I recently installed the Building Design Suite. All installations and plugins were labeled as 'Install successful' (I have rechecked all installations for errors).
I am having trouble using the Sketchbook Plugin for AutoCAD. The 'SketchBook Designer' tab and it's content appears and works. When I create a 'New Canvas' the canvas appears on the screen, but the 'Create Canvas' tab does not sequentially appear. All of the settings do not appear and I cannot apply the canvas, hence I do not have any access to the SketchBook features.
I bought Sketchbook Pro a few months ago for my Android 10.1 tablet, and all was well.
Recently, I updated the tablet firmware to 4.0.4 - I don't know if that's relevant.
A few days ago I noticed that Sketchbook Pro would not load sketches form the gallery. It would pasue for maybe 10 seconds then the app would go away. No screen messages.
Sketchbook Express behaves in the same way.
UIninstalling Skewthbook Pro, renaming trhe autodesk folder, rebootnig the tablet, then re-installing does not renmove the problem, so this is something which survives all of that. Perhaps a file associations problem?
I installed apps to view the system logs, and I cam see:
EditFilepath: /mnt/sdcard/Autodesk/SketchBookPro/Sketch2017935.tiff - me trying to oipen the gallery sketch. Screen Width: 1280 Screen Height: 752 Image <2> onCreate
[code]...
- I have not includede log lines between these which say:
[date & time] D/Sketchbook(1170) or other 4-digit numbers
In other crashes, I see a NullPointerException from Java.
If I double-tap a sketch in the gallery, then I enter the gallery browse mode OK and can flick through the sketches.
If I upload the TIFFs to my PC< they open OK.
By manually deleting some TIFFs I did get the app to open a sketch of two briefly, but that stopped working within a minute or so, and has not worked since.
I have written to the support email given in the Market but been ignored by Autodesk.
I'm playing around with the new generate plugin and running into an issue. I have a pre-existing set of icons that need to maintain a 70x70 transparent background. Unfortunately when I set up Generate the assets are cropped to the pixel dimension of the graphic.
Is there a work around? Or do I need to go through each asset and resize it to 70x70?
I finally downloaded Designer Pro 9 and installed the 64-bit version and, to my horror, realized it does not support Photoshop plugins. So I uninstalled the 64-bit version and installed the 32-bit version.
But now I find that the live-effects tool seems to be missing from the 32-bit version too!
I had thought the 64-bit version might be a bit more stable, but the old one was pretty stable. So now I'm wondering if I should plunk down money for the new version.
I'm pretty happy with the previous version, which oddly enough is called Xara Designer Pro X (go figure). So I'm going to ask for a possibly politically incorrect and certainly unvarnished opinion: How much of an improvement is the new version over the old?
I use it mostly for making graphics for websites or for making posters, leaflets, and such. I do not use it for website design.
I have been running into an issue whenever I try to open up Photo Shop CS5 on my Mac. While trying to open up a document, whether it be a brand new one or opening up a previous file, the canvas is missing.
On the side in my workspace all the layers and options are visible but there is no image to be found. I have searched online and found that holding: "command+option+shift" will reset the preferences and that usually does the trick. Problem is that after I quite out of PS and reopen it, I run into the same problem.
when I work on autocad I cant send my file to sketchbook, I click where it says >> "Sketchbook" - Create new Canvas<< and after that, is supposed to display a menu to set the paper size of the layout but nothing happens,
I use Autocad and Sketchbook designer 2013 and I don't know if it has something to do with my OS, I have Windows 8. because of that I thought that if I install Autocad 2014 the problem would be solved but it doesn´t even show the "sketchbook" option.
I have used Xara designer for years as its generally easier to use, but still can't work out hot to easily create the Outline Path and the pathfnder merge shapes function as in Illustrator. The idea is to have a block of text with an outline round the outside of the whole text, but separated from the text characters.
In illustrator the sequence is:
Write text and select then create outlines
Then Object, Path, Outline Path.
Then using the pathfinder utility, merge the outlines into one.
In Xara Designer, I can change text to shapes, but not generate an outline other than a line that hugs each character.
I'd really like to be able to create the sparkle effect seen in the image below using Designer Pro X, but try as I may, I haven't figured out how to do this. It is a one-click effort in MediaChance's RealDraw.
The top image is the image without the sparkles; the one below it adds the sparkles, and the bottom image is just a black field on which the same sparkles are placed so you can see them without distraction.
Is there a (preferably easy) way to do this in Designer Pro X?
In Photoshop CC I get the following message "Photoshop can not find the Javascript Plug-in" when I use File>scripts>load files into stacks. In CS6 file>scripts works normally and I don't get this error message.
Is there a way to create a .avi file in Photo & Graphic Designer 7?
I want to create an animation (not an animated .gif) that I can then include in a movie. I see how to set the properties for an AVI file but when I try to export the animation, I do not see the otption to save my file as a .avi. Am I missing something or is there a better alternative for creating an animation that can be included in a movie file?
I need to create one Plugin for AutoCAD 2012. I created one plugin for AutoCAD 2007 using .NET 2.0 . I would like to know which is the correct .NET framework I should use for creating a plugin for AutoCAD 2012. For Ex. [.NET 2.0, .NET 3.5, .NET 4.0, .NET 4.5 etc] ?
If possible can I get a link to any autodesk official page detailing about the .NET frameworks ?
how to get rid of the IE plugin/BHO. This has taken over and am now unable to download dwg files. They just open to a blank screen active x control installed or not.
I am working on a graphic design project - a print publication for a client. The original Word document that is the basis for the report contains footnotes. Insofar as I am able to do so, I would like to retain my client's structure, including the footnotes. Is this feasible with P&GD 6 or version 7? I cannot find any reference to "footnote" in the help provided with my installation.
I am using autocad 2013 primarily and other employees are using 2010. I am saving my drawings as 2010 and for me there are no issues. On the other hand people using 2010 are having objects missing in the drawing. All layers are turned on and all thawed. The primary objects missing are AEC objects. Is there a switch to show or hide these object?
I have created a partial cui file that creates a new tab and a panel in the tab. This works fine.
When I try to create another cui for another plug-in I cannot get the two tabs to merge. I have set the tab Aliases to be the same but they show up as two tabs next to eachother.
I am using CS4 64 bit. I just installed Corel knockout 2 and the extra goodies from the install cd to get the exclude filter. Neither of them are visible after the install. Has anyone successfully installed these using CS4?
I just installed 2012 with the Inventor pro suite. when I tried to open multiple dwg's it locked up on certain dwg's and I got the error " no cavas click on new canvas". I read an existing post that said
"I went into the CUI, current workspace, removed the Sketchbook Designer from showing in the Ribbon"
I could not find this in my cui current workspace and is this the best solution?
win 7 64 bit sp1 cpu intel xeon E5-2687W0@3.106 eight core two solid state hard drives 32 gig of ram Autodesk product design suite premuim 2014 64bit Nvida quadro 4000 Space Pilot ver. 1.6.2 2010
If I create a text object, then copy and duplicate, how do make the width of the duplicate text smaller whilst maintaining the length of the object. I have worked out that I can use borders around text to create a smaller version however the effect is not suffice.
Effectively what I want to achieve is the 'feather' effect that reduces the width but retain the overall shape and dimension without any distortions.
I have a new 15" macbook pro, and have the set requirements to run Photoshop CS6 even after the recent updates. However, I still cannot access the "Filter Gallery", and when I went to find the so called "Filter Gallery" plugin folder--what do you know that plugin is missing all together.
I've already done the Preferences, show all plugins, etc... deal and this is not the issue here. My Filter Plugin is missing all together, and my macbook pro was purchased brand new from the Mac store, 3-4 months ago.
I have been a paying Adobe Creative Cloud member since day one, when it first became available, and now I'm over the top upset over this problem! How can I fix this missing plugin?
Today I came across with a visualization library named as processing.js. As far as i learn, to use this library we have to create a tag like "<canvas id= "processing-canvas"> </canvas>".Now, i wonder that; how can i create this element in Adobe Edge? I'm sure its possible, but how to do a little demo with processing.js in Adobe Edge.
I can't seem to remember how to do this although I am sure I have done it before. I created an image on a black canvas. Now I want to use this image as a brush but I can't seem to remember how to get rid of the black background.(I am working in PS5)
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2 'Draw a line Dim PT1(2) As Double [code].....
