I am drawing an icon holder for a church. However, I got this problem, where I need to change the width of a piece but keep the height. So scaling wouldn't work as scaling would change both the width and height.
I can't use trim and cut from the middle as there is a block in the middle of it. and if I do that it will cut the block in all location.
I am not sure if there such an option in AutoCAD.
I need to change the width and height of some text i'm inputting to and image so that the height is 100% and the width is 75% in ariel size 11, how do i do it? I cannot find the answer on google,
also, the phrase capitalized, is this some special setting or does it just mean write in capitals
I 'm attaching images through c# using lisp _image and sendcommand in a predefined rectangle.
how can I specify width and height of the image so the image is exactly placed inside the area that I want?
(scale is not a good option because as image ratio changes scale must also change).
I've created a data link, linked to my autocad drawing, checked the box to keep excel formatting and update. Once i Import the table, the size of the table is NOTHING like what the size is in excel.
I have my page layout in excel to be 11 x 17 landscape. I have my table at about 9 1/4 x 15 landscape. Once I import it into autocad, it is now about 6 3/8 x 20 1/4. I don't know what i'm doing wrong but i need it to transfer just like it is in excel as far as the size of it.
I have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
View 4 Replies View RelatedIs there a way - or 3rd party app or lisp- to change the width of multiple Mtext objects all at once? I have several drawings where the width of all Mtext objects is 1.25, and I would like to change all of them to 1.
View 8 Replies View RelatedWhen I create new mtext in my drawings I normally like to have a zero width.
Instead I'm creating new mtext and it has a set width that I am unable to change in the properties window.
I have no problems with changing the justification point.
Is this a setting that I can change?
Plus is it posible to change the default so that I don't have to worry about changing it every time?
I'm teaching myself 3D from a textbook. The text gives an example of how to create a UCS that is located on a 3D example part from the CD that came with the book; this is done using the UCS command. It also shows how to use the viewport presets. I was able to move the UCS as needed around the part, I was able to use the viewport presets to look at the part from different sizes, but if I created a UCS and then used the preset views, the new UCS I created did not stay oriented, but instead appeared to default to the origin. But when I rotated the part with the mouse without using viewport presets, the UCS stayed put.
View 2 Replies View RelatedI usually draw in model space 1:1 and then scale my drawing in paper space to fit my sheet, but when I'm scaling I also scale my text. Is there a way to keep my text at 1/8 even after scaling my drawing from model space?
View 9 Replies View RelatedSuppose I have a rectangle 10 x 8 and then I join the middle points of the widths with a line ... so I will end up with 2 boxes of 5 x 8. Now what I need to do is to stretch the side by 2 units to become 12 by 8 but I want the middle line to move automatically during the stretching process so I end up with two boxes of 6 x 8.
View 9 Replies View RelatedHow can i take size(width, hight) of rectangle in file autocad when i click it. And then will show this information on form in vb.net.
View 3 Replies View Relatedi want to get all text font , text height and text widths on the drawing
Dim ListFont As New List(Of String)
For Each TextStyle As AcadTextStyle In ThisDrawing.TextStyles
ListFont.Add(TextStyle.fontFile)
Next
i used those code can get all text font on the drawing...but i only want to get text font which were used.and i dont know how to get the text height and widths on the drawing.
I am trying to draw 3D models for the first time, and something is confusing me. Sometimes when I draw a rectangle and it asks for a length width and height it seems the width means something else and the width means something else. I think the width means the distance from the z-axis on the XY plane, but then sometimes it is the distance from the Y-axis on teh XZ plane. I am just wondering if there is a good way to keep that a constant, or to remember which the length, width, and height is referring to at any given time.
View 9 Replies View RelatedI would like to determine the length, width, and height of a assembly.
Can i use the bounding box method to do this, or the range box?
I am looking for a way to customize the dimensions of Autocad Tables to that I can have custom cell height and width.
How to do this?
Table v1.dwg
how to link a door frames width and height to the door schedule? For example if I have a 3'-0" x7'-0" door the frame width would be 3'-4"x7'-2", I would like this to automatically generate in my door schedule when I insert a door without me having to manually put it in. I am using AutoCAD Architecture 2010.
View 6 Replies View RelatedI am creating an upper cabinet which has a fixed height but you can select different widths. What our firm does is also list the size of the cabinet. What I would like to do is make this font some sort of preset attribute and control it with the visibility states. I also want to control the font height by the scale of the drawing. my question is I if its possible and how? I've attached what I have thus far. The attribute is in teh top right corner and is justified as top right. The only way I can get this to work is if I manually adjust the font after its inserted into the drawing.
View 5 Replies View RelatedI am trying to create a custom message box with variable width and height by passing width height title and list of text. I can get the routine to work if I use preset width and height, but would like to make the box adjustable.
Here is what I have so far -
;--dialog box--
MYmessage :dialog{
label="Custom message box";
:column {
:text {
key="MY_message_Title";
fixed_width_font=true;
[code].......
I want to specify a selection, is there a way to do that, or to show what pixel number you are on in Photoshop 7.0? I have an image that is 200w X 127h. I am going to be slicing this into two different images. My top image needs to be 200w X 91h and the lower 200w X 36h.
View 4 Replies View Relatedillustrator cs4. when press on drawing or text, it cannot be adjust on it width or height by mouse! Photo 1 cannot adjust. Photo 2 (sample) can adjust
View 4 Replies View RelatedI have a brush that is square. Is it possible to change just the width or just the height and if so, how?
View 2 Replies View RelatedWhenever I am about to change the dimension of an element, in the option bar, width and height appear in percentages.
Is there a way I can make these appear in pixels?
Why is the contact- aware scale in grey and therefore unusable?
View 1 Replies View RelatedI'm trying to export an image of a certain width and height but when I click on export, the size doesn't remain the same. I try to change it back to the normal size but it's impossible as one number gets altered if I change the other.
I have tried with the "maintain aspect ratio" option checked and also unchecked. This has never happened before, I've always been able to export with the exact size I want, although very often I find the width and height change when I click on export but I have been able to change it back until now.
how do I add height (say 200px) to an image without distorting what I already have on the canvas? Whenever I add an additional 200px, everything stretches. How can I just add 200px of extra white/blank space to the canvas?
View 7 Replies View RelatedI want to write the words HAPPY and BIRTHDAY underneath each other so that the word HAPPY takes up the the same width as the word BIRTHDAY. I also want to make the HAPPY twice as tall as the word BIRTHDAY.
Do I need to adjust the spacing and/or width for each individual letter? I'm guessing I can make the HAPPY taller by some kind of stretching tool?
Where is the option to control page width & height so that you can make both even measurements? I typically get something like w 1920.4px & h 1080px. When I try to change the width to 1920 the height adjusts as well. I know there is a simple fix for this but I can't find it.
View 3 Replies View RelatedI am a professional web developer and I have been trying to do something for a while, well thats not quiet true I have achieved this but I cannot believe its as complex as it appears to be. I want to create CSS Sprite pages, I have looked at the graphic library with its buttons and to be honest they are great but I cannot get over how you can split the mouse over images from the static none roll over images within the layers section.
Just finally can I set a snap grid with a width and height so for example I want a grid of width 100 and height say 35? again to aid in me creating CSS Sprite pages.
I have two different images. Both are set at Height and Width: 7 by 10.5 inches. However, whenever I view them, the one is always bigger than the other one. Does this have something to do with the pixel dimensions? I see that the pixel dimensions of the one is much larger.
View 1 Replies View RelatedWhat is the max size of width and height in all measurement (Points, Picas, Inches, Milimeters, Centimeters, Pixels) when you create a new document? I would like it to use it together with cartesian coordinate system and ruler.
View 1 Replies View RelatedIn a training video on Illustrator cs6 a device is shown as follows, as the instructor manually resizes an Artboard using the Artboard tool:
Justin, the instructor, calls the little box that immediately shows width/height a "width and height box" but searching on that term is not productive. When I run the program the device is not available, not does the video explain what option makes it available or what might have changed on my particular copy to obscure or disable the box. While I know I can get the same effect by choosing the Info window, and can even adjust the parameters more precisely using the control panel bar, I would like to have the convenience of this box.
I note that in the same video series (from Lynda.com) the same type of display device is shown when the instructor resizes a graphic. After some 30 minutes of Google searches and searching for the identity of this device and how to enable it I come up empty.. An experienced Premiere editor, I'm trying to widen my skill set into more of the Adobe suite and new to Illustrator;