Premiere Pro :: Color Correction Shuts Down?
Mar 21, 2014Everytime I try to use any color correction my system shuts down.
View 2 Replies
ADVERTISEMENT
Premiere Pro :: Secondary Color Correction Eyedropper?
Jan 30, 2014When I use the eyedropper to build a secondary color correction mask (rgb curves, three-way, etc) I have to click the eyedropper with the + and then go over to my source monitor and click on the portion I want to build the mask for. If I need to select multiple colors to dial in the mask further I have to keep going back over and clicking the little eyedropper + and then back over to the source monitor and back and forth over and over again.
Â
I know there is a better way, or at least a short cut to reselct the eyedropper +
Premiere Pro :: Preview And Render Corruption When Color Correction Added To Clip?
Jan 25, 2014But I've added some color correction and some of my clips seem to be rendering out corrupted once the effects are applied. If I toggle the effects off it goes away, but toggling them on again and it's back. I've restarted the machine several times and the corruption reoccurs in the same spots. Is there a cache that I need to toss? When I rerender or export the the file the corruption remains.The effects I'm using are basic, auto color, fast color corrector, and brightness & contrast. here's what it looks like.
View 2 Replies View RelatedPremiere Pro :: Lens Distortion Correction In CS6?
Mar 6, 2013I'm trying to correct the distortion caused by a wide-angle lens in Premiere CS6. From what I can tell, there is no filter or transform / distort feature within Premiere itself. I followed the steps in this tutorial to open the MPEG4 in Photoshop, apply the lens correction filter, and then export the video again to be re-imported to Premiere. URL....
Â
However this tutorial is for CS5. I am seeing no adjustment or filter layer in my layers panel, as it appears in the tutorial. When I go to export the video, it seems the Adaptive Wide Angle filter or the Lens Correction filter has only applied to a single frame of the whole clip. Bummer.
Premiere Pro :: Secondary Exposure Correction?
Mar 27, 2014Is there any way to correct spot exposure problems [ie. clipping] like you can correct secondary color with Three-Way Color Corrector?
Â
I have a clip where a white box that reflects too much--it moves, so I need the exposure correction to move as well--like color corrections move with the Secondary Color Correction, but with exposure instead.
Â
I just need to tone-it done some, if possible.
Â
I tried using the Three-Way, but there isn't enough color to grab.
Photoshop Elements :: Using Color Swatches For Color Correction
Oct 8, 2013I am taking pictures of art and would like to correct the photos so that the colors are accurate. Need to use some kind of color swatch in each picture? I would like to include the color swatch strip in the edge of each picture so that I can correct the colors more easily and then crop the color swatch out. What kind of colors do I need in the color swatch? Also, would it be useful to have black/white/50% grey in the strip to work with leveling? I am going to correct the leveling and try to remove the color cast.
Â
I also have to photograph things which are very shiny (e.g. coated in shellac). How to use an external flash to minimize flash glare?
Photoshop :: Color Correction In CS3?
Mar 12, 2012when you move it to PS he has you use the curves panel to color correct. Of course that entails using the black eye dropper and clicking on the blackest/darkest area of the photo, similar for the white dropper, and after a nice little trick to find the right spot......... an area for the midtone dropper.Â
Â
The thing is I've noticed that once I make that first click with the black dropper, that nice contrast I had from ACR adjustments goes out the window and the photo brightens up a lot. The final steps of putting 3 points on the curve and dropping the blacks end and raising the whites end brings it back a bit but I was thinking isn't setting the WB with the dropper in ACR already color correcting?Â
Even at the end of the book when he goes through his actual workflow using a provided .dng example he does all the ACR stuff and then moves to PS and uses the curves panel.
Photoshop :: Color Correction For TV
May 14, 2012I want to display photos shot as JPG from a DSLR on a TV. When played on the TV they seem dark and lots of detail gets lost. How to make my images look good on a LCD TV? I am pretty new to Photoshop, would I just play with the Levels?
View 3 Replies View RelatedVideoStudio :: Color Correction
Sep 7, 2011I had filmed a wedding with horrible lighting my XL2 was horrible the lens setting was stuck on 1/32 the GL2 has more vibrant colors .
View 6 Replies View RelatedPhotoshop :: Color Correction
Jul 10, 2006I am interested in which method to use to correct color. I try using curves and end up with a blown color look. Then I go into Levels and change what I did in curves.
View 4 Replies View RelatedPhotoshop :: Color Correction
Aug 27, 2007I don't know why I can't change my Photoshop to Black either in foreground, or background color. I set it to 00000, but it shows dark green color.
View 7 Replies View RelatedPhotoshop :: Color Correction
Apr 29, 2009In PS 7.0. I have a brochure done by a printing company & I have the source photoshop files. I am creating a new piece, but I would like the brochure's background color to match the background of the new piece.I have took the background file of the brochure provided by the printer & placed it on the new piece. The new piece has been sent out to a different printer. It's stock is going to be 18PT.C1S with high-gloss film lamination.They have printed a proof & realized the background colors do not match. The brochure has more yellow in it. Is there a way I can color correct the file so I don't have to pay the extra for the printer to do it? Do I just add more yellow with one of the adjustment layers?
View 1 Replies View RelatedPhotoshop :: Better Color Correction Techniques
Apr 27, 2013I am taking photos of parts for a client. I've got a pretty good method down with correcting the originals to achieve the results I need. First here is the original. I'm using different color temp light sources, the walls of the photo box are slightly gray, and the table the parts are sitting on are white. So i'm trying to achieve the most accurate camera settings to get the original below:
Â
After doing levels and exposure correction in PSD, I get what I want. I played around with the channel mixer and color balance to see if I can properly correct the object so it looks like gray steel, and not having that slight yellow/green tint to it.
Â
 The only way I could figure it out is to just turn off the hue saturation and it gives it a somewhat decent result as seen below: But suppose my object is made of gold, or has a piece of plastic on it that's red; if so, then turning off the saturation will not work.how I can use other controls in PSD to achieve a more accurate result?
Photoshop :: Color Correction - RAW Files
Dec 2, 2012I took some family portraits using a Canon D60, RAW files.
I'm using Lightroom and Photoshop to work on them, with the goal of making a hard-copy print.
Also, I used florescent photography lighting, with "6400K" bulbs that came with the lights.
My problem is a little yellow tinting in some of the skin tones. My face, for example, looks just fine except for the shadow areas around the eyes, where it seems a little yellow-green, looking almost like a bruise. Meanwhile, my nephew's face looks a bit yellow.
I've used (in Lightroom) the neutral eyedropper on white clothing and grey background, and everything else seems fine. That is, the photo is not over-all tinted. I've tried the different Camera Calibration settings, and tried the temperature/tint sliders to see what difference it made.
How I might improve my photos? I've attached a detail, saved with an ICC profile of AdobeRGB.
Photoshop :: Color Correction Through Levels
Dec 28, 2004To me, an easy and non-subjective way to make an image color-neutral is through Levels.
I leave the RGB channel untouched and use strictly the separate color channels (ctrl 1, 2 and 3), adjusting the black and the white sliders so that the blanco parts (non-information) on the edges of the histogram are excluded.
I was wondering if there exists a shortcut for this, since it is a verifyable action based on concrete readings. When scanning a large amount of images, it seems unnecessarily exhausting to repeat this action time and again.
The Auto Levels or Auto Colors commands don't work subtle enough, because they usually discard the outer parts of the histogram.
Photoshop :: Question About Color Correction
Apr 13, 2009I'm trying to color correct some photos, yet when I shift click on a white area, get my digits from the info panel, and start enterin them in the curves value, it's not working properly....the color won't change, also, with midpoints, I used the 50% gray method, found a spot, and the image color went completely nuts, does anyone have a good site for a tutoiral on this? am I doing something wrong?
View 5 Replies View RelatedPhotoshop Elements :: Use A Color Correction In 10?
Jul 8, 2013i got a Color checker last week (SpyderCeckr) and now i try very hard to put this color correction into PS Elements 10. I have already installed ACR 6.7. My problem is i can not choose any .xmp data in ACR. Is it possible to choose? Or is there a other way
View 2 Replies View RelatedLightroom :: Global Color Correction In LR?
Sep 7, 2013We have a white balance tool in the develop panel, but I could not find a way for setting black point in LR ...
How can I set the darkest point to the neutral color?
Photoshop :: Selection / Color Correction And Blending
Nov 24, 2012How do I make a selection of ALL the yellow on the Meatball building and make it a deeper yellow the way it has been done in the attached photographs:
Â
BEFORE
Â
AFTERÂ
Someone suggested playing with the Color Range: Select/Color Range and then use the lasso tool plus the option button to delete what you don't need. But that's not working for me.
Â
And in the next photo, what is/how do you achieve the blended effect on the area that is the where you would more obviously see that this is made-up of two photos? It's a blending mode right? Which one?
VideoStudio :: Color Correction In Corel Software
Mar 24, 2012i use pro x4 and i dont like the color correction in corel software.there is no midtone high & low colors to get a cinema look.in every other software you get this option,so i must to edit my stuff in corel and then color correct & rendering in sony vegas to many work,in the next version add this option its very important no the screen recorder in prox5
View 4 Replies View RelatedPhotoshop :: Favorite Color Correction Plugin
Jan 30, 2006If you had to recommend a "color correction" plugin, which would it be?
I'm assuming that most you use PS's native tools for the most part but have a couple color correction plugins you think actually work...
Photoshop :: Spot Color Correction - Blending
Feb 23, 2004I am doing spot color correction on an image, I have a hard time getting everything to blend correctly. For example, I'm working on an image where the bottom right hand corner is a lot darker than the rest of the piece. When I color correct that part of the image,
View 2 Replies View RelatedPhotoshop :: Auto Color Correction From The Level
Mar 21, 2006I clicked on the auto color correction from the level because the picture was pink. I looked at the shadod clip .50 , highlight clip .50 and closed it when It changed the picture and it's better now but Can I still use the arrow from red, blue and green from the level to get better pictures?
View 4 Replies View RelatedGIMP :: Color Correction / Matching Without Whites
Oct 21, 2011I have a set of photos, taken a while back. They're closeups of the stages of a craft process, and not easily reshootable.
I was with the craft, I didn't notice that the day was passing, and that the light I was shooting with was varying, and I didn't do a manual white balance for each shot.
Each photo on its own looks "OK", but when I tried a montage, the white balance differences between the shots was UGLY.
So - I don't need accurately calibrated shots, but I'd like the colorspace of all the photos to be as similar as possible, so that identical physical objects have the same in-image colors.
There are several areas in the photos that are of the same (physical) item that could be used to drive a calibration/matching process, but they're not white/gray/black.
So - how do I match up the colors? I've tried to botch at it by hand editing curves but it was tedious and error prone.
GIMP :: Color Correction Lookup Texture?
Aug 2, 2013Is it possible to use GIMP to produce a color correction texture look up? I am hoping to use GIMP to create texture correction lut to create moods in Unity, as described here.
View 1 Replies View RelatedPhotoshop Elements :: 8 - Any Color Correction Controls Like RGB
Mar 6, 2013I used to have Photoshop 7 and often used the RGB controls to make color corrections. Now I have Elements 8 and I miss having RGB controls. Is there a way in PSE 8 I can simply adjust R, G, and B individually like I've been used to?If not, what is the closest substitute in PSE 8?
View 1 Replies View RelatedAfter Effects :: Chart Guide For Color Correction?
Jul 12, 2013I've been learning After Effects for several months and I have to say its a blast. I'm already in projects where they require special effects, and from months of just teaching myself.I'm almost finally able to achieve any effect I want, for example: a bomb made to implode the earth's core with a black hole (a still picture from an upcoming super hero comedy series called "Zack").
Â
Anyways, I'm now learning more advanced color balance, I always knew the basics and I just go with what looks good (which is how it usually works), but I never quite understood. Like curves.I watch tutorials and see people use a mix of colors to get the color they want. Honestly I don't know my colors in that way, is there a chart guide for color correction?
Photoshop :: Color Correction - Achieve Over Exposed Effect
Oct 20, 2013How to achieve this kind of over exposed contrasty effect of a picuture?
Here were the examples.
Corel Photo Editing :: Underwater Color Correction
Nov 26, 2007Need color correcting my underwater shots.
The only posts I ever see on any site usually deal with Photoshop. I've been getting decent results using one step photo finish and then sliding the overall brightness bar to a negative position usually -10 to -30. I then go to fade correction and use a value of 46. This seems to do a decent job. My wife and I are avid snorkelers so I'm usually taking my pictures at a depth of 10' - 30' of water with an internal flash.
AutoDesk Smoke :: How To Make Color Correction And Grading
Jun 10, 2011how to make color correction and color grading in Autodesk Smoke.
View 2 Replies View RelatedAutoDesk Smoke :: Export XML Of Sequence For Color Correction
Oct 8, 2012Can Smoke export XML?
What if I edit in smoke and want to export an xml of my sequence for color correction in another app that imports xml.