tried to install AutoCAD 2012 with SCCM. So I configured an automatic install for it. Tested the installation by clicking the link... everything is fine. Then uninstall and tried to roll it out with sccm: The installation works but there is no shortcut for Autodesk Design Review 2013. Not on the desktop, not on the startmenu Why?
Don't want to do that manually on 40+ computers..
We have to often present our designs at Design Review meetings and currently use the Design Review software for this purpose. We have noticed that the Design Review software rendering is a bit poor compared to the actual Inventor assembly file. Is there any other software we can use to show the design, other than Inventor, as we do not have Inventor in the meeting room?
View 9 Replies View RelatedIn the process of migrating from 2010 to 2013, all seemed okay at first. Now when I open 2013 i have no ribbon and my keyboard is no responding to shortcuts. For example in 2010 is used the keyboard i key to insert blocks.
View 7 Replies View Related I been trying to make a deployment of Autodesk Building Design Suite Premiun 2012 from
a pc with XP 32 Bit, XP 64 Bit, and Windows 7 64 Bit and the aplicaciton stars well but then after a couple minutes. I got this error.
Cannot create deployment - "The copy functions cannot be used D:x86RAC2012
I am currently trying to export models into dwfx format for design review and freewheel. However, I have a problem opening the dwfx files that are 16,000 kb in size or higher. How to make the file smaller in Revit.
View 2 Replies View RelatedWe're currenlty on SP2
[URL]
This is the particular setting we've setup for iProperties that worked fine in 2012:
Here's what it looks like when you actually type the letter:
Anything else I should check settings-wise that may be causing this?
I had command shortcuts created in 2012 (in the acad.pgp file) for AECC commands like drawing feature lines, trimming feature lines, etc. My shortcut commands that began with AECC aren't working in 2013, perhaps becasue these now pull up a dialogue boxes before the command is shown in the command window? How I can get keyboard commands to work for this? I'm lost now looking for all sorts of buttons!
View 2 Replies View RelatedMy company have recently upgraded from Inventor 2010 to Inventor 2013, on the whole I like it a lot better but there is one feature I can't find or Autodesk have removed. I have attached an image of what I mean if I haven't explained it very well but on the browser bar there used to be a drop down 'design view representation' that you could change back to 'master' quickly. I found this very useful as I often use the 'visible' tool to hide parts then want to unhide them all at once. Is there another way of doing what I want or does this tool exist hidden away somewhere else?
View 3 Replies View RelatedI work with Autodesk Plant Design Suite Ultimate 2013, and I can't find Tube and Pipe?
Is it installed in this version?
In the “Create & modify a deployment” I am not able to add in multiple Printer Configuration Search Paths or multiple Plot Style Table Search Paths. This feature is available inside of Autocad but not in the deployment. Why?
I would also like to include a profile in a deployment package. Is there a way to do that other than include it as a switch in a customized shortcut (which is a crappy way).
I have some stand alone AutoCAD installations, and I want to know if is posible to hide the SN. I know that when I create a deployment I can select the silent mode to hide this, but I have many SN and i dont want to uninstall the software.
View 1 Replies View RelatedI am trying to deploy Autocad LT 2012 via SCCM. The command I am using is "%~dp0AdminImagesetup.exe /W /Q /I %~dp0AdminImageLT2012 64bit.ini /language en-us". This works fine from CMD but when I try to deploy it after 6 seconds I get the error "Autocad LT 2012 exceeded the maximum allowed run time of 120 minute(s)".
View 1 Replies View RelatedI have had AutoCAD LT for 3 months and it has been great. But all of a sudden it is not recognizing the shortcuts like "L" for line, and "M" for move.
Where did they go and how do I get them back?
I have a drawing that contains an alignment and 2 profiles (existing and proposed). Call this File A.
I created data shortcuts for these 3 objects and reference them in many drawings.
Last week File A was having some problems, it was inexplicably large and seemed to have some corruption I couldn't fix. So I created a new drawing, call it File B, and promoted the alignment and profiles into it.
I used Data Shortcut Editor to point the data shortcuts to File B. In drawings that already referenced these objects they look like the they are coming through just fine.
The problem is that I can't see the profiles listed in the Data Shortcuts section of prospector. The shortcuts folder selected is correct, the xml file is there, it points to File B. The alignment is listed and I can create that reference in a new drawing. I also can't find anything wrong with File B.
I installed AutoCAD LT 2013 on Friday. Everything was working fine until this morning. I found, as of this morning that my keyboard shortcuts don't work. eg 'l' to draw a line or 'e' to erase an object.
When I try to edit the acadlt.pgp file (Tools/customize/edit program parameters) I get the error message acadlt.pgp could not be found.
I read in another thread that after changed are made to that file the 'reinit' command should be run. on doing this i get the error message ' Dialogs are not available because DCL files are not loaded' .
Noticed Keyboard shortcuts not working from time to time in Inv 2011? It's ultimately frustrating because I cannot figure out what is causing the issue. Some times restarting Inventor or opening the keyboard shortcuts customize window works and sometimes it doesn't. Standard default shortcuts like "ctrl + p" for printing and custom shortcuts I have added both don't function in Inv. but work just fine in other programs.
Another undesired problem is after rebooting our machines the Project file is switched back to default.
my co-worker can not setup his drawing's data shortcuts. So, we tried to set the working folder. He has no real options for working folders. There is only one project folder showing for him. how to get all of the project folders to display in the set working folder dialogue so we can select the correct project, then select the correct data shortcuts. He is using C3D 2012 on a windows 7 64 bit machine. His folders have black arrows instead of plus signs. I've attached a picture. The Monterey Projects folder should display several hundred project sub folders and you can see we only have the one folder of 2916.
View 9 Replies View RelatedI have been using Dropbox to collaborate with a remote office. The problem we ran into was that for some reason, data references don't work when a drawing is reopened. In other words, when I open a drawing, none of the objects I dref'd into the drawing showed up. In the Toolspace, the objects appear just fine (i.e. no broken reference indications). If I manually synchronize the object, then it shows up int he drawings. If I save and then reopen, the reference is gone again. I have seen some info about Projectwise and the problems with dref's when using that program
View 4 Replies View RelatedI just switch from CS3 to CS6 and I am missing some keyboard shortcuts in Photoshop CS6. I used to be able to toggle between a layer and it mask using (for PC) crtl ~ Now, in Photoshop CS6, that shortcut switches me between the open windows. Ctrl still gets me onto the layer mask but no shortcut will take me from the layer mask back to the actual picture. I also can't even find the options in the shortcut menu to create a keyboard shortcut to toggleback from the layer mask.
View 2 Replies View RelatedI am running Civil3D 2011 on Windows 64 machine and am wondering how I go about setting up multiple working folders when using data shortcuts. I have two different projects I am working on, for which I set up surface data shortcuts, but the 2nd one I set up over-wrote the 1st folder and so now that surface is not properly shortcutted into that project. how to set this up, for I am new to the whole shortcutting game?
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
I've just switched to a Mac from Windows, I'm using CS3 and in Photoshop on Windows there was an easy option in the Layers pallette where I could toggle through the blending options by using the down arrow key which also showed a live preview of the "blend".
I can't seem to activate this on the Mac version -
Just got my new copy of PS/CS delivered, and all initally seemed to be well. However, I've noticed certain keyboard shortcuts don't work anymore - namely New > Layer via Copy (CTRL+J) doesn't do anything and neither do the arrow keys for nudge. Very annoying.
I've had a look in the new Keyboard shortcuts menu, and it's all on default settings and appears to be fine.
1)the design acceleration tab in Inventor 2012 is missing, the problem is still persist eventhought i reformatted and reinstalled the product
2) In windows explorer, when i right click on the inventor assembly file, the dialog box doesn't appear the ''pack and go'' adn ''design assistant''
I have been using the same Working Folder and Data Shortcuts since January of this year. My AutoCAD crashed yesterday and ever since then I haven't been able to reset my working folder. When I select the correct folder, one that I have been using for the past 8 months, the program just freezes and will do absolutely nothing for as long as I will let it sit. I even tried selecting a parent and child folder of the shortcuts folder, just to double check I was selecting the correct folder. When I select the wrong folder, nothing happens, but when I select the correct folder, the program locks up.
View 5 Replies View RelatedInventor Pro 2013 SP 1.1
I’m suing the Mould Design feature of Inventor Professional and need to have four cavities for this mould. When I try to use the pattern function nothing happens. I look at the Wiki help and it says that I have to enter values for X direction X distance etc, but this dialogue box does not appear.
How can I get the box to appear?
I got the same problem (shortcuts stop working after a period of time while in photoshop and I need to restart photoshop to make it work again)But now, It occurs every 10 secs. I CANNOT use photoshop at all. Just as I open it I got 10 secs to use the keyboard and then its over.
Everything is fully updated, as well as drivers. Nothing has changed in my computer since the last post.
For some reason on my Photoshop CS3 Extended, the shortcuts mess up.
It's probably me clicking something, but I don't know what it is, because I've always done the same thing as before and it only just started happening recently.
What's been happening is that whenever I want to use a tool like when you hit "Z" on the keyboard to activate the "Zoom Tool" it undos instead, like the "CTRL+Z" shortcut. Or if i want to use "P" for the "Pen Tool" it takes it as if i did "CTRL+P". But I didn't even do CTRL+anything, I only hit that one key. What exactly is the problem? Do i need to re-install Photoshop?
I have Photoshop CC through Creative cloud. My keyboard shortcuts stop working, then Photoshop really slows down, then crashes. I've been through Adobe support five times now, and it works for about 1/2 hour, then acts up again.
View 9 Replies View RelatedKeyboard shortcuts will work for a little while, then suddenly stop. I can still select tools 'manually', clicking the icons, but pressing P for the paint brush tool or E for the eraser will have no effect. So far as I can tell this happens at random. It has also been fixing itself at random, after some undetermined amount of time not working, but then it just happens again.
'Use shift key for tool switch' is already unchecked in my preferences.
I'm on Photoshop CS6
Mac OS 10.7.3
I've got like 580 gigs of free disk space, and 8 GB of RAM...
I think it is a setting error because it wouldn't work on my PC before or after reinstalling. So installed to laptop and no difference.
If I select an object - I cannot use the delete key. It won't do anything. I have to right click and delete.
I can't copy and paste or cut using keyboard short cuts (ctrl + x / c / v ) and a few others don't work.
BUT - when I type into corel - using the text function - and delete some of the text. It works there - and after doing this, for a few minutes, I can delete and copy paste to my hearts content within the programme. Then it stops again.
These shortcuts work as normal within windows and other programmes.
If I use shortcuts ( controle + N / controle + V etc. ) it doesn't work. How can that? And better, how can I make it work??
View 1 Replies View Related
