Corel VSX4 now says "Either no video capture driver is installed in this system or do device is connected" now I am unable to capture new video from any source. W7 64B and I have downloaded the latest updates.
View 6 RepliesIn capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "format" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neither one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
View 6 Replies View RelatedEventually I can get it to work but sometimes only after many (10-20) tries. Very frustrating since it is possible - just not reliable.
When I am in Capture (Visual Studio SE DVD ver 10) and go to Options - Video and Audio Capture Settings and try and select S Video (default is Composite), it seems to take but after clicking OK and the Change Field Order window pops up and does its thing, it frequently will not 'take'. I repeat numerous times until it does take so it is possible.
Any configuration file that holds the default settings for this so I can set S Video as the default instead of Composite. Then (I assume) the problem wouldn't matter.
What's the best format to use when transferring VHS tapes to my p.c? I've tried AVI but an average tape takes up to 400Mb on my hard drive which seems excessive. The VHS tapes mainly have films and documentaries the majority of which will be deleted once I've watched them on my PC.
View 2 Replies View RelatedI just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
I've got USB 2.0 AV Grabber (STLab) which came with Video Studio
I'm trying to copy VHS cassette footage onto disk.
I capture the audio track, but no video.
In VS X4 we do not have the ability to match the project properties to the specs of the source video. When editing "project properties", we only have two choices for compression (NTSC DVD and PAL DVD) which only allow a maximum resolution of 720. In X2 we had many more choices which included MPEG-2 where we could get up to 1920.
I thought it was rule number one to match the project properties to the source video. Maybe that is not so important anymore, but snapshots for freeze frames must be done in project mode to include any attributes. The resulting snapshot is the resolution of the project properties and therefore not the same as the orignal video. Once rendered, it will not look the same as it's parent frame. Maybe freeze frames are not important to anyone else, but they are to me.
I shoot with a Canon HV20, so I need 1440x1080. I have created an empty project in X2 with the correct properties that I use to start projects in X3 and X4. X4 appears to maintain the project properties once they are set.
Is there any way to schedule video capturing with this software ? For example, can I automate it to capture daily at a certain time for a fixed duration or can this only be done manually ?
View 1 Replies View RelatedI have been trying to capture both Video and Audio in Video Studio Pro X4. I have a program called Diamond One-Touch Video Capture V500 that uses a USB connection for the Video and Stereo output from my Sony Handycam Digital 8 Model DCR-TRV740. The one touch software works well to capture both the Video and Audio, however, I was hoping when I purchased the Corel Video Studio Pro X4, that I would be able to record both video and audio with the capture feature, since V500 Video shows under sources in the capture screen.why the Video Studio will not record the audio while the One Touch Video program will?
View 5 Replies View RelatedI am using VideoStudio 11 for my capture software. what capture hardware is compatible with my software. I have Dazzle DVD recorder plus and Hauppauge USB-live-2. VideoStudio 11, will not work with either of these devices. When using the Hauppauge hardware I get the following error message: 15023:4:2, unable to switch to capture mode. .
View 3 Replies View RelatedNo video preview during capture and did not see a cure to the problem. I just installed and updated VS X4 on Windows 7 and have the same problem. The capture goes perfectly it just does not show a preview on the screen. I tried capturing in Windows Movie Maker and it shows a preview while capturing
Direct X upto date preference set to window preview.
im trying to capture in VS x4 but i only get audio. no video is coming up on my capture screen but if i record, the recording will show video... video just wont show up in the capture screen inside VS x4.. i read where people couldnt see video if they were trying to capture DV and some were told to get windv or someother program to get the video but im not trying to capture dv.. im trying to capture video with my tv capture card, avertv hybrid volar max.. it captures the audio thru the vd x4 capture screen but not the video although if i do a recording both audio and video will play in the mpg.. why cant i see the video in the capture screen?
View 2 Replies View RelatedI created a long video of me playing a number of cover songs and I want to grab those songs individually so I can post them on YouTube.
I'm using Ulead Video Studio 11 Plus.
I'm trying to capture video from a VHS/DVD machine using an EasyCap (2.0 I think). I'm able to get video but it's pulling the audio from my computer's mic. I investigated settings and found that 1) the format resets to MPEG if I set it on DVD and 2) when I go into Options > Video and Audio Capture... and select the only option in the drop-down for Audio device that says USB, the program crashed. I opened it back up and saw that it was still set on USB for the Audio device, but when testing I didn't get the video's audio. I'm new to capturing video this way, am I missing something? I double checked that the cables are plugged in correctly.
View 1 Replies View RelatedI downloaded video studio x4 trial to test drive. I have the upgrade boxed version on the way. I'm running it on my Win7 Home Premium system, 6 gig ram. My camera is a JVC gr-d850 mini DV tape camera. I connect the camera to my computer using a 4-6 pin avi cable. The computer detects the camera with no problem. However, when I open VS x4, it tells me no camera is detected or not connected. My laptop has a 4 pin firewire connection. If I use a 4-4 pin cable between the laptop and camera and open VS x4 it detects the camera with no problem. why the desk top can detect the camera but the software on it can't? And using the laptop instead is not really an option since it is way under powered to handle what I plan to throw at this program.
View 14 Replies View RelatedI enjoy the Video Studio Pro X5 over X3 and I finally got the machine to accept the driver for the samsung minidvd video camera. I selected capture video and started playing the video and hit start capture. It appears to work, but it only records and saves maybe 30 seconds of video. I did a 15 minute tour of a cave but less than 30 seconds of the video is saved.
View 14 Replies View RelatedI have just installed Video Studio 5 and using my Canon XH/A1 HDD camera I get the following message " can not change to capture mode --check video capture driver is working properly" .Does this mean there is not a driver for my camera and secondly how do you 'check your driver is working properly'.
View 2 Replies View RelatedWhen I connect my camera and select Capture Video, I receive the error:
Unable to switch to capture mode
Check if your video capture driver is working properly
15023:4:2
I select OK and it properly identifies my camera in source as Canon HV30
Using the VS Pro X3 software, I can play, ffwd, pause, etc the camera however, it will not Capture the video at all
This is on my dads pc. he is running:
- Video Studio Pro x3 Pro which has had all patches applied.
- PC is an intel i5 2500 on a Asus P8P67 Pro motherboard.
- 64 bit Windows 7 Home premium all patches applies
- Canon HV30 connected via firewire
Note, I have used this camera with VS Pro x3 on another pc with no issue.,
not sure if i have got a setting applied incorrectly in vs pro x3 or not.
As I launch a videocapture on videostudio pro X4, I don't get any video display on my screen, only hearing the sound. Afterwards, the generate file is OK with picture and sound.
View 5 Replies View RelatedWhen capturing video, other formats besides DVD are missing. I am trying to import video for outputting Blu-Ray but I am unable to select Blu-Ray as the imput format. It's not greyed out, it's missing along with other formats. The only format that you can select is DVD.
View 14 Replies View RelatedI'm running VSproX2 and I'm trying to capture video from my Panasonic DVX100 camera. I have some Christmas stuff I want to edit. I cant seem to get VS to recognize the Camera. I dont know if it's a setting in the camera or a bad firewire (4pin) port.
Does the camera need a driver to be loaded? Should the PC have recognized the Camera when it was plugged in (like USB devices)?
I have the camera set to VCR mode. In VS, I go to Capture and select Capture Video. It says "Either no device is installed, or the device is not connected". Nothing is listed in Source or Format.
I just installed VideoStudio Pro X4 on my Dell laptop with 64BIT, Windows 7 Home Premium. I am TRYING to use an EZCAP 64BIT device with my 8MM camcorder connected to it and "Composite" input selected as is appropriate in this connection. VideoStudio loads fine; select Capture tab, fine; click Capture Video, that loads fine with "Capture Video" flashing and waiting to be clicked again to begin capture, fine; I click "Capture Video," the icon changes to "Stop Capture," fine; I press PLAY on my 8MM camcorder; the video and audio begin, and I can see and hear it on my machine for approximately 8 - 10 seconds, then a box pops up with the message, "Unable to capture the file because it is copyright protected. OK"
View 1 Replies View RelatedI have Corel VSP 3 - is there any way within the application to do an active desktop video capture?
View 1 Replies View RelatedUsing VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
I bought a new computer (Dell E5520 laptop with Windows 7) and transfered all my programs/data; Video Studio Pro X4 wouldn't work - would not capture video. I un-installed the program. When I try to install VS ProX4 on my new computer from the disc I get a small blank window and a flashing diaglogue box pops up so quickly I can't read it. I have run virus scans and removed all identified threats. I am running a Intel Core i5, have 4GB Ram and 500GB disk. Installation and operations were great on my old system running XP.
View 2 Replies View Related1. I did read somewhere else (I can't find it now-by Ron P, I think) that for video editing, the computer must be of quite a high spec.
For the first time, the capture managed to do 70% of the DV tape. But now it wont do it. Is it my PC? (spec provided from Belarc report)
Been using VidoeStudio Pro X5 for couple years and just picked up a used PC. It had XP and could capture with installed VS X5 with no issues. Today i upgraded to Windows 7, reinstalled VS X5 and cant get past the "Unable to switch Capture" error. I can capture using my Canon Vixia HV40 and Sony FX1000 via Firewire with no problems using HDV Split, Roxio Creator and Cyberlink Powerdirector, so problem must be somewhere with VS X5.I can "control" the camera (stop, play, rewind,etc) through VS X5, but the Capture and Option buttons are grayed out and no image in preview window.
I have tried googling and downloaded a few codecs and drivers but no joy. Naturally I have rebooted and tried fresh install as well
I have a windows 7, 64 bit quad core with 8 Gigs of ram, and 500 gigs of hard drive. I'm using the latest Video Studio Pro x5. After some time, and not always at the same time, it stops capturing, and says "unable to capture video because it is copy write protected". It's not copy write protected, and I cannot figure out how to get it to stop doing that.
I'm capturing an old VHS tape using an Easy Cap (the one that is new, and works). Apparently there are some old Easy caps that do not work.
I am using X2. I have been capturing video from my camera with no problems. Today, I set it up again and now can't capture. When I press capture video, it runs for 10 seconds and then give a message that capture failed, file is corrupted and unusable and of course stop capturing.
I can't figure out anything that I am doing different than before when I captured successfully. I have restarted my camera, my computer, and video studio all with the same results. During the 10 seconds, I am getting video to my computer.
How do I get the audio as well as the video, I am using a VC500 capture device and the video comes in clear but no audio.
View 3 Replies View RelatedIt seems I have no more room to install a stand alone Video Capture Card and the maximum video card I can and am about to install on my Gateway 700XL computer is a GeForce 7950 GT AGP which does not include video capture. So, I have been told that I should consider buying a "Dazzle Digital Video Creator DVC-90 Video Capture Device and Movie Maker" devise. I assume I have no need for anything related to the "Movie Maker" for I have VS11Plus and may soon upgrade to the latest Video Studio if my system is compatible with the latest. URL.....
DAZZLE CAPTURE DEVICE: URL....
Something else that may be worth adding is info on the Camcorder which is: URL....