3ds Max :: How To Change Frames Or Values In Key Entry
Aug 5, 2011
I am animating a polygon mesh with bones using a CAT rig. Whenever I go to the Curve editor in order to change the Frames or Values in the Key Entry: Tack View, the tangent button icons start to flicker and I'm unable to type in a value with the keyboard for about 15-30 sec until the flickering stops.
Never the less the mouse functions are still given and I can manipulate the tangents manually, but it's especially frustrating when I want to set the Global or Local Weights of the CAT rig to 100% or if I want to work proper.
I have the SP1 and HF2 for 3DS 2012 installed.
System Spec:
Windows 7 Ultimate; 64 bit; SP1
Intel Core i7 950 @3.07GHz
12 GB RAM
NVIDIA GeForce GTX 470
So, I'd like to know if it's an issue with the program/version or the hardware.
View 1 Replies
ADVERTISEMENT
Dec 11, 2013
I have been attempting to automate some prompted entry (PE) values using iLogic and the SetPromptResultText command.
The command works on the customer-supplied template I have if I create a new PE called <DELETEME> - my code also works on this new PE even if I delete the "<" & ">" from either end of the string so it becomes "DELETEME".
The command doesn't work on the customer supplied fields of "PURPOSE OF ISSUE" & "PROJECT REF No" but if I add < & > to either end (so they become "<PROJECT REF No>" & "<PURPOSE OF ISSUE>" respectively) and modify my code to look for that instead, lo and behold it works.
why it works with the "<" & ">" on the ends of the string but not without?
My guess is that the "<" & ">" allow the PE to have spaces and without it Inventor 2013 throws the dummy in the dirt and refuses to play nice! - Just tested that theory and it's clearly cobblers.
Here's the sub-routine I wrote (with the working "<" & ">" still in place):
Sub UpdatePromptedEntries(oDoc As DrawingDocument)'assumes the oDoc is activatedDim oPromptEntryDim actSheet As Sheet = ThisApplication.ActiveDocument.ActiveSheet'For Each oSheet In ThisApplication.ActiveDocument.SheetsFor Each oSheet In
[code]........
View 4 Replies
View Related
Aug 20, 2010
I have used earlier versions of VS in the past with virtually no issues , last version wbeing VS11 Plus. I recently "Upgraded" to VS Pro X2 and am trying to burn my first project with it. During the share stage, trying to make a DVD I get the message "Some chapter entry frame numbers exceed the total frames" and NO I did not edit the project after adding the chapters in the share stage. Seems from google searches that this is an old issue for which Ulead issued a patch in earlier versions, but it is back! One post suggested creating a video file of the whole project then importing that without creating a new project then sharing it and adding chapters.
I tried that and found that the audio for the second half of the project got dropped. If you press Info on the DVD player it displays Dolby 3/2 on the TV screen, but the AVamp shows no Blue Dolby multichannel light and detects no audio streams available. This dropping of audio occurs at a transition between two clips in the original project. The "missing" audio is present in the mpeg file created, and you can hear it if you play the file in the "Edit" tab. It simply does not get carried over to the disc burn. I tried twice. ANyway, that is a secondary issue and I'm not too bothered about that. I would much rather get a fix for the Chapter frame numbers issue and thus avoid the video file creation process.
I have tried taking a few frames out of each clip and re-rendering the whole project again to no avail. I have also tried deselecting two pass conversion.
View 14 Replies
View Related
Jul 18, 2013
I have an attribute blocks and this att block has two tag values , is there a simple code for to change 1st tag values automaticly according to 2nd values ?
for example :
1st tag (50x50) - 2nd tag ( 100 ) ==> 50x50-100
if i enter 201 valuse to 2nd tag then 1 st tag has to change as 100x100
if i enter 501 valuse to 2nd tag then 1 st tag has to change as 150x510
I attached a jpg file for explain much better
View 9 Replies
View Related
Aug 27, 2013
How could I read / change prompted entry through code from title block (for example DIN) within VB.Net?
View 3 Replies
View Related
Jun 28, 2009
I'm running WinXP SP3. I just upgraded from CS2 to CS4 (and yes, I installed the update.
I'm currently running 11.0.1).
Whenever I load photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Adobe Photoshop CS4: Photoshop.exe - Entry Point Not Found" "The procedure entry point
Is ThreadDesktop Composited could not be located in the dynamic link library USER32.dll." After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly. No other errors, no missing functions, no lag.
I'm pretty sure getting an error during start up is a good indication that not everything is 100%.
View 6 Replies
View Related
Mar 5, 2014
How I can get the finished floor material from the floor in the room tag? The only way I know is to manually write material via Change Parameter Values in the tag.
View 2 Replies
View Related
Nov 23, 2012
CS6 & 5: Images (document frames) open in the extreme top right corner of my saved workspace, with the left margin of the image obscured by my toolbar. Is there a way to change this default so they open in a more user-friendly centralized position in the workspace?
View 5 Replies
View Related
Aug 25, 2013
I open my file (which has an embedded srgb color profile) in photoshop (my rgb values are 246/205/218). When I use the color picker, it confirms that my color is accurate. Then I save the file as a JPEG (using maximum-12, and baseline), also embedding the same srgb color profile into the photo (which is also my working space btw). Then when I reopen the JPEG file in photoshop, and use the color picker.... my srgb values are (246/205/219). The difference is so small that it doesn't make a huge difference, but why is this happening? My PSD file has of course maintained the original rgb values.
View 14 Replies
View Related
Feb 5, 2012
FLATTEN, however is not a valid command in ACA 2012.I have never used a lisp routine so I am not sure how they are used.
View 9 Replies
View Related
Oct 8, 2010
I have a complete gearbox drawing from a previous work and I would like to use it again but with different dimensions.
If I edit the dimensions and enter different values its not enough because when I hit the inquiry tab and dimension, obviously it will be the old measure value.
My question would be how to change the whole drawing to a new dimension values? I think there is no need to redone the whole gearbox again with new dimensions. My drawing is in metric (millimeters).
View 9 Replies
View Related
Sep 13, 2012
I frequently record Illustrator Actions. My actions are quite long, but they all involve three common steps:
-Assigning Notes to shapes
-Assigning Swatches to shapes
-Selecting shapes that have a specific notes
I often need to re-record my actions to repeat all the steps, but to change the notes/swatches that are selected/assigned during the action.
Illustrator has a re-record command. This command is great for changing the value of the note in number 3 of my list. However, it does not work for items 1 & 2 in my list. For these items I have to delete the old step in the action and then record a new step with the new swatch/note.
I know macros in Microsoft Office have an editor which allow you to change values in actions. Is there anything similar for Illustrator actions?You can save an Illustrator action and open it in Text Edit. However, all the attribute/swatch values are saved as weird strings, so I don't know how to change them.
View 4 Replies
View Related
Jul 16, 2013
I'm working in Photoshop CS 5.5 on a Mac, and I want to apply a specific CMYK color to a selection in an image. I create the color with the values C=0, M=100, Y=100, K=10 and add it to my color swatches. Then I select the section of the image where I want to apply the new color and fill it with the paint bucket. The color fills the section just fine and life is good. But then when I roll over the section with the eyedropper to double-check the CMYK values in the Info window, it shows that they've inexplicably shifted to C=9, M=100, Y=100, K=1.
View 4 Replies
View Related
Aug 25, 2010
I need to select various shading patterns in a section view drawing and assign all the same settings using VBasic but can not find the way to go. For example, all a 45 degree angle and scale to 0.25.
View 3 Replies
View Related
Dec 4, 2013
I have a plain rectangle with overall c09300c0 RGBA levels.I want to change the alpha channel value from c0 (193) to some other value, for the whole image at once. Or some other color channel.
How can I change the absolute value of a channel ? The color menu has only relative adjustments.
View 1 Replies
View Related
Feb 20, 2012
it's possible to do a "global change" (values) to Attributes in MText?
I'm using 2010.
Those MText attributes are practical but a pain in the neck for my existing tools!
View 0 Replies
View Related
Jun 2, 2011
The Question: Can Visibility States be changed by an Attribute Value instead of the drop down arrow?
The Situation: I am building an annotative block that the user wants to change appearance (ie different hatches inside a circle) based on an attribute value (1,2 or 3). The attribute is invisible and is one of +/-40 other attributes. I can change the appearance with visibility states and the little pull-down arrow on the block or the properties menu, but the user wants to be able to change it with attribute value. Is this even possible?
View 4 Replies
View Related
Sep 27, 2013
I read in autocad help that these are saved in the registry. I'd like to change their values via registry instead of using acaddoc file. Where can I locate these in the registry? Could not find them...
View 5 Replies
View Related
Jul 9, 2011
I am trying out my new cam which can do video in 24p (23.something), and I can edit the clips, all ok. There are just two things I cannot do: Make a still (it's really the 24p material, I used a clip in 60i and stills worked), and changing the time/frame counter to 24 frames. No matter what I do, it will always stay there.
View 6 Replies
View Related
Mar 3, 2013
Okay my script to change text frame color changes the color of all text frames hidden or not.
I need it to only change visible text frames.
if ( app.documents.length > 0 ) {
newCMYKColor = new CMYKColor();
newCMYKColor.black = 0;
newCMYKColor.cyan = 0;
newCMYKColor.magenta = 0;
newCMYKColor.yellow = 0;
[Code]...
How to go about making it only change the color of text frames on the active layer? In the final script I will hide all other layers so if it could be done by a visible attribute more easily that would work just as well.
View 4 Replies
View Related
May 3, 2012
Contour.jpg
Would like to have it default to 'Outside contour' mode and have the value changed to a smaller more manageable value.
View 9 Replies
View Related
Jun 17, 2012
I need to change the value of some tags in a title block on multiple drawings. I tried using Lee Macs attribute changer [URL]. It works fine but not when tags have the same name.
I then looked at this code - [URL]
Idea was to change the tag names then use Lee Macs program. It too fails when there are duplicate tag names. It changes all tags not just the one I want.
In the the title block I have 3 tags with the name "NAME" but only one will have the value I'm looking to change. If I could place an IF statement some where in the above codes (or another code altogether) to instruct that IF the tag name is "NAME" with value "Dennis (BSL)" then change either the tag name or the value to "Daniel"
Im pretty bad at this programming stuff but with so many drawings I need a easier, automated way of doing this.
View 1 Replies
View Related
Mar 27, 2012
I am trying to create different bend tables for different thickness material. If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value. The values of the bend table are dependent on the thickness of the material. Why can't I have several different thicknesses with the same radii?
View 1 Replies
View Related
Jan 18, 2014
I've had this problem before, and it randomly popped up again today.
This time restarting Ai fixed the issue the first time. I just don't know if this was human-error/setting on my end, or a minor bug to report.
So I create a CMYK Ai doc. Create some black text and/or shapes. Then decide to change color to rich black by manually entering CMYK values (in this case, 60, 40, 40, 90), select ok. However, the colors revert back to original percentages (75, 68, 67, 90).
In past versions, it's happened once or twice, and restarting Ai didn't solve the first time.
View 6 Replies
View Related
Apr 15, 2013
why change the CMYK values of a color when converting to spot color in a color chart
xmp C 0 M 90 Y 100 K 0
to C0 M 87 Y 89 K 0
View 1 Replies
View Related
Mar 15, 2013
I'm trying to show, using the eyedropper tool, the actual values of pixels in an 8-bit grayscale image (Mode command confirms that's what's there). In the Info panel, the eyedropper tool displays percentages for every type of color information (K, CMYK), while the "8-bit" field remains blank.
View 9 Replies
View Related
Apr 18, 2013
Is there a way to have no layer value set for the description keys. I set all the layers, and now I realize I'd rather set this to no layers (boxes are all unchecked). I'd rather see no value under the layer column, but there doesn't seem like a way to set this.
View 1 Replies
View Related
Dec 21, 2012
Can AUTOCAD sum values that are entered as text values? Attached is a table text whose right final values should be all sumed up? Is this possible inside AUTOCAD?
View 9 Replies
View Related
Mar 7, 2013
I cannot find the menu from where to change the timeline mode.
View 10 Replies
View Related
Jun 6, 2012
I am no longer able to open any image file (psd, jpg, tiff). When I double click one or right click and File>Open with, I get the following error msg:
Photoshop.exe - Entry Point Not Found
The procedure entry point ?getA3@LiveBase ScCore@@UEAAPEAXH@Z could not be located in the dynamic link library ScCore.dll.
The significant event that occurred a few minutes early Windows crashed when I tried to put it to sleep. Photoshop and several other apps were open at the time but CS6 is now not functioning and I expect that it did not like the abnormal shut down.
View 2 Replies
View Related
Mar 30, 2014
I am using ID CS5.5 on Win 7 pro.
I have a booked series of documents. So far, the table of contents entries have been behaving themselve... until today.
The very next entries are for the "Enertek Family Groups" with two entries (so far). Those are the Initiator Family and the Strong ARM family. These are on pages 153-155.
Why are these entries, which are in the previous section "Patriarchal Family Groups", out of order here? I checked the page numbers and they are correct. The Enertek entries DO occur before the Prototypical families.
View 6 Replies
View Related
