3ds Max :: Linked AutoCAD Linework Has Too Many Vertices
Jan 9, 2013
I'm having an issue whenever I link an AutoCAD dwg. I model everything in Max but use AutoCAD line-work as a guide. As of Max 2013, when I do this, I notice that every line linked is divided into six segments. I tried re-loading the linked file setting curve steps to "0" but still no change.
The linking goes well, no problems at all neither at first nor at re-loading time, but it is quite annoying to have all these extra vertices when I'm modelling over the CAD lines.
View 1 Replies
ADVERTISEMENT
Oct 22, 2013
I am having trouble with the linework reading properly. I link a CAD dwg. to my revit model and once its in my model the linework doesnt read as it does in autocad. I have dashed or hidden lines in my CAD plan and once I link it in revit they show up as solid. I am thinking it has something to do with the LTscale in autocad?
View 3 Replies
View Related
Jan 25, 2014
My designer has created an Illustrator file on his Mac that has linked images. When he sends me the all the files and I open the ai file in Illustrator CC on my Windows PC, I need to re-link the images. One image can't be found at all.
However, if I open the file in CS4 it finds the linked files no problem.
Is this some bug in Illustrator CC for Windows?
View 3 Replies
View Related
Mar 11, 2013
I found an old thread from 2011 about the same problem and the mod reported it to the devs, but as far as I know no solution has ever been offered.(maybe in cs6? we are still using cs5)For one or two layers it's no problem to do it manually, but with say 40 layers with corresponding linked layers we need a better solution.
View 4 Replies
View Related
Nov 7, 2012
Some of my linework is not plotting. This only happens on one of my .dwg files (that I can tell), and only on certain layers. Recently drawn linework only on a few layers simply does not show up on preview or on hard copy, regardless of which printer I print to or which configuration I use. It's not a computer issue because the same issue happens if I open the file on a different computer. All layers are thawed, on and set to print.
However, if I Xref the file into a new drawing, then the linework prints. Here is a copy of the error message I receive.
Job: - Error(s) Did Not Plot
Job ID: 1
Sheet set name:
Date and time started: 11/7/2012 10:27:57 AM
Date and time completed: 11/7/2012 10:27:59 AM
UserID:
Profile ID: <<Unnamed Profile>>
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: - Error(s) Did Not Plot
File: C:Documents and SettingsAdministratorMy DocumentsMy DocumentsProjectsArlington 360 12-03Design12.11.06.Landscape.dwg
Category name:
Page setup:
Device name: Canon iPF710.pc3
Plot file path:
Paper size: Letter(8.5"x11")
ERROR: Graphics Not Generated
View 3 Replies
View Related
Sep 24, 2013
I could download a .shp file that contains the section linework for indiana in state plane Coordinates? I am not looking for perfect coordinates, just graphically pleasing. I would like to start a database of the section corners we have recovered and I think it would be neat to have the whole state.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 3 Replies
View Related
Jul 18, 2013
I currently use Leica Viva Smartworks for surveying and it captures the linework codes in its own field, so when I export my CSV file my Descrition comes on with the feature code but the linework code is another field. Is their a way that using the Format field in the description Key that I can get the Full description field to read something like "V-DOMW-PIPE B", which would pull the feature code from the raw descrition field and the begin line code from the Linework field.
View 5 Replies
View Related
Jul 24, 2012
I am currently using a FBK to run my auto-linework. I am having a problem generating curves, closing lines, etc... Everything works fine unitl I hit a curve or try to close a line. I have tried many different point code variations and the only one that worked on curves was a "BC1 BC, BC1 EC". Problem is I need multiple points on a curve to pick up laydowns, PVI's, etc... I tried the "OC", no "OC".......just about every variation I could think of to no avail. Is there an alternative to a FBK that works better?
View 9 Replies
View Related
Aug 30, 2012
I received a 3D drawing but only need linework from it. I have flattened it out so I am able to export the linework. The problem is when I import the drawing into another software (Trimble Business Center), the lines are still 3D face and am not able to treat it like linework. Is there a way to convert a 3D face into line or polyline in C3D?
View 6 Replies
View Related
Sep 22, 2011
I have been trying to print to my local windows printer (monochrome laser) and to a pdf file but cannot seem to get all of my lines black. Different colors, by layers, produce a greyscale arrangement of linework. I have tried changing the plotstyles to the various available plotstyles: Monochrome.stb, Monochrome.ctb and Autodesk-MONO.stb, but have not had any success. All are printing the same.
Ideally I would like to set most linework to black and be able to have shaded areas and some linework in a grey tone when needed.
View 8 Replies
View Related
Jan 14, 2013
What's the best workflow to extract the linework from a corridor - I need the linework as 3D polys for export to another modelling system?I have tried the extract feature line from corridor but it is incredibly tedious so I have lately done the following
1 Rebuild Corridors and Save file.
2 Select Corridor, Isolate and Explode twice.
3 Select all the lines and JOIN which then creates 3D polylines.
4 Wblock the 3D polylines.
5. DO NOT RESAVE...!!!
Is there a better way?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 7 Replies
View Related
Aug 14, 2008
I have a user in ACA 2009 whose cursor is literally sticking to everything in the drawing. When she moves over any linework, the cursor pauses momentarily. Is this a setting somewhere, or another issue all together?
View 9 Replies
View Related
Mar 13, 2013
Any way to generate liework with point numbers. I have survey data of a pipeline and all the points are in order, if there was just a way for linework to connect them by increasing point number in my drawing?
View 3 Replies
View Related
Feb 7, 2012
All I want to do is trace on top of an x-ref elevation. The x ref hides all my new lines so I cannot see what I've just drawn. Even the display order has no effect, not that I want to use the display order every time I draw a line. I just want my new black lines to show up on top of the faded xref image.
View 4 Replies
View Related
Jun 8, 2011
I'm working with Architecture 2011 and when I draw a 2D section, the defining line is missing for the structural members cut by the section. The hatching displays fine but the line around the material isn't there.
Under the material definitions I've got the 2d section / elevation linework turned on and under the elevation style I've got the defining line turned on and set to by material.
The defining line will come on if I turn on the inner and outer shrinkwrap but then it's color is defined either by layer or by color in which case it's all the same color and i have to manually edit the linework to change the color.
View 1 Replies
View Related
Apr 22, 2013
We are using the linework coding to process our figures and the survey .txt file provided to me uses codes to begin lines with "+" & "-". For example, driveways are coded + DR1 for begin and - DR1 to end the line. The linework process works fine, its when I go to display the point in the description keys that are causing me problems. All the points that are in between the begin and end points display to the appropriate style because they are coded as DR*. The begin and end do not display correctly as the + & - isn't being recognized in the description key. I tried many alternate ways such as *DR*, + DR*, - DR*, with nothing working.
Is there a different format I need to be using? There are way to many points to go thru to move the + & - behind the code.
View 7 Replies
View Related
Jul 10, 2012
I am wanting to either render of hatch some linework. I'm wanting to make the ring red around the outside and grey on the inside ideally.
When I try this though,it keeps prompting me that the object isn't one the same plane, or something along those lines.
I've attached the drawing file I am talking about, and its 2013 format.
View 1 Replies
View Related
Dec 13, 2011
We are now working in civil 3D 2011, and have started using the .txt files now instead of the fieldbooks of the past. I have created a Description key set, along with a figure prefix database and a linework code set. everything works fine as long as the field crews use EP1, EP,2 EP3, ETC.. But we would really like to utilize the Begin and End function of this. I have unchecked the box that says Automatic begin on figure prefix match, but still no luck. I have also checked the linework code set and it all looks good <Space> delimiter etc..
View 9 Replies
View Related
May 23, 2013
Using 2013 C3D. My text and linework is now gray. During opening/initializing of drawing, everything appear fine until it finishes loading, then everything is gray. It just started yesterday when I was bringing in shp files of wetlands in various ways (dragging/dropping, fdo conect and mapimport). Maybe the shp file had nothing to do with it, but I've never seen cad do this.
When I grip the line, the color in layer comes up as correct color, but the line on screen is gray. Also if I copy the multileader or line, the color reverts back to correct color until I save, exit and reopen. BTW - the only thing that isn't gray is my civil 3d pipes and structures.
why everything is turning gray??
View 5 Replies
View Related
May 8, 2012
I have created a MANHOLE UDP which defines inverts in & out etc as well pipe types and sizes. Is there a way to automatically generate a polyline or feature line which picks up the invertout to invert in of the next manhole by point number? hope that makes sense! I am using Civil3D 2012.
View 1 Replies
View Related
May 28, 2013
I have a drawing that has room spaces & tags attached to them. I can not figure out why there is an arc leading from the room tag to the space it is attached to. When I detach the room tag from the space, it disappears, but when I re-attach it, the arc from the tag to the space appears. How do you turn it off? I copied the space style from another file to over-write this one thru style manager, no luck...
View 2 Replies
View Related
Mar 11, 2013
The normal color scheme for xref'd entites is the color gray. Is there a way to change them so that the linework can be more distinguishable? With everything being gray, it is hard to differentiate between contour lines and feature lines.
View 5 Replies
View Related
Nov 14, 2013
ACA 2011
So, I extract elevations from my model. No prob. Works perfectly. I then often edit linework to change some linework colors...works fine. However, What if I want to change/edit a Hatch? When I click on 'Edit Linework', the hatch automatically turns off to allow me to edit the linework... Can one edit the Hatching?
View 4 Replies
View Related
Sep 12, 2013
See attachments. See the green linework in each plan that is skipping across the corridor. These are two different projects. I have seen this numerous times but have not found a solution or even what is causing the problem.
View 1 Replies
View Related
Nov 1, 2012
To simply put it, I am grabbing linework from a dwg and copying it from base point 0,0,0. in the drawing that I want to copy it into, I hit ctrl+v and type 0,0,0 to put it exactly where it needs to be.
For some reason, that I cannot figure out, the 0,0,0 point in the two drawings are different...so I have to zoom extents and hunt for it 10,000feet away in model space. But that is not the main problem because I can always find it and move it where it needs to be.
The main problem is that when I move the copied linework over the previous linework that needs updated, it has been rotated like 3 - 4 degrees. That, or my base file's linework has been rotated 3 - 4 degrees - which doesn;t make sense because my base files linework is made up of xref's!
All drawings are set to UCS World.
Is there a way to make the 0,0,0 points the same location in both my base file and all the xrefs? My base file is not completely vertical when the xref dwg is...is there a setting that my base file has for xref's that is rotating them 3 - 4 degrees?
View 1 Replies
View Related
Oct 28, 2013
PDF linework some is missing in PDF yet shows in autocad plot... I beleive xref has something to do with it but cant seem to get it.
View 2 Replies
View Related
Apr 23, 2012
I'm trying to consolidate a lot of the linework onto a couple of layers that I will be importing into SketchUp. So what I did was created a new layer (Base), turned on all of the layers with the linework that I wanted to move onto that layer, highlighted the linework, right-clicked and opened "Properties," and changed the layer option to Base.
Now, when I check the properties on the linework, it says that it is all on the Base layer. However, when I turn on or off or export the Base layer, it doesn't affect all of the linework, but when I manipulate the layers that the linework was originally on, it does.
In other words, if you look at the objects' Properties, it says they are all on the layer I want them to be on. However, when I try to work with that layer, it does not affect the linework that I want to be in that layer.
View 2 Replies
View Related
Dec 5, 2012
Years ago someone at our firm created his own dimension tick block because he didn't like how thin AutoCAD's built-in tick was. I would agree with him, but I've found using our own tick block creates these really odd additional lines along the dimension line when at smaller dimensions -- I have a feeling the lines are inserted for some reason when the dimension text gets too close to the extension lines. In the following image and in the enclosed DWG, you can see what I mean:
At the bottom left is the tick block on its own. Above that a typical dimension, which looks fine. To the right of that you see the additional length added to the dimension line. And then the next 2 just show some more examples: the lines disappear when I go to 3'-2" but reappear at 2'-11" which is what led me to believe it was due to the proximity of the text to the lines.
Above all that I exploded a dimension and moved the components away from each other: there is a line added to the end of the block and that line does not show up at all in the 3'-3" dimension.
how to suppress these and why they are added in only when the text gets close to the linework?
Edit: the picture I originally attached was missing the exploded block -- replaced with a better image here. db
View 5 Replies
View Related
Nov 25, 2013
I imported survey data and had auto lines drawn. then I rotated my points/nodes. -- how do i get my linework to update?
View 4 Replies
View Related
Aug 8, 2013
I have imported surveydata into the survey database from FBK and processed linework. I do as many edits to my figures as I can by editing point codes and processing linework, then I fix the rest of the figures manually editing them and pushing the changes back to the survey database.
Once you have started manually editing figures you can no longer 'process linework' as you get double ups of figures you manually edited.
My issue is that I have made some adjustments to some of my control point coordinates after manually editing figures, so that all my survey points move. I try to update the survey figures so that they move with my points but Civil3D tells me that it cant update them because they were made by processing linework.
Is there anyway I can get my figures to match my points without reprocessing linework and then making all the manual edits again or exporting an FBK from the database, remove the figures and points from the dwg, reset the network and import the new FBK?
We should be able to update figures without processing linework, even if that was how the figures were originally made!
Civil3D 2014 - Windows7 64bit
View 6 Replies
View Related
Apr 11, 2012
What would cause Osnaps to stop working on 2D section linework?
View 1 Replies
View Related
