AutoCAD 2010 :: Retrieving Xref From Binded File
Jul 18, 2013I am using an AutoCAD 2012, when a revised Xref floor plan was send but on a binded file. How to declare or make an Xref file based on the binded file????
View 2 RepliesI am using an AutoCAD 2012, when a revised Xref floor plan was send but on a binded file. How to declare or make an Xref file based on the binded file????
View 2 RepliesWhen inserting an xref, which I have prepared with a file name etc in a drawing, Autocad prompt me this message" The file you have chosen cannot be used as a block name or is greater than 8 characters. Autocad has assigned a shortened block name. Enter an Altenate name "
why so? This happen not with all file!
Can I convert a DWF into a DWG without it being a XREF file ?
View 5 Replies View RelatedI am working on my xref file and all of a sudden in my layer properties, all of my layers are missing. It's as if they are still there but invisible, I put my cursor over them and a box comes up with the layer, but I still can not see it or modify it.
View 1 Replies View RelatedI know that in ACAD you can use the xref manager to see where the actual file for the xref resides on your computer/server/etc. What I'm curious about is whether or not the inverse action is possible. Can you somehow access the file (not the output sheet where it's being xref-ed) and see what other files are using it as an xref?
I've come in on a project that is nearing completion and have been assigned the task of "cleaning up the project folder." Unfortunately, there are a ton of files in the different folders that are no longer in use on the final output sheets and I need to keep the ones still in use and archive the ones that are no longer needed. What I've been doing is going through those sheets and reviewing the xref manager for each sheet to see which files are actually put onto those sheets and making a physical checklist from which to organize my findings. Once the checklist is made, I then archive all the files that are no longer being used.
Recently changed file names and now need to revert back to the original file name created via camera. Can this be done in LR 4 or is this info deleted?
View 1 Replies View RelatedI have a more then 10 folder(Irrigation-Telephone-electrical- general layout-profile etc) and one x-ref folder i want to attached that x-ref with all folder files in that folder more then 10 files so how can i attached that x-ref with easy way if i attached one by one its time less so any easy way to attached x-ref in multiple folder.
View 0 Replies View RelatedLets say I have file 1 and files 2,3,4, file 1 contains several layers and is an xref in files 2,3,4.
Can I somehow set a layer to off or frozen in file 1 and it will make sure to be switched off in my files 2,3,4 aswell? I have played around with New VP Freeze but if I add a layer at a later time and files 2,3,4 already have several viewports that doesn't do me very good.
I am not sure if i ever noticed this before, but if I get a dwg file from an architect who has XREF another dwg background and then I enter the command _AECEXPORTTOAUTOCAD2010 on the main dwg will that take all the XREF files and convert them to blocks as part of the exported file? This seems to have been done and wasn't sure why?
View 1 Replies View Relatedi open a cad file with an XREF inside, then an error appear indicating that 1 file is still unloaded.
i locate the location of that xref file then load the file, after that i click reload all references but still the xref file appear unloaded.
I have an xref that I am trying to xclip. Normal xclip works fine, but when I try to invert the clip (which I was I need), a light grey background shows up (in preview mode and on prints) around most of the boundary, and takes up most of the screen.
It also clips objects from other xrefs along the plane of the boundary, even though they're not actually within the boundary (they are visible in the drawing, but clipped in preview mode). I have purged and audited both drawing and xref.
How do I bind an ex referenced image file?
View 1 Replies View RelatedI am trying to reference a drawing in AutoCAD 2012 and whenever I try to atrtach the drawing by XREF it does not come in viewable. none of the layers are seen. this is the second or third drawing that this has happened to me. I have checked to see if it is on a frozen or off layer. or some non-plot layer. I have opened a fresh drawing to reference it in. none of these have produced a result. The only thing different about the layers is that the layer rhombus, which is usually Blue, is now grey
View 3 Replies View RelatedI have one file (file A) which xrefs several files, all with various layers turned on and off. I created a new file (file B). I xref file A into file B, and ALL layers in file A's xrefs are turned on, and I have to go into layer manager and turn off all unwantd layers. Is there any way to make it so that the layer state in file A is kept, when xreffing it into file B?
View 6 Replies View RelatedAny way to control the visibility of any XRef in a drawing using Excel or Text file. For instance, I have 50 Xref placed in there positions and I want AutoCAD to select what should be visible by reading an external file--Excel or Text file.
View 1 Replies View RelatedThe line weights in the xref are as they should be - I can change the line weight (plot by layer/color) and it plots correctly; when I attached this file to another drawing, the line weights do not plot. I can change the layer color to modify the weight (.ctb file) and the correct line weight appears on the monitor, but when I plot - the line weight looks like a standard default width.
I checked the lwdefault in the xref and three other drawings, and in every drawing it is set to '25'; the lines are lines (not plines), and have a zero elevation. The units are the same as the other drawings;
I believe it's a setting in the drawing (not the xref) - what setting it might be.
We are a small company with two PCs - 1 laptop and a server. We are having problems using xref drawings across the network. The laptop is mapped to the Z drive and the reference file is on the server (D drive). Each time we open a drawing on the laptop (Z drive) the xref files which is saved on the server (D drive) cannot be seen. We reattached the file and it works fine until we closed and reopen the drawing. When the drawing is opened on the laptop the xref is not loaded on the screen. However, the file extension can be seen but no drawing is visible.
In summary how can we tell get the laptop to permanently reference xref files saved on the server without them dropping out?
When saving an AutoCAD drawing there is a Thumbnail image saved (if you have the option turn on), but when the command "Edit Xref In-Place" is used there is no Thumbnail image saved. So now when I try to preview any drawing that has been edited through this command there is no longer a thumbnail.
I am using AutoCAD 2012 and the option to save a thumbnail is turned ON.
Is there any options for Xref files and/or attributes to screen down or fade down other than changing its color to gray?
View 4 Replies View RelatedWe have a base drawing that is xreffed into other drawings, it is made up of various building sections (some horizontal some vertical). We have dimmed the grids using linear dimensions. When we bring in the drawing as an xref and rotate it 90 degrees (so the vertical sections are now horizontal) all the dims are now upside down.
Is there a variable/method to stop this from happening.
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
How do I globally change the Xref path to a new server? I tried adding it into the support/working path in Options etc. but hasn't up-dated drawings. I manually changed one drawing (there are posts on this) and it works, but I have many drawings and would like to keep the date last modified also if possible.
View 5 Replies View RelatedI'm attempting to bind an xref into a drawing. I keep getting an error message: "Some objects in the specified xref failed to bind." Any reason why some objects couldn't bind? I've thawed all layers in the drawings..
View 3 Replies View RelatedIs there a way to set up a multileader on my tool pallet to automatically pull an xref name when user selects it?
user selects multileader
user selects point on xref
user selects landing location
xref name is inserted as a field
trying to save a few clicks over inserting field
I am using autocad arch 64 bit on win 7 and am having problems switching out of xref classic so that the newer xref dialog comes up. i edited the SDI but then i cant close a drawing and opening creates more problems.
is there a way to get the xref dialog back?
I am trying edit an Xref in place in a sheet file both through the paper space view port or within the sheet file's model space but receive a pop-up warning that states "Selected Xref Block is NOT editable". Other sheet files are set up the same way and allow edit Xref in-place.
View 1 Replies View RelatedIm trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies View RelatedMy computer is not searching for the xrefs correctly. Whenever I switch to another job and try to load an xref, the computer searches under the last job I worked on and nothing else. I have several folders listed as search paths but it just seems to be ignoring them. We never used to have this problem and I cannot figure out what has changed.
View 2 Replies View RelatedI have a file I received from a consultant that has an annotative block in it. I've been trying to xref (attachment, not overlay) it into our files, and it's not showing up. I've got the affected layers on, the block units for both files are identical..
This block has editable attributes in it. The attribute is what is not showing up...the point, which is the other block component, displays correctly in the xref.
I wonder if its possible to Xref in DWG TrueView 2012, right now I can only open either the "Building drawing" or the "Plumber drawing" and I need to see them both.
Can I Xref or is it any other way to solve my problem?
I have a few xrefs loaded into my drawing and I want them all to appear greyscale (color 9) so that whatever I draw on top of the xref is in color and is easy to spot..
I have tried putting the xref on a layer that is default color 9 but the xref is still shown in color. How to set the xref to color grey?