same Layer For Printing

Feb 28, 2013

I'm trying to print a certain window of my drawing, but I'm not wanting to print every element contained within that window. How do I hide these elements when they're on the same layer as other elements that I want to print?

View 7 Replies View Related

AutoCAD 2013 :: View Port Frame Won't Hide

May 15, 2012

I have a drawing with multiple view ports and multiple raster images

I can shut the image frames off with "Imageframe" )(tframes) this works fine But it does not turn off the viewport frames.

I've tried putting the viewport on it's own layer and freezing the layer. This looks OK on the screen, the frames are gone. But the plot preview shows there are no images showing in any viewport.

How can I just turn off the viewport frames so when plotting I can see what's in the viewport.

View 6 Replies View Related

AutoCAD 2013 :: Hide Constraints Fails On New Objects?

May 15, 2013

I have infer constraints to off (just in case) and I have these hints on every rectangle (in example) i create.

I do click on "hide all" but on every new creation I have the hints again......

I dont understand this behavior. 

if I want to hide all I want to hide all always....

Civil 3D (2013) how much you have to improve....

View 2 Replies View Related

AutoCAD 2013 :: How To Hide When No Value Is Present In Field Expression

Aug 6, 2013

I have created a Field expression inside a multiline text to extract a block attribute value, but i would like the --- value that it shows when there is no data to be extracted from the block to be invisible.

is there a Diesel expression for this?

Or an Autolisp.

or can you put in ifblank function like excel??

View 4 Replies View Related

AutoCAD 2013 :: Create Hide Situation Using AM2DHIDE Command?

Oct 8, 2012

How to create hide situation using AM2DHIDE command in AutoCAD 2013? This command was exist in AutoCAD Mechanical 2009. But when i tried to edit this command in AutoCAD 2013, it displyed as unkinown command?

View 3 Replies View Related

AutoCAD 2013 :: If Click Auto-hide On Anchored Palette To Open It - Detaches From The Anchor

Mar 30, 2012

Currently using 2013. In 2011 or 2012 when Anchoring Right (or Left) a palette Auto-hide has behavior that seems odd to me.  If you click Auto-hide on an anchored palette to open it (and presumably keep it open) it detaches from the anchor.  And then when you close it you lose the palette on the anchor.  To me this wastes time.  I'd like to keep that palette open to work a bit and not have to hassle with it by not having it open, but at the same time don't want to waste time later calling it up and anchoring it again. Is this still happening in 2013?

View 1 Replies View Related

AutoCAD 2013 :: Scale In A Specific Plane - Rather Than Uniformly

Jan 28, 2013

I am trying to scale a 3D object in the XY plane only, however the gizmo only lets me scale uniformly on all planes. I am trying to shrink the diameter of the cylinder without changing its height. The Set Constraint option (via RMC on the gizmo) only allows for XYZ, all other planes and axes are grayed out and not available. 

how to scale a single face of a 3D object, such as the top of this cylinder? Say, if I wanted to scale the top to make it more conical, for example.

View 6 Replies View Related

AutoCAD 2013 :: Set Specific Width Of Polyline On One Layer

Sep 20, 2012

I know you can change the width of the polyline by using the command "plinewid". Is there a way to set a specific width of the polyline on just one specific layer?

For example, I create a layer called "WIDE", and I want the width of the polyline to be 4".  But i want the pline width to be 4" ONLY whenever I draw on this particular layer called "WIDE"; but if I draw on the other layers, the polyline width would be back to the default width.  Is this even doable?

View 7 Replies View Related

AutoCAD 2013 :: Drawing Lines At Specific Angles

Sep 11, 2012

If I am drawing in 3D and I want to draw a line with a specific angle, how do I choose the plane that it is drawn in? Cos whenever I specify an angle the line is drawn in the horizontal plane

View 2 Replies View Related

AutoCAD 2013 :: How To Assign Open Command For Specific DWG To Button

Feb 25, 2013

I'm trying to find out how to assign to a toolbar button the open command for a specific drawing.

The code I input at the cui is ^C^COPEN;"//server/subpath1/subpath2/legend.DWG";

The answer I get is

Command: OPEN

Command: //server/subpath1/subpath2/legend.DWG "

Unknown command "DWG"".  Press F1 for help.

View 9 Replies View Related

AutoCAD 2013 :: Unable To Select Objects On A Specific Layer

Jul 8, 2013

I am working on a .dwg file in AutoCAD 2013 , and on one specific layer (defpoints), I am not able to select any of the objects. Initially, I thought that the layer may have been locked or frozen, but it is not. Additionally, I went ahead and locked then unlocked the layer as well as froze then thawed the layer, still not able to select any objects on the layer.

My next attempt to fix the problem was to run the command "AUDIT", and instructed to "Yes" fix any errors detected. The command seemed to execute correctly, however, it did not do anything. The objects on the layer still cannot be selected.

View 3 Replies View Related

AutoCAD 2013 :: Set Each Layout PSLTSCALE Value To 0

Dec 15, 2013

I have 10 layouts then i will set each layout PSLTSCALE value to 0 but when i return to the layout that i already set, the PSLTscale value become 1 again.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved