VideoStudio :: X2 Capture Images Into Library
Oct 11, 2010
I have updated Video Studio to 1, 2 and Microsoft X. My current version is 12.0.106.1. When I load a series of images some of thumbnails are just black. In my source foulder they are all OK. I delete and try again and others come up black. All of the pictures are standard .jpg. When I check the properties of the correct images they have 'Camera Information' and 'IPTC/NAA' property categories. The black thumbnails do not have these categories at all. I am using Windows 7 on a 64 bit Dell.
View 4 Replies
ADVERTISEMENT
Aug 8, 2011
For convenience, I use my video camera for both video and taking still pictures. For video I use use a wide frame 16:9 while capturing stills I use a standard frame 4:3 (the standard frame allows a higher megapixel). I use VS X2 for creating my home DVD's and I use Photostory 3 for my slide shows.
I've never used the still capture function on VS until today. I needed a couple of stills from the video to match with the continuity of my slide show.
I realised that my screen capture would be wide screen but I figured I could edit the photo and crop it to 4:3. What actually happens is that VS X2 captures the image and squeezes it to 4:3 so in the end I get these long images!
View 3 Replies
View Related
Jan 26, 2012
I have Corel VideoStudio Pro X3 as well as the trial version of X4 which I have just downloaded. I am having the same problem with both versions. When I go into Capture, there is no image coming through the Capture Window, it is just black. When I hit Capture Video, it does start capturing and it does record video correctly, however when I stop capturing, the preview window turns black again.
How can I get the video to be seen in the Capture preview window?
My computer is Windows 7 Ultimate 64 bit edition. I am using a USB capture device, the Diamond Multimedia VC500 One Touch VHS Video Capture USB 2.0.
View 1 Replies
View Related
Jul 11, 2012
Is there a procedural way to download my photos to LR3 instead of Image Capture on my iMAC? I had Apple Store Geniuses fix the Safe Mode problem (which i posted in a different thread) so when I got home and tried to download my photos from the CF card reader it showed up in the Image Capture screen but not in LR3. I had the CF card reader attached to the computer's USB port before turning on the computer.
Should I have turned on the computer first and then open LR3 before connecting the card reader? My guess is that because LR3 was not opened first, the downloading went somewhere else.
View 3 Replies
View Related
Dec 3, 2012
I've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies
View Related
Feb 15, 2012
I have Ulead Videostudio 9. I am trying to capture from a DVD and following the manual instructions all goes OK up to the Import step. At that stage I get an error message "Temporary working forder does not exist. Report ID 0x8004083d(2109)" First time I have tried to capture stuff from a DVD. Program still works fine on all other aspects. I have checked the closed Ulead Forum and FAQ's but can find no solution. Is there anything I can do?
View 4 Replies
View Related
Jun 3, 2012
No Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies
View Related
Dec 18, 2010
I just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
View 3 Replies
View Related
Feb 25, 2011
I just bought VSx4 but I noticed it crashes as soon as I try to capture
my camera: canon HV20 -firewire connected
my OS: windows 7
I already:
uninstalled, re-installed VSx4
turned off/pc - camera
connected/disconnected camera
since I installed vsx4 I can't capture in vs x3 too.
View 6 Replies
View Related
May 26, 2013
I am using VS X6 ultimate that I purchased yesterday
I am capturing videos from VHS tape using an S-Video connection
I have tried different capture options settings and the capture always saves in MPEG
I believe that AVI has the least loss and would prefer to save in the AVI format since I intend to do some editing of the original content The end objective will be to burn reults to DVD
Can VS X6 capture files in AVI? If so, what settimgs should I use? Any settings that would be best for this type of transfer to HDD?
View 3 Replies
View Related
Jul 30, 2011
My capture card is a BlackGold BGT 3620 (which doesn't come with capture software). I had been using VideoStudio Pro X3 to capture VCRs through its analogue input (using S-Video) with no problems. However, I recently re-installed Windows (nothing different, it had just stopped working), and decided to give the trial version of VideoStudio Pro X4 a shot. When I go into the capture panel and click on "Capture Video", the "Source" field is blank, and the program completely hangs, so I have to kill it.
Of course, I can go back to X3, but sooner or later, it will no longer be supported, or there'll be some other reason I'm forced to upgrade, so I'd rather get this working.I tried running it as admin (although X3 used to work fine without it).
here's my set-up:
Mobo: ASUS M4A79T Deluxe
RAM: 8 GiB DDR3
GPU: Palit NVIDIA GeForce GTS 250 (driver V. 275.33)
HDD: 3 x 160 GB 7200 RPM SATA II
OS: Windows 7 Ultimate x64. All service packs, updates, etc., installed.
Capture Device: BlackGold BGT 3620 (driver V. 8.1.0.0)
Capture Media: UK PAL VCR, from standard VCR player, through S-Video
View 6 Replies
View Related
Mar 1, 2011
Is it possible to capture from a file using VS Pro X2? I'm trying to get an AVI file into my timeline. Can I capture the file or do I Import it to video clips and then drag it into the timeline.
View 7 Replies
View Related
May 9, 2012
I've got USB 2.0 AV Grabber (STLab) which came with Video Studio
I'm trying to copy VHS cassette footage onto disk.
I capture the audio track, but no video.
View 7 Replies
View Related
Oct 23, 2011
When I connect my camera and select Capture Video, I receive the error:
Unable to switch to capture mode
Check if your video capture driver is working properly
15023:4:2
I select OK and it properly identifies my camera in source as Canon HV30
Using the VS Pro X3 software, I can play, ffwd, pause, etc the camera however, it will not Capture the video at all
This is on my dads pc. he is running:
- Video Studio Pro x3 Pro which has had all patches applied.
- PC is an intel i5 2500 on a Asus P8P67 Pro motherboard.
- 64 bit Windows 7 Home premium all patches applies
- Canon HV30 connected via firewire
Note, I have used this camera with VS Pro x3 on another pc with no issue.,
not sure if i have got a setting applied incorrectly in vs pro x3 or not.
View 9 Replies
View Related
Aug 11, 2011
So what is a good reliable capture device that works with X3 and won't mess up on me? I've looked at ezcap, the real one, and I'm still not sure. BTW it has to be USB as I use my laptop.
View 10 Replies
View Related
May 20, 2012
I tried to use the trial version of VS 11plus with a Honestech Vidbox NW03 video capture device. I wanted to use VS11plus because I was unhappy with the video quality of Honestech VHS to DVD software. The VS wouldn't allow me to use the Vidbox even after uninstalling the Honestech software. I also tried using VS after uninstalling the Vidbox software. The only device that ever worked with VS for me was a Easy cap. Is Easycap the only device that works with VS or did I do something wrong? I have Vista Home Basic, 2.16GHZ, 3GB Ram and 250GB Hard drive on my laptop.
View 7 Replies
View Related
Oct 9, 2013
I have ION video 2 pc mkll. When I try to capture i cant get a preview. Have tried to change settings with no luck. The drivers for it 10 but no preview show up.
View 8 Replies
View Related
Feb 8, 2011
I first used the above on a trial basis and had no problems. Then I bought it and I cannot capture my video. I get the no video capture device installed. I have tried 2 different cameras, computers, video capture drivers, firewires and I uninstalled and reinstalled Studio 12 in addition to installed a trial Pro3. I also uninstalled other devices like Flip Software as was suggested by a Corel support person. I am using Windows XP.
View 1 Replies
View Related
Apr 8, 2013
I have a new issue with screen capture in VS pro x6. When I try to capture the sound from my computer i.e. a clip on (you tube) when I hit the record button (the red circle) I get this message:
it counts 3-2-1 then…at 1 (Prepare Record Failed!!! #15)
However it works fine if I disable it… when I record my voice when it is screen recording, no problem.
Also, when I try to record a game play, full screen, it stops once I launch the game, a message says that my screen capture is complete without me hitting the stop capture button!!
My computer is running win 7 Prem. Service pack 1 64 bit 12 GB RAM Intel core i7 @ 3.40 GHz
View 2 Replies
View Related
Oct 6, 2013
I am using VSX4 and I wonder is it possible to capture the computer screen with this version? If not will any of the newer versions that will capture the screen? If not do you know of a program that will do that?
View 10 Replies
View Related
Nov 7, 2010
I have a large video file I am trying to render in VS pro X3. The source file is about 3.4 gig. (VHS capture to MPG) I have trimmed out small pieces and inserted a title and a few transitions and I am now trying to rerender it. the process gets to 9% and freezes. No error. It just freezes.
I am trying to output to NTSC DVD 4:3 format.
View 9 Replies
View Related
Nov 29, 2010
Is there any way to schedule video capturing with this software ? For example, can I automate it to capture daily at a certain time for a fixed duration or can this only be done manually ?
View 1 Replies
View Related
Nov 20, 2012
I am having a bit of trouble with the Ulead Video Studio 10.0 Program I am trying to record Xbox 360 Gameplay and I have the picture both on the TV screen and Laptop. But when I try to record it says "Cannot Start Capture Graph". that i can start recording.
View 2 Replies
View Related
Oct 28, 2011
I am having difficulty finding basic instructions for VS Pro X3. I transferred a film from my friends PC to my mobile drive. The film is avi format. I choose import from digital media, but cannot move it to the editing screen.
View 3 Replies
View Related
Mar 18, 2013
I have set my video capture format to 16:9 (widescreen). The picture in the movie capture preview window is 4:3 and stretched vertically. However when the file is played it is in fact 16:9.
Is there a way I can set the preview window to display the correct aspect ratio during capture ?
View 9 Replies
View Related
Mar 1, 2011
Is it possible to Capture in MPEG FORMAT with Pro X4?
It was possible with Pro X2 but not with Pro X3.
View 2 Replies
View Related
Oct 10, 2013
Been using VidoeStudio Pro X5 for couple years and just picked up a used PC. It had XP and could capture with installed VS X5 with no issues. Today i upgraded to Windows 7, reinstalled VS X5 and cant get past the "Unable to switch Capture" error. I can capture using my Canon Vixia HV40 and Sony FX1000 via Firewire with no problems using HDV Split, Roxio Creator and Cyberlink Powerdirector, so problem must be somewhere with VS X5.I can "control" the camera (stop, play, rewind,etc) through VS X5, but the Capture and Option buttons are grayed out and no image in preview window.
I have tried googling and downloaded a few codecs and drivers but no joy. Naturally I have rebooted and tried fresh install as well
View 3 Replies
View Related
Aug 2, 2011
I have been trying to capture both Video and Audio in Video Studio Pro X4. I have a program called Diamond One-Touch Video Capture V500 that uses a USB connection for the Video and Stereo output from my Sony Handycam Digital 8 Model DCR-TRV740. The one touch software works well to capture both the Video and Audio, however, I was hoping when I purchased the Corel Video Studio Pro X4, that I would be able to record both video and audio with the capture feature, since V500 Video shows under sources in the capture screen.why the Video Studio will not record the audio while the One Touch Video program will?
View 5 Replies
View Related
Mar 8, 2011
I am using VideoStudio 11 for my capture software. what capture hardware is compatible with my software. I have Dazzle DVD recorder plus and Hauppauge USB-live-2. VideoStudio 11, will not work with either of these devices. When using the Hauppauge hardware I get the following error message: 15023:4:2, unable to switch to capture mode. .
View 3 Replies
View Related
Oct 3, 2011
Recently purchased VS PRO X4.Firstly very glad that I did as it includes lots of features that I once longed for (previous versions I have are VS9 and VS10).
Cannot start the capture graph..I have read another post from a user who also experienced this problem but after reading the replies I could not find a fix for me.I have PRO X4 installed both on my notebook (for use when on vacation) and on my desktop PC.NOTE that I do NOT experience the problem on my notebook.
Today when I attempted to capture video (for the first time) from my Vidcam using my desktop PC I get the error.I am capturing to DV.I do NOT have any problem capturing from the same VIdcam using VS9 on the same PC.
View 14 Replies
View Related
May 11, 2012
I have some mini dv tapes that seem to have been shot in: 4:3 720x480,DVD, Variable BitRate
I am currently in the capture video section of VideoStudio and wanted to know what is the highest quality capture format for these tapes.
From the video studio drop down it says that i can capture in the following:
DVD
DV
Mpeg
VCD
SVCD
Also under options> Video options
It has a bunch of Video profiles, should i change any of those?
My final output will be onto Standard DVDs
So my questions are:
1- What is the best above format to capture in?
2- Should i change the video options profile?
3- Ideally I would love to have the video shown/edited in 16:9 is that possible considering it was shot inf 4:3? If 16:9 is possible should i capture it differently to achieve 16:9?
View 9 Replies
View Related
