3ds Max :: Animation With Google Map
Oct 31, 2011
I've seen a lot of architectural animations that start with the "intro" of the Google map or earth that shows the location of the site, and then fly through to it and start the animation of the building.
How do you achieve something like this? I guess you can't do everything in the Max but with softwares like Adobe Premiere Pro, is that correct?
View 2 Replies
ADVERTISEMENT
May 8, 2012
I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
Any way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
View 5 Replies
View Related
May 8, 2012
I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
View 1 Replies
View Related
Mar 23, 2008
I have PSCS3 Extended and have downloaded and installed the Google 3D Warehouse plugin. I can access the plugin which takes me to the Google 3D website and I can navigate to and download 3D models. However, when the model is actually brought into Photoshop, it looks very strange. The model is only visible in fixed shape area that appears to be the shape of the initial 3d model. But when I rotate and move the model, it simply slides the view of the image inside the fixed shape area. Very strange. I've tried this with about 8 different downloaded KMZ (Google Earth 4) models and they all do this same strange behavior. Additionally, I downloaded Google's free SketchUp program. The models load and appear fine in that program. I've exported from that program, but the files still have the same problem when loaded up into Photoshop.
View 3 Replies
View Related
Apr 11, 2011
I'm trying to load the Google Earth Extension in AutoCAD Map 3D 2011 on a 32 bit machine (XP)
I keep getting this error in Map: Import GE Image unknown command.
Demandload is set to 3. I have loaded the Google Earth.cuix. I have added it the support file search path.
We have it loaded on many machines that are 64 bit and have no problems. Is there something I have to do with the 32 bit machine?
View 3 Replies
View Related
Dec 27, 2013
how do i get a border on a google map
View 2 Replies
View Related
Aug 29, 2013
I have Google Earth screen shot saved as a .jpg. I would like to set the scale. I know it will be crude. I have a tractor trailer that is 8.6 ft wide in the image. I'm trying to get a rough scale to add in a turf area to show folks what it will look like.
View 8 Replies
View Related
May 16, 2012
What happened with Google Earth extension? I cannot find it in labs. I've installed Map2012 on new laptop and I'm sure I had Google Earth plug in on the old one.
with where do I find GE for Map 2012?
View 6 Replies
View Related
Feb 21, 2011
When I look at the LatLong choices while in the "Select Global Coordinate System", I see a longer list than I expected. Which of these choices is most consistent with the Latitude and Longitude system Google Maps uses?
View 1 Replies
View Related
Mar 22, 2012
So I missed getting the extension by a day and every where I look for it just points back to the labs where it is no longer available. I used Autodesk CAD and REVIT full design suites 2012.
View 3 Replies
View Related
May 9, 2012
Months back I did this project with multiple surfaces and exported them to Google Earth with no problem. Today, I'm trying to update a surface with some changes. After the changes, I tried to re-export it to Google Earth, but for some reason it's coming in really small. I have my units and zones set to what they have always been.The surface is highlighted in yellow, but it should take up roughly the size of the red circle.
View 3 Replies
View Related
May 21, 2013
Is this a Windows 8 issue or an Autocad issue? I mean this thing crashes at random. Its not like I'm runnign a lot...1 version of autocad....no other programs other than google chrome...We have a lot of macs runnign LT I think 2013 with no issues.
View 9 Replies
View Related
Apr 15, 2013
Does max have an import plug in for Google Sketchup files?
View 3 Replies
View Related
Mar 27, 2012
I am using AutoCAD LT 2010 and I am wondering how I can upload from my dwg file onto Google Earth? We do have one user at work who has a drawing that we believe was uploaded onto Google Earth from AutoCAD but it appears it is loaded onto Google Earth using a KMZ file. Would I need to create a KMZ plotter or am I looking in the total wrong direction when trying to get this onto Google Earth?
View 9 Replies
View Related
Apr 19, 2012
I saw a video on YouTube the Google earth extension for AutoCAD,Autodesk Labs search, but says that is not available for download, I need this plug in, extension of Google earth for AutoCad.
View 2 Replies
View Related
Oct 15, 2010
Is there a way to export a layer from Map 3D to google earth? It appears the built in google earth extension only exports linework that is part of the DWG and not GIS layers.
For example, I have arcview shapefiles of drainage areas for a storm drain report that have been connected to throught the data connect palette, and stylized through the task pane. I would think there should be an easy way to export this drainage layer directly to a KML file that can then be opened up in Google Earth. How to go about it other than converting a map to a dwg and then exporting it to GE?
View 4 Replies
View Related
Feb 16, 2010
I ran into a problem after just installing Civil 3D 2010 when I tried to import an image and elevation data from google earth. The message box says the following:
The Feature you are trying to use is on a network resource that is unavailable.Click OK to try again, or enter an alternate path to a folder containing the installation package 'Google Earth.msi' in the box below.
View 5 Replies
View Related
Mar 29, 2011
When I capture the elevation data from google earth, the elevations on the grid once in Autocad Map 3D are not the same as shown in google earth. It seems that the elevation have been scaled up.
View 1 Replies
View Related
Aug 7, 2012
I'm working on a project looking at modifying cycle routes. I just discovered that they've been added to google maps and I was wondering if there's a way to import the cycle routes from an area on google maps into CAD. If not, I can draw them in on the OS but it would be time wasted if there's a way.
I thought maybe on AutoCAD WS on chrome, but it seems limited on the mapping features available.
View 3 Replies
View Related
Mar 12, 2013
I want to prepare base map by Google earth. How to prepare base map of Jeddah city only (Saudi Arabia). It show clear view of all road name etc.
How can prepared base map of Jeddah City so that it will use in our all autocad 2010 drawings.
View 5 Replies
View Related
Sep 9, 2012
How do you import a google maps tracklog made on my android phone with "my tracks" into the lightroom 4 map module?
View 8 Replies
View Related
Apr 2, 2014
Are the keywords in Lightroom recognized by Google analytics?
View 6 Replies
View Related
Dec 29, 2011
Just want to know whether Google Earth Extension is compatible for Window Vista? Because received an error message when i try to load Google Earth Extension into my AutoCAD Map 3D 2010. Below are the step that i've done:
Install Google Earth Extension - No error (so i assumed the installation success).
Appload - Successfully loaded.
Menuload - Error message occurred as shown below:
View 3 Replies
View Related
Jul 21, 2011
I am using the DWGPublishToGE tool in AutoCAD Map 3D 2012. I can get the images and blocks to finally show up in a fairly clear manner. I was using earlier versions of AutoCAD before and everything was exporting all choppy.
Now that I have the linework in I was hoping to accomplish two more things:
The line types aren't coming across properly (e.a.: dashed lines are continuous)The text, both within blocks and along the path, only comes in as text. It's not fixed to where it is in the drawing. For example, if I have a block with HH in it the line work comes in normally but the text part of the block does not.
See my two images I have attached. The first is the CAD version and what I am hoping to get to in GE. The second is what is happening in GE.
View 3 Replies
View Related
Aug 9, 2012
I just installed 2013 on my pc yesterday. The first task I was given was to import a Google Earth image into AutoCAD to try to get some dimensions on a house for an exhibit. I open Google Earth and set my location to import, then I go to the Render tab, select Set Location, I click Import the current location from Google Earth, click Continue, then i get an error message saying Class not registered.
View 2 Replies
View Related
Sep 21, 2012
The AUGI Magazine (Page43) this month has information on a free download called CAD to Earth. Available Jan1, 2013. Is this the resolution to future downloading and using Google Images in our drawings?
View 6 Replies
View Related
Oct 31, 2013
Is there a way to import bing or google images into 2014 similar to the way C3D use to allow with google? Not just to view on screen but to use.
2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM
View 9 Replies
View Related
Mar 14, 2012
The Google earth map image I insert into my drawing is flipped (north to south) when view in isometric. The surface I download at the same time is OK. I do modify the original surface by pasting another surface into it.
View 9 Replies
View Related
Aug 6, 2013
Just tried using the new Google Font Finder option in DXP9. I select a font that is not already installed and Xara tells me it will now run the 'FontInstall' program, I click the 'Install' button and Windows 7 UAC prompts me to confirm running FontInstall.exe, I click 'yes' and then.... nothing. Xara locks with cursor mouse showing busy when held over Xara. Clicking any part of the program give me a windows 'Xara Designer Pro X is not responding' message.
View 9 Replies
View Related
Jan 22, 2013
My drawing is set to state plane and feet. when I import GE the elevations are different that those reported on the GE screen. For example at a given location GE reports 538 but the c3d surface report 164 a factor of 3.28. sounds like a meter thing going on. is this normal?
64 Bit Win7 OS
View 8 Replies
View Related
Sep 20, 2011
I have been able to publish information to Google Earth without problems, but when I change the Orientation of True North in the project, the results in Google still have the project north as North.
View 3 Replies
View Related