3ds Max :: How COM Center Of Mass Calculated In Measure Utility
Jan 19, 2012How the COM center of mass is calculated in the measure utility?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: How Mass Moment Of Inertia (kgcm2) Calculated
Jul 10, 2012How the mass moment of inertia (kgcm2) is calculated in inventor?
It says it is calculated using negative integral, however i dont find this very informative.
I used the data for a report, and need to justify how i got the center of gravity and inertia properties.
A formula, method or algorithm would be nice.
AutoCad :: Find Center Of Mass For Arc?
Sep 9, 2013I am wondering is there a command that can let me find the center of mass for a linear object.
In particular I need to find the center of mass for an arc.
AutoCAD Inventor :: Center Of Mass / Gravity Location
Oct 21, 2011How can see visually the center mass of a part or assembly?
When I'm checking in the Iprop., I see the center of gravity coordinates, but it there a way to "see" it (some visual representation)
Inventor 2012 Pro.
I7 workstation
AutoCAD Inventor :: How To Obtain Center Of Mass Of More Than One Subassemby
Apr 18, 2013We want to obtain the center of mass of two or more subassemblies within an assembly. How to do it? The subassemblies may or may not be connected to each other directly.
View 9 Replies View RelatedAutoCAD .NET :: Mass Properties Center Point Of Gravity Coming Out Incorrect
Jul 19, 2012I have tried just about everything and the mass properties center point of gravity is coming out incorrect.
I have created a box 300x300x300 with the center of the box at 0,0,0 (for testing the cg) . The result I get is not 0,0,0 one of the values always comes out to be not zero, depending on the orientation of the box. Is this a bug?
Dim cg As Point3d = T.MassProperties.CentroidMsgBox(cg.X & vbCr & cg.Y & vbCr & cg.Z)
GIMP :: Measure Tool - How To Make Size Of Center Of Cross Larger
Nov 21, 2012When I use the measure tool for the ruler an open centered cross is displayed - is there any way to make the size of the centre of the cross larger? this way i can get a more accurate measure of 2 points -
View 2 Replies View RelatedAutoCAD Inventor :: How To Show And Measure From The Center Of Gravity Symbol In Parts And Drawings
Dec 27, 2013In the iProperties, in the Mass properties are the coordinates of the center of gravity. i guess they relate to the center point and axes in the main origin folder, right?
How can i show and measure from the genter of gravity symbol in parts and drawings?
AutoCAD Inventor :: Remove Iproperty Mass Unit String From Mass Value In Text String?
Oct 3, 2011I've been looking for a solution to remove the unit string ie Lbs, g, kg from the value given from a 'Mass' value in a text string.
As you may all know, creating text and having a 'physical property - mass' value...the unit string is there...
Lots of people on here have the problem...no-one has got a solution.
Until now...
Basically...open the part you need to get the mass property of in your text string.
Follow the instructions on this webpage...this is the first part...
[URL]
Basically, this creates a Mass property value in the parameters table that you can call on as a text parameter.
It's similar to the custom iproperty model - mass but NOT the same.
Once you have done this, you can go to the drawing of the part and create a text string in the drawing and call it up as shown in this procedure. BUT it still has the unit string.
Here's the best bit that you want to know...
To get RID of the unit string...open up the part again from the drawing...click on the parameter icon...find the user parameter...in the Nominal value column, right click on the value and you get a pop-up that gives you 3 options...
Custom Property Format, Make Multi Value & Delete Parameter.
Click on Custom Property Format.
The pop-up window comes up...showing you the property type...in my case...the 4 left columns read Text, g (grams), Format & Precision...
On the right hand side I have a Preview of the text...then 3 check boxes...Units string, Leading Zero's, Trailing Zero's.
Units string is checked.
Uncheck it.
Close it...Save your part...go back to the drawing and hey presto!...the text now shows the weight you require as a straight value...no units!
AutoCAD Civil 3D :: How R Is Calculated
Jul 28, 2013How R is calculated in the C3D?
I’m wondering regarding the equation used to calculate the radius of the circular curve. Is it the one attached? How the horizontal curve is updated as the design speed is changed?Ja
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Revit :: How To Create A Calculated Value
Aug 28, 2013I'm trying to input the price for the number of fixtures in my schedule. I added "count" in the fields. However, when I try to create a calculated value, I dont see "count" to be inputted into the formula. Why wouldnt "count" be listed for the formula??
View 5 Replies View RelatedLightroom :: Converting NEF / XMP To DNG Using Utility?
Jun 29, 2012I am using the stand alone utility for converting NEF to DNG
Will it combine the NEF & XMP together in the DNG using the utlity or does only lightroom do that?When I import pictures from a camera and have keywords attached to it, are they stores in the NEF or XMP? Eg If I were to add the pictures to a new catalog, would the same keywords be applied?
Photoshop :: How Pixel Dimensions Calculated
Oct 15, 2013In this panel the pixel dimensions show is 4,50M . I would like to know How the "Pixel Dimensions" is calculate ? This 4,50M confuse me because my file size is 1,2M.
View 5 Replies View RelatedPhotoshop :: Name Of File Conversion Utility
May 9, 2006Someone mentioned a utility (maybe a ps plug-in?) that some guy made that will mass convert files from one type to another etc.
View 3 Replies View RelatedGIMP :: How White Balance Is Calculated
Jul 10, 2013I would like to know how the white balance is calculated on GIMP.
View 3 Replies View RelatedRevit :: Calculated Value Plot Ratio
Dec 13, 2013I created calculated value Plot Ratio (Gross Floor Area/Site Area = Plot Ratio) but it come out result is "0". Any reason why it didnt calculted properly or what is the correct formula to achieve the coreect answers?
Please see Attached.
Revit :: Calculated Wall Type U-Value?
Dec 18, 2013We usually run our own calculations for U Values using the BRE Calculator (UK Building Research Establishment).
I just carried out an experiment to check the value that appears in the Revit properties of a wall type (Heat Transfer Coefficient - U) for a given wall build up.
The result in Revit does not seem to correlate with the value that our calculator generates.
I have checked through the conductivity values for the materials (under thermal properties) - and using the exact same values the Revit generated figure is far more optimistic.
For a typical cavity wall construction:
Brick (102mm) @ 0.54 W/mK
Cavity/air gap (40mm)
Insulation (60mm) @ 0.020 W/mK
Block CME (100mm) @ 0.51 W/mK
Plaster (12..5mm) @ 0.51 W/mK
The value that appears in the Wall Properties Dialogue box (greyed out - so I assume it is a calculated value) is 0.1935 W/m2K
Our BRE calculation generates a figure of 0.268 W/m2K.
The insulation manufacturer claims around 0.25 W/m2K for the given wall build up.
how we could have such a discrepency ? All the conductivity values are correct for the materials used in the wall build up.
I am beginning to wonder whethe the value in the Wall Type isn't a U-Value, although the units are consistent with it (W/m2K)
AutoCAD LT :: Use Portable License Utility
Nov 14, 2013Do I need to use the portable license utility to uninstall and then reinstall a single user AutoCAD LT 2009 permanently from one laptop to another? If so do I select "computers" then "remove"?
View 1 Replies View RelatedXara :: 32-bit Memory Limit Removal Utility
Nov 18, 2009I recently came across a particularly magical piece of software located here for free. It allows 32-bit programs to address more than 2 GB of memory. It may only work for 64-bit systems though, not sure (i.e. those with CPUs that can work on 64-bit OSs).
I mention this because Xara sometimes crashes with out of memory errors, such as when making large panoramas or doing something else that consumes GBs of memory. By using this utility on the Xara exe to allow it to address more memory than normal, the crashes can stop. This also applies to any other memory intensive software that shows similar behaviour, and makes them much more stable.
The instructions for using the utility to modify exes is below:
MAKE SURE YOU DO A BACKUP COPY OF THE xtreme.exe FILE BEFORE CHANGING IT JUST IN CASE YOU GET INTO TROUBLE
open the program
goto file > open
then find the exe file... in this case it would be xtreme.exe in ./program files/xara/...
On the left side you'll see "NT HEADER".... "DOS HEADER"... etc Highlight "FILE HEADER" under "NT HEADER" On the right side you'll see a chart and in the bottom right corner you will see "CLICK HERE" Click on that and a check box menu system will open. Scroll down the menu list until you see "app can handle > than 2gig address space" and check that. Save the file and close.
3ds Max :: License Transfer Utility Export Error
Jul 21, 2012I've reinstalled my OS (WindowsXP SP3) and installed 3ds Max 2012 again. It have run succesful. But it doesn't export license. While trying to export it says "Export Request Failed. The maximum number of exports for this serial number has been reached. You may not export more licenses than you have purchased. Error reference:36" It seems as my old licence is on server.
View 4 Replies View RelatedAutoCAD 2010 :: How To Have Percentage Format (%) For Calculated Value
Mar 2, 2012(Again) how to have the percentage format (%) for the calculated value?I calculated the percentage of each area in proportion to the total area. I wanted to show the percentage area in the “%” format. But sounds not to work!
View 9 Replies View RelatedAutoCAD LT :: License Transfer Utility Missing?
Jun 20, 2012I have a client working with AutoCAD 2011 (I believe) that is trying to transfer the license to another computer... But on the other computer the license transfer utility is not there... What would cause that?
View 3 Replies View RelatedVideoStudio :: X5 Ultimate Unspecified Error - Clean Up Utility
Apr 9, 2012I am trying to install Windows Cleanup Utility from the following link to cure an unspecified error due to a temp file in the hope of stopping this happening again.I have done a disc clean up and deleted temp files manually. ftp://ftp.corel.com/pub/Installer/MSICleanup.exe This does not work……”.problem loading page “ Is there another working link to access this ?
View 7 Replies View RelatedAutoCAD Inventor :: Parameters Not Calculated - Can't Rebuild With UI Or ILogic
Mar 8, 2012In the attached file there is a User Parameter, "Antal_ledekasser". Inventor has calculated its value to 2.
If you do the math by hand then you see the value should be 5.
Rebuild doesn't force recalculation.
There is an iLogic rule in the part, but this also fails to force recalculation:
iLogicVb.UpdateWhenDone=True
InventorVb.DocumentUpdate()
ThisDoc.Document.Rebuild2
ThisDoc.Document.Update2
Manual work around is to change the formula, then the value is recalculated.
iLogic work around is to change a parameter-value - and run the rule TWICE.
Question: How do I force a real rebuild, that actually wil recalculate parameter-values the first time I run the iLogic rule?
Background: The attached file is a little subset of the skeleton in a large assembly that is controlled by iLogic. The rules are placed in the topassembly, and writes vaules to the skeleton-file.
After writing values to skeleton-parameters I try to force them through with this iLogic
RuleParametersOutput()
InventorVb.DocumentUpdate()
iLogicVb.RunRule("Skeleton", "Update")
Later in the process I use calculated values to decide which components should be active. But my logic fails because my decisions are made on faulty values.
I did manage to get the updating work in 2011. But after migrating to 2012, it seems impossible to have it update correct. The user has to run rules several times, and doing manually updates to get a correct model.
AutoCAD Civil 3D :: Show Utility Crossings In Profile
Dec 6, 2010I am laying out a pressure sewer. I have defined an alignment and profile for the route. I want to show the utility crossings (electric, gas, water, etc.) in plan and profile. My thinking is to create a block and snap it to the crossing in plan view, drape it on EG and lower it by the assumed depth and then project the block to the profile view. I have this working. Now I need to label the plan view XING's with station and utility type and label the profile XING's with station, elevation and utility type. I could easily do this with station and profile labels, but as the desgin evolves, the alignment is subject to change and the crossings will need to be moved and updated. It would be nice to have the labels and symbols integrated into a single entity that updates when moved to the new location. Is there a way to do this with styles?
View 9 Replies View RelatedAutoCAD 2013 :: License Transfer Utility (LTU) Does Not Open?
Apr 26, 2013I've downloaded and installed AutoCAD 2014 using one of our subscription licenses in order to review it before putting it on other machines (for the purpose of bug-checking and trying out new features). I also have a Map3D subscription license for which Autodesk offered me a free trial upgrade (for this subscription term) to Infrastructure Design Suite (IDS).
While going through the steps for installing IDS, I noticed that the IDS license includes a copy of AutoCAD. I cancelled it before installation and tried to use the LTU to export my current 2014 license. However, when I try to open the LTU, the Windows working icon spins for a bit then nothing happens. It works for my 2013 license but not 2014.
AutoCAD 2013 :: PLC I/O Utility Parallel Devices / Same Rung
Nov 14, 2013I was wondering if there was a way to import devices on the same rung but in parallel. In addition, maybe even sereral devices going into another (ex: 3 phase motor).
View 3 Replies View RelatedAutoCAD 2010 :: Can't Install Network License Utility
Aug 7, 2012I've installed the LM Tools license manager on a network server to distribute out floating license of AutoCAD 2010. The network license currently has 5 floating licenses for AutoCAD 2010. When I try and install the AutoCAD 2010 software on a client machine and go under "Install Tools and Utilities" I expect to see a choice for the Network License Activation Utility. Unfortunately all I get is the options to install the License Manager (LM Tools), CAD Manager Tools, and SAMreport-Lite. Nothing indicating an Activation Utility.
I may just be very oblivious but I'm not sure how to activate the program with the license server when I can't install the utility to do so. Am I missing a step somewhere? I have a feeling the answer is very obvious but I unfortunately can't see it. The SN and Product Key are entered correctly and should reflect the type of license(s) they are.
AutoCAD 2010 :: License Transfer Utility Not Working
May 1, 2012I am trying to export my license so i can work from home but the utility isn't working.
I always get that message:
License Export Confirmation
Product: AutoCAD 2010
Serial number: 351-XXXXXXX
Export Request Failed
The serial number you entered is not valid. Try again. (1)
Click the "Try Again" link to resubmit the request.
Try again
Error reference:1
The number is the right one and it didn't create any error when installing...
Why does AutoDesk doesn't want me to work from home?
Revit :: Why No Values Where Calculated For Field Material As Paint
Oct 25, 2012Material takeoff: As paint and other related calculations
I’m wondering why no values where calculated for the field “Material: as paint”! As for the “area” and “volume” calculation, they sound to be false, for example, the area of plaster board should be 0.02*1.84 but not 0.32*1.84! What might be false there?
Softimage :: When Use Get Data Node In ICE To Get Object Velocity - Not Calculated
Jun 5, 2013When i use Get Data node in ICE for get Object Velocity, it not calculated. In help specified that velocity calculation is automatic for ICE. With velocity calculation turned on in object properties on tab Global Transform - only acceleration is computed, velocity is zero.
View 2 Replies View Related