AutoCAD 2013 :: Heavy Lineweight In Plot Using Plotstyle
Apr 5, 2013
I have a drawing with several views from the VIEWBASE command that turned out great. I ended up having to use a viewport for one of my views because certain features wouldn't show in a base view. The problem is, the lineweight of the viewport looks quite a bit heavier and more pixelated than the base views. I tried it with my own plotstyle and several of the generic autocad ones.
How can I make the viewport look as crisp and clean as everything else?
I've attached a screenshot for reference.
View 4 Replies
ADVERTISEMENT
Jun 16, 2013
I am running two networked computers and a networked Designjet 510 plotter. One computer runs LT2013 and the other LT2014.
I am having an issue with the LT2013 machine in that it plots much darker than it should (uses a heavier lineweight). I have checked the plotter set up and plot style and both appear the same.
View 1 Replies
View Related
Oct 21, 2013
I am using Autocad 2D for a drawing, and my lineweight refuses to plot correctly. I didn't use a ctb file, but I changed them by hand each one. Most of them works correctly but some of them not. When I go to the properties window, every of them have the good lineweight, it's when I plot them in pdf file and open them in Adobe reader, some still have the 0mm (wrong lineweight). However they show they are the good size in properties window, but they plot differently.
I just realize that when it shows in adobe reader it shows the wrong lineweight, but if I convert the pdf into a jpeg and open it with windows photo viewer, it shows the correct lineweight.
View 6 Replies
View Related
Jun 18, 2007
I am finding that my DWF files sent to the plotter are plotting with the linework being heavier than the same file sent directly to our plotter. These are just lines that should plot with a narrow width (ie walls on a floor plan) but they seem to be about twice the width and hence look "darker". Is there a setting that I am missing or some other way to get the lines to plot out thinner? Also, TTF fonts plot thicker in DWF. I've tried the various options in the DWF viewer when sending to the plotter, but none seem to work.
View 6 Replies
View Related
Oct 1, 2013
I have an interrogation: If the lineweight in my .pc3 file is set to "Use object lineweight" & that color is assigned to a layer with the lineweight set to "Default" How is the lineweight determined when plotting (assuming no lineweight overide on any objects)?
View 4 Replies
View Related
Jun 21, 2012
When I create a drawing in model space and then take off several views onthe new layout command, when I go to plot the layout in PDF all the viewsappear with a really thick line weight
I have tried selecting every part of the layout and changing the weight to 0mmas it was before but it doesn't make any difference...
View 1 Replies
View Related
Aug 16, 2013
Am trying to plot my drawing to a pdf, but none of my thicker line weights are showing up when plotted to pdf . Am using .stb style and all my line weights etc under general properties are set as by layer.
View 5 Replies
View Related
Apr 18, 2011
I have an xref in my drawing. I am trying to use a VP override to make a layer plot with a lighter lineweight. I have changed the layer to number 9 (set to plot light) in the viewport and the layer changes color. When plotting the layer does not plot with the correct lineweight. The object color on the layer is set to bylayer. Visretain is set to "1" What is wrong? Why isn't the layer plotting correctly?
View 9 Replies
View Related
Feb 13, 2012
How to add and delete a “lineweight” from the lineweight list?
I’m wondering if there is a way to add and delete lineweight from the lineweight list?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Sep 12, 2012
Text style has no room to specify the lineweight!
I’m wondering why the “text style” has no option to specify the lineweight.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Mar 18, 2013
I have tried and failed to set line weight of object after baseview command. Its very thick line and showing the 2d object views in very bolds lines when i am trying to take print it is horrible to see it.
I am using Autocad 2013 version
View 2 Replies
View Related
Aug 13, 2012
Our office recently upgraded from AutoCAD 2005 to the new version AutoCAD Architecture 2013. I’m having difficulty finding the layer override toolbar for the lines. I have found that I can change the color and/or line type of an line in the properties dialog box but in AutoCAD 2005 there was a toolbar specifically assigned for the color, line type and line weight of a line. Dose that toolbar still exist in 2013 or do they control this in another location.
View 9 Replies
View Related
Sep 30, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
View 1 Replies
View Related
Feb 9, 2012
I am not able to find monochrome.ctb when I click on File -> Page Setup Manager -> Modify -> Plotstyle table my only selection are .stb files which are color. When I try to add a new file it will not allow me to do a .ctb file or changes the properties from color to grayscale.
I have gotten a driver for monochrome.ctb from my co-worker. I clicked on File-> Plot Style Manager-> Add-A-Plot Table Wizard and then walked through the steps to upload the monochrome.ctb drive. The drive then appears on the list of drivers in Plot Style Manager. However it will still not let me select monochrome.ctb as an option to publish to. Is there something that I have not tride? Am I able to use .ctb in AutoCAD LT 2012?
View 2 Replies
View Related
Sep 23, 2013
They have 3D objects in Model Space and setting up viewports in Paper Space to print out everything. The problem is that the viewports are ignoring the plotstyle settings. Everything should be plotting out black and white.
I will attach a screen shot with comments for each viewport.
My thoughts are that the Visual Style has something to do with it, but I can't figure it out.
View 5 Replies
View Related
Nov 21, 2013
I am trying to assign a plotstyle to attribute while creating a block. First I create the block, then I insert the Blockref, in that process I have errors assigining a plotstyle to the attribute. (I have also tried to assign the plotstyle while creating the block and attribute with poor results.)
Here is my attempt to do this:
For Each objId As ObjectId In blkTblR
Dim obj As DBObject = objId.GetObject(OpenMode.ForRead)
If TypeOf obj Is AttributeDefinition Then
[Code].....
View 1 Replies
View Related
Dec 17, 2013
How can you balance a heavy auger?
It can vary from 8ft to 12ft long 24inch diameter 3/8 to 3/4 inch flighting.
No problem doing a static balance but when it is rotating its off balance end to end and shakes the equipment its on.
Not only is it hard to figue out how much weight to add but at what l degrees.
I do know the weight has to go on the ends .It there a way of getting it close with the simulator and if it is how do I go about it?
View 3 Replies
View Related
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Jan 16, 2013
All lines in model space appear thicker when I zoom in.
how to change this behaviour so they show the same weight thin in the computer window?
View 3 Replies
View Related
Feb 3, 2013
Sometimes I get xrefs that just seem to drag the system down - also on high end systems. This especially happens if I start throwing the view-cube around. Have you got any tricks on how to make such xrefs more "easy" on the system?
View 6 Replies
View Related
Aug 29, 2012
We have all of our job files stored on our network. If you open a sheetset from one of those network folders, it will open normally, you can view and scroll thru it normally, but the second you select / right click anything, it locks up cad (grey screen) and shows us the hourglass for 3-6 minutes, and then allows you to work with it, but with a 10-20 second delay on anything you try to do. If you copy the same job folder to the C Drive, and re-open the sheetset, it operates perfectly. Running a constant ping to our server returns a <0ms return with no lost packets.
View 1 Replies
View Related
May 28, 2013
I am trying to generate bolted connections using the heavy hex bolts - this family does not appear when trying to select - I only get Cap Screws and standard Hex Bolts (amont the slotted varieties) - why no heavy hex hd. structural bolts?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
View 6 Replies
View Related
May 13, 2012
NO, I don't have any problem with making a helical hand rail along the circumference of a spiral stairway (or helical stair stringer)!
My only problem is that the method which gives the best visual results (viz. extrude or sweep circle or region along spline) will give a "HEAVY" solid model that HINDERS the performance of AUTOCAD.
Therefore I mostly use the extrusion along a 3D-polyline that gives a a lighter model but less nice visual results (especially when using flatshot for 2D model "representation").
Can I set some system parameters that increase the performance when extrude or sweep along a spline ?
Standard I use a lot of blocks to increase the 3D perfomance of AUTOCAD, this however is not possible when a visual continuous hand rail is preferred.
View 9 Replies
View Related
Oct 24, 2013
I want to be able to plot a drawing as a PDF (to send to customers, vendors, etc.) and not have the PDF able to be converted back to a DWG (as so many programs out there are able to do).
View 3 Replies
View Related
May 17, 2013
Having an issue where the .ctb works in some paper space tabs and not in others. When we do the plot preview on one tab the line weight is correctly shown, and when we go to a different tab, the preview displays colors and no line weight. We tried this on two separate machines both running the same operating system, AutoCad 2013 and using the same .ctb.. We tried creating a new copy of the ctb. There must be a setting that is different in the viewports, but I can not figure out what it is.
View 6 Replies
View Related
Feb 13, 2013
I only revised the text on my drawing and wanted to reprint my layout, but the 3D view disappears when I change the "view type" and will not plot. After hitting "regen" command several times, the 3D view types finally appear but are not even accurate - "Shades of Gray" is showing as "Sketchy", etc.
View 1 Replies
View Related
Apr 20, 2012
I just switched over to 2013. I am trying to make a 2d drawing from a 3d model. In past releases I always would plot to DXB and select hidden plot style. In this 2013 I select hidden but it does not hide anything. Is there a new way to acheive this in 2013.
View 2 Replies
View Related
Dec 13, 2012
Lets say that I want d drawing to be printed on scalw 1:50 why do I need to input at the plot properties 20mm to 1 unit in order to get it correct?
Also different question. If i want to print on paper roll and the one dimension of my drawing is 297 (A3) and the other dimension is undifined how can i set the paper size? Because under the drop down menu paper size the sizes are all fixed.
View 3 Replies
View Related
Oct 25, 2012
I have a drawing that refuses to plot the raster image when i plot to a PDF. It will plot the raster when I send it to the plotter. The raster is visible in the print preview. I've tried using the Adobe PDF driver and the DWG to PDF.pc3.
All I get is the line work.
Plot tranparency is off. Image is at Brightness 50, Contrast 50, Fade 0.
Autocad Map3d 2013
View 5 Replies
View Related
Jun 6, 2012
I have just started using 2013, and everything works just fine, with the exception of trying to plot. I am able to plot to PDF, but if I try to send a job to any of my network printers/plotters, AutoCAD crashes.
I am on a Dell Optiplex 990, Windows 7 Pro, 32bit, Intel Core i7 proc, 8GB RAM
View 9 Replies
View Related
Nov 5, 2012
I use .STB Plot Style more often (as our Standard Format) which is easy to use for me, and once in a while use .CTB plot style. Since .CTB are more often use by others, and would like to develop a new standard layering format.advantages and disadvantages or differentiate of this two plot style in its actual application.
View 3 Replies
View Related
