I am having an odd problem in AutoCAD 2014. I have 3D solids and when I cut a section through the building various objects in the 2D section are placed very far (like over 100,000 meters) to the left or the right of the main section. I have exploded all blocks down to their base components (all 3D solids).
View 1 RepliesI have yet another query to ask. I have created an assembly with standards parts and objects mainly;
1. Valve with Actuator
2. Stud Bolts with Nut
3. Angle bar
4. Objects (Clamps)
I wanted to show an ISOMETRIC cross sectional view of the said assembly. I noticed after doing it so, that there were missing standard parts/objects.
How do I make them visible on the cross section ISOMETRIC view?
I would like to place arrowheads on the vertical sectioning lines (for the hatched view on the right), as well as on the horizontal line (for the bottom view), but I couldn't succeed in doing this. So, I left it just as line without arrowheads. Also, I would like to know if there are options for dimensioning fillets, as the one in my drawing comes with round symbol of portion of circle upon which the arrowhead touch (instead of on the fillet itself) - see R.12 and R.50.
View 9 Replies View RelatedI just loaded 2014 onto a new computer and poof every custom toolbar has a question mark. Yet the image displays on the preview in the cui.
All of my button images are in a folder on my C: drive and that path is in the support file search path.
I went to one of the buttons and click on the small and large image and browsed to the folder with the BMP files and clicked it for both small and large.. And when I clicked 'ok' everything started to display correctly.
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedI downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View RelatedI have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
We have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
We are running a new copy and it IS registered.
Can AutoCAD do something like Showcase - display two drawings side by side and zoom them simultaneously?
View 2 Replies View Relatedusually if i want to align shapes side-by-side so that they have no gap between them, or 0px, i do it by cloning the shape and moving it along the direction its going and then zooming in on the gap. this is a 'by-eye', i'm sure theres a more definitive way to do it.
for example, if i am joining two square shapes together, to make a rectangle, how can i make sure the join is seamless and perfect?
The problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.
I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).
The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).
I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.
The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).
The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.
The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.
I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
Why combine objects together cut bottom side of combined objects?
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I recently upgraded to CS4 from CS2.
When I'm drawing with the Pencil tool at high magnification (1000% or more, doing icon work), the actual pixel changed is not the pixel I click on half of the time. In fact, it often is up to 20 pixels away, so it's not just some snapping problem. Half of the time, it doesn't even change any pixel in my icon (presumably, trying to change a pixel outside the smallish image).
Do I call support to get this logged and have to wait for a fix? Or is there some work-around?
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I'd like to section (Divide the area between the upper surface and lower surface of a 3d wire frame into sections.
View 9 Replies View RelatedI have to create a workplane and then define the section.
Usually the sectioning is done w.r.t flat surface/s and then the section plane can be offset depending upon our requirement and placement in the assembly. I am not getting this offset option when I want a Sectioned View. The section takes where I click on the flat face straight.
I needed to know the Side Opposite so that I could subtract that amount from a known line length.
I knew the angle (24) and the side adjacent (.9375) therefore SIN 24 = X/.9375 .0467= X/.9375 = .3813
When I measure the side opposite I get .4172
See attached screenshot.
When I resize an object (for example, I want to extend a horizontal line by 20%, using the % boxes in the property bar), the resizing action is executed from the center of the object itself (so, 10% to the left and 10% to the right in my example).
If that object is snapped to other objects, resizing from the center automatically unsnaps them and so snapping must be done again.
Is there a quick way (such as double clicking a node, or so) to resize an object not from its center, but from a side or a vertex of it?
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
When I make a half section view in an assembly the frame generator members do not section, they remain full length. Is this normal or something with my setup?
2012 SP2.
I'm using Autocad 2011 and trying to convert a 2D drawing into 3D using a Loft tool. However, I'm experiencing a bit of a problem. The Loft tool is creating an extra line between the two objects which messes up part of the design. I'm usind Solid and Ruled settings of the Loft tool and the two object I'm trying to join were created out of number of polylines which then were converted into singular poline using Edit Polyline tool.
View 5 Replies View RelatedA user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
When I stretch an object to the right using the right hand side handles, the left side of the object also moves slightly to the right. How can I stop this from happening and keep have the left side stay perfectly in place. Is there anything in the settings I can change?
View 4 Replies View RelatedMy pc is being upgraded next week (while I am away on holiday). The IT guy will be adding 4GB of RAM and will be switching from 32bit win 7 pro to 64bit win 7 pro, obviously, this will mean a clean install and re-installing all my software. I have my tool palettes set up with many blocks, leaders, hatch patterns etc and I want to know if there is a way I can save my tool palettes and then reload them onto the upgraded pc with the re-installed AutoCAD LT?
View 5 Replies View RelatedFor some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies View Relatedi have been drawing a 3d model and when it comes to dimensioning, i can only do it for the vertical and horizontal distance from the top view. i cant find a way to dimension the thickness of my model from the side or ront view.
how do i change the settings for this..
I have just installed AutoCAD 2014 with our company update and I am having problems using our tool palettes.
When I click the buttons on the palette to load our blocks I get the message below:cad2014 tool palette error.png
I've checked the directorys of the tool palettes and they are routing to the correct location.
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
I've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies View Related