3ds Max :: Zooming And Rotating With Space Pilot
Nov 16, 2012
I have an intermittent problem. I can't scientifically reproduce it. I use the Space Pilot to zoom and rotate around in my scene. Typically, it works great.
My problem is this: I have all four viewports visible. No matter what viewport I have selected, the only one that is zooming and rotating is the lower right one. My only work around is that I maximize the viewport I want to work in.
This even happens after I save the file, close the program and reopen it.
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
View 3 Replies
ADVERTISEMENT
Jan 6, 2014
using a space pilot and inventor 2014, cant rotate but the first file open, have to close first to rotate second file
inventor 2014
M6700, Nvidia K3000M, 32GB, 512 SSD
Win 7 Ultimate 64
Inventor 2014
View 3 Replies
View Related
Feb 4, 2014
I created a 3D object (a Doctor Who TARDIS) just for fun and I'm trying to figure out how to animate it spinning in space with the orbit camera and keyframes. I do the orbit and the keyframing works fine, but when I play it back the whole thing zooms in and out madly, almost like it is throbbing in and out. This funny "throbbing" happens in between the keyframes.
The zoom attribute in the camera options is actually locked, the only attributes changing as I move along the timeline are the position attributes, which I am keyframing off.
View 2 Replies
View Related
Oct 8, 2012
I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies
View Related
Jul 31, 2013
I have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set. So the viewports for the sections are rotated 90 degrees and difficult to read on the screen. Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space?
I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup. This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible. And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.
If it's not possible, then it's not the end of the world. We have AutoCAD Architecture and AutoCAD LT 2012 & 2013.
View 6 Replies
View Related
Sep 7, 2012
I am fairly new at animation. If I want to simply create an animation of an assembly just simply rotating in 3D space which I then can import in Showcase for a presentation, how would I do this in Inventor?
View 4 Replies
View Related
Jan 23, 2013
How do i rotate objects, plans...etc on model space in a view port.
View 9 Replies
View Related
Aug 28, 2013
And this is a personal project. I want to set up my 2013 Pilot with windows graphic that you can see out of from the inside. Anyways. I cant find exact dimensions to the windows, and it's angled and rounded cornered and I need figuring out a way to make a template I can use for my window design in the future, I will also need to do the rear hatch window as well.
View 4 Replies
View Related
Apr 17, 2013
I was trying to create Aircraft pilot tube using inventor and got the problem of internal tube designing in the connector section. Please see the attached files.
I am having problem designing the internal part of the end connector section where the internal tube from the probe goes up bends and connects to a tube with end connector via an accumulator. (as shown in the picture attached - Pitot.tube_abnormal.procedures-1_A300-600_Prunep.55)
View 3 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
Feb 1, 2012
after discovering zones and the space evaluation tool I wonder whether it is possible to customise the XLS output further by also reading out information from a property set attached to the space?
The office standard is to have a property set attached to each space that defines a room number (which is the level ID plus a number, say G-01), the area and the space name.
We used to simply schedule the areas with a schedule table. That only gives us net rooms, no subtotals per department (or say per flat) and no grandtotal.So we got as far as using zones grouping the spaces in each flat.
Now I need an area schedule XLT template that also displays the room number from the space's property set and the schedule grouped in a fashion that I get subtotals per flat (=my zones) in another column and a grandtotal.Playing with the Space evaluation tool I seem to only ever get Room/ zone names and their areas.
View 2 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
View 2 Replies
View Related
Dec 10, 2012
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
View 5 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Jul 13, 2012
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
View 4 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
Jul 11, 2011
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
View 8 Replies
View Related
Jan 5, 2009
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies
View Related
May 2, 2013
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies
View Related
Oct 24, 2012
I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
View 9 Replies
View Related
Apr 4, 2012
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
Jun 29, 2013
CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies
View Related
Dec 26, 2012
Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
View 5 Replies
View Related
May 15, 2010
Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
View 89 Replies
View Related
