look at the attached still (image URL link: connective tissue image ). I am trying to figure out creative ways to create the yellow vine like connective tissue strands in the still. I'm looking for a fast & render optimized solution. I don't want to sit and spend a day creating renderable splines.
View 4 RepliesI am just starting to use C3D 2013, and have just finished creating a new template for use in 2013 by importing the styles from our 2012 template. I am having an issue with an alignment style. The problem is that every line extension after the first one ends up being on the same layer as the curve (see attachment). They are supposed to be on a seprate layer as they were in our 2012 template.
View 1 Replies View RelatedI'm having no luck finding a type of vector vine corner border clip art.
View 5 Replies View RelatedI'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedFor example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedI have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies View RelatedHow do we do a break and or jog line in a section so we make things shorter? I did find the DIMJOGLINE command and that will be great for the dimensions but what about the other stuff, do we have to do that with a block or draw the thing, if that's the case what are you doing to handle this?
View 5 Replies View RelatedI cannot get pscc to access servers to download extention not even Kuler, i am trying to add on album DS
View 1 Replies View RelatedOn OS X Mountain Lion the Photoshop Extensions Sub-Menu in CC is grey when I first launch. I believe this is the same as in CS5. But I think it is non-the-less a bug, because the delay in making that window available makes it appear that MiniBridge is not available, unless I wait and then come back to the menu.
View 5 Replies View RelatedNone of my Adobe Extensions migrated. What do I do?
View 4 Replies View Relatedwhat is the difference between Photoshop CS6 and extensions?
View 3 Replies View RelatedI have purchased filter extensions for photoshop cs6 in the creative suite. they download but fail to install with the error message "failed to install. close extension manager and try again". i have tried again so many times but there are 2 that just won't load.
View 1 Replies View RelatedI have added about 30,000 extensions just to have a nice healthy choice of design options; however, now PS takes about 5 minutes to load. Since the .atn, etc. files have to be placed in the Presets area of the local installation in order to be loaded into the various palettes,
View 20 Replies View RelatedDoes anyone know any photoshop tutorials that involve extending the length of a persons hair? I've been looking all over for such a technique, but to no avail.
View 5 Replies View RelatedI have 3d Max 2012, but I can't open files with extensions .bip and .fig, How do I open it?
View 3 Replies View RelatedThe 'save as' option is now limited to .jpg and photoshop in vaious form. The only photoshop file my After Effects will accept id .psd
View 3 Replies View RelatedThis is the issue:The other day i got an error message in Photoshop saying that Generator crashed and can't start until i uninstall other 3rd party plugins and reinstall PS. So I went to Extension manager and tried removing but ended up with an "Error code: -451 can't remove extension." Huh? Okay so I went on to do this the manual way following the [URL]...
Great! Now everything s clean. I reinstall PS as asked. and Duh! Nothing changed! The extensions are still there.So I tried uninstalling again, using the adobe cleaner tool and ten reinstall. Same thing - it's still there but the generator won't work.
Ok now I'm starting to get desperate. First I uninstall EVERYTHING adobe (even flash player), use the cleaning tool and then search the harddrive for anything having to do with adobe - all adobe folders, including temp folders, all registry accounts and remved them. Then I removed all things having to do with the extensions, searched the entire hd and if found any instance i removed it.
So I redownloaded Adobe Cloud, started a new account (for safety) and started to reinstall...After launching PS I see that the generator "reflow" option is back again, great! But, what the duck?! The extensions are still there!!
So I launch Extension manager, and it's empty completely empty.How am I now supposed to update the extensions? And how do I remove them
Photoshop CC Extensions menu is greyed out. I cannot select event that menu.
The extensions installed successfully in Extension Manager CC, no errors. I even tried uninstalling and trying just 1... no dice. I've reinstalled Extension Manager CC without success as well.
A few of those extensions are scripts and those are available through the File > Scripts just fine, but the Extensions are not. I have no issue at home using them, but here on my work computer I cannot access them at all.
In Photoshop CC, I cannot even click on the Extensions menu, not even the Exchange is available which is built in:
I uninstalled and reinstalled Photoshop CC and reinstalled the plugins and I still have the same issue. No error messages, it's just not selectable.
what apart from PSB's ability to handle very large files, are the advantages of one over the other? Reason I ask is the PS Autorecover file has a PSB extension, which I guess enables the feature to handle any file size. So if it is used to recover your work, why do we need to continue to have two formats. Why not just one?
View 5 Replies View RelatedI just made a whole website design in 3 psd documents, and I went to save as on each of them, and had .psd selected. It saved, and I thought it was ok. But then I went to open it again and it had a smaller file size than I expected...and I realized it was a jpg disguised as a psd, which also when opened gave me the classic 'Cannot open..not a valid photoshop document'...but of course even the jpgs are useless to me as I had various pages on different layers, made invisible. Under normal circumstances I would accept it and start again, however I have not since closed photoshop since I began tweaking them, and thus wondered if it might at all be possible to reload the documents as they once were (they were all real .psd documents before I opened them today).
Specs:
2.8Ghz Athlon
1GB ram
ATi Radeon 9800
XP SP2
I am producing a graduation edition with hundreds of senior photos.
All the photos are cropped the same size, grayscaled and named alphabetically.
I would like to produce a contact sheet because it puts the names underneath the photo but it also includes the file extension.
Using this method is much faster than placing individual photos on the page and re-typing names.
I am using PhotoShop CS3.
i started getting this message when I try to open .psd, .ai and numerous other files. I have checked my import-export options and file formats in my plug ins folder but nothing seems to be missing. I can't figure out why this is happening. What i am having to do lately, is open them in image ready, then jump to ps. I know I end up being able to access these files -
View 9 Replies View RelatedI do not need some of the extensions for saving images.They clutter the pulldown menu and I would like to remove them. I found some of the extensions and just renamed them to some other name to block them out.However, some extensions like .SCT can not be found that way. Does anyone know how to block them in CS2 and CS4?
View 10 Replies View RelatedInstalled the latest 2.8.4 build for WIN 32 bit. This newly installed version only recognizes the .xcf file type; it will not save to, or load any of my numerous files saved as .xcf.gz
The message I get is:
The given filename does not have any known file extension. enter a known file extension or select a file format from the file format list.
The file format list only contains .xcf
I've uninstalled and reinstalled with a fresh download, with the same results.
I do not use Mental Ray at all. I am not interested in it. Ideally, I would uninstall all Mental Ray plugins but unfortunately, it seems Mental Ray classes are required by Substance.
I would love to have Preferences->mental ray-> Enable mental ray Extensions switched off by default. Unfortunately, I am unable to get this!
I have a MaxStart.max file with my basic VRay settings, VrayPhysicalCamera, Vray sun and sky system already in place. This is how I would like to start my each and every new Max scene. Unfortunately, regardless my settings, each time I restart Max, these bloody "mental ray extensions" are on again and again.
Is there any method to keep them off efficiently? So this does not return anymore?
if there is anyway to install extensions into adobe products using Extension manager without the user being prompted, I have CS6 installed.
View 1 Replies View RelatedI work in publishing and convert hundreds of jpgs into tifs each month. In CS6 under save-as when I click on format> tif, I loose the end of my file name.
Eg Figure 8.7.jpg goes to Figure 8.tif >loosing the last part of the filename.
When I have a big list of files to run through, I need the saving process to be as quick as possible without having to alter the file name manually. Why this is happening, it was fine on CS3!
I get, on attempt to go into extensions.Could not complete the Manage Extensions command because Photoshop was unable to find the JavaScript plug-in.Also some components of PS CC and InCopy could not be updated successfully.
View 1 Replies View RelatedThe problem I've been noticing for a while now has been especially in OSX, now also on windows 7 is that whenever I have a PSD file open and go SAVE AS as a JPG alot of times I tend to do a batch from a single psd with different version.. ( name01.jpg name02.jpg name03.jpg etc.)
What I came across is that sometimes I tend to forget to select JPEG from the drop down menu (because the window always displays Photoshop File as default).
What happens is that Photoshop File is in the drop down menu and I name my file Name01.jpg it saves it as a Photoshop File with a .jpg extension. which confuses everyone that tries to open that file because they cant and its huge..
I remember on windows XP when this happened photoshop was kind enough to name my file Name01.jpg.psd which made the file stand out and approprietly named.
Aside from the whole .PSD .JPG issue with this not adding the appropriate extension automatically, this also causes problems when I name a file Name01 photoshop leaves it at that and does not add any extention to it so it becomes an orphan file on foreign computers.. It doesn't happen often but when it does I want to punch my computer in the face.
I'm sure I'm not the only one saving JPGs from Photoshop in large numbers that this happened to..
I had a custom extension (a custom panel made with Adobe Configurator) installed that was working fine in CS6 (PC, both 32 and 64 bit versions) but after the update to 13.01, the extension no longer loads. I have tried reinstalling the extension but that doesn't work. I can no longer select it from the Window > Extensions menu.As it was working fine before the 13.01 update, I can only imagine it has something to do with that specific update.
View 27 Replies View Related