the problem is that i am trying to do the blur/guassian blur then adjsut layers to make all hte boxes round liek for an interface but the adjust/layers window is not what all hte forms are like.
View 8 Replieshow can i adjust the view on my layers, I'm unable to view the work that I'm creating on mylayers. What i see is a brush icon?
View 4 Replies View RelatedI'm trying to adjust brightness/contrast and saturation over about 30 layers on an animated GIF. Everything looks great until I do a save for web and click on the animate box. At that point, the color/changes drop off completely. It shows up fine when it's just the one layer being shown. And it seems to be showing up on all the layers when I'm in the main edit window. I keep looking and making sure I have the 'this adjustment affects all layers below,' and I do. I even tried saving a GIF with the other setting turned on and I got the same thing.
Anyway, I exported a few GIFs, thinking maybe the adjustment layers would kick in as it saved, but nope. Neither layer saved into the exported GIF.
I'm sure this is just a simple setting I'm missing, but I'm banging my head against the desk at this point.
how to adjust the transparency of locked layers? Also when I isolate a layer the other layers appear semi transparent, is it the same setting to adjust this transparancy as well?
View 2 Replies View RelatedIs there a way to adjust the colour balance on multiple layers at the same time?
View 2 Replies View RelatedAdjusted to the active object layer top / below forward / after layer.The active layer is adjusted to page top / below, forward / after layer.
View 4 Replies View RelatedI was just using My CS3, and i think i clicked something and all of a sudden i get pixel/inch/cm measurements surrounding my document,
View 2 Replies View RelatedI don't need help on the designing and stuff, but there's something weird going on with my photoshop: the Hue/Saturation thing.
It goes right to the top, and it gets worse everything I use it [ I use that a lot, and I need it. ] It goes too far to the top, that I can't even see the 'OK' button anymore, so I have to click 'Enter' instead on the keyboard. But now it's getting worse, the Cancel button is half-gone. And the Hue bar is almost disappearing also, which I need that the most. And it's really annoying that it goes up too far.
these weird lls keep showing through.It is all over my psd file and when saved they show us as well.This is photoshop CS6
View 7 Replies View Relatedi accidentally pressed some keys and my whole "art board" turned to an annoying bright blue color. It is originally the gray part outside of the painting area.
I cant seem to find anything in the general settings that will change it back to gray. if you know how to change it back,
When I type text into a box and I want to scroll through my available fonts to see what font suits my needs, I get a weird problem. No matter what font I am on, if I try to scroll through the list, it goes back to the very top.
This happens everytime and I haven't been able to figure out what is wrong. What I need to do (i think) is trash the fonts folder and just have the basic fonts. Then I have a backup font folder (from another machine) that I can put on this pc, same fonts but that machine doesnt have the problem.
I've recently switched to a new pc with Vista-64. After installing my CS3 I tried to give it a test to see how it performs. Medium sized files run very fast on difficult filters such as Lens blur. But when I open a large file like 300mb and try to run a Lens Blur filter on it, things get very slow for this PC. I think it takes 3-4min to complete the task.
What also bothers me is CS3 is writing/using on a external HD that's not chosen to be used as a scratch disk. I noticed this as I see the blue lights get active on the WD external HD. Then I checked what's happaning in the disk going to my computer. When I look into the HD I see bunch TMP files written during this filter task. Same type of files (different sizes)are also seen in the dedicated scratch disk. Is it normal that CS3 will access other HD's eventhough they are not chosen as Scratch disks or is it there anything wrong with my CS3 or OS? Also I believe that I should get a better performance with my setup, anything you might suggest?
My computer: Gigabyte EX38T-DQ6 motherboard, Intel Core2 Extreme x9650, Vista 64-bit, 4GB DDR3 RAM, OS, other programs and CS3 located on 4 WD Raptor HD's configured as RAID 0+1, separate 70GB Raptor HD for scratch disk, all photo files are stored on 2 750GB Lacie HD's as RAID 1 and I have one WD external 2 TB HD for back up connected with Firewire800. This is the one that's being accessed by CS3.
I try and scan a B&W photo, I get like a crackled texture
I scanned in 1200, the source image is sharp
I tried to apply some kind of descreening filter but the printed image was sort of blurry afterward
I've been using photoshop at work to create covers for CDs, but we have two types of CD case, the normal kind, and on that's kind of a smaller version of a DVD case.
When I created the cover for the normal CD cases I measured up the correct sizes and inputted them when I create the new file. The cover looked much bigger than actual size when it appeared on screen, making working on it much easier, but then when it printed, it printed at the correct size.
When I came to make the cover for the second kind of case I did everything exactly the same as far as I can tell, but the cover doesn't look bigger on screen this time, it appears on screen at actual size, making working on it much harder. Then when it prints off, it still prints at the correct size but looks terribly blurred.
I have no idea what has caused the two different projects to behave so differently. Any one have any ideas? Have I accidentally changed some setting somewhere?
when I was doing a quick mask on something and using black to erase stuff, it was grainy and there was an obvious line so fading can never be perfect.
I freaked out and thought maybe it was a picture problem, I opened another canvas and started using the brush tool with the biggest fade and still got the same effect, an obvious edge mark and no fade at all.
I have this weird problem with the text tool, it happens only with a certain file. The text size won't go higher than 18 pixels, no matter which font is selected. When I have multiple files opened, it works ok with other files, but not with that particular file.
To make matters even more stupid, if I type something on a different file and duplicate it from there, it works ok. I can even use transformation to change the size but I can't use the type tool to change the size.
Could someone who speaks better English or PHotoshop speak than me please translate this cunundrum I get EACH AND EVERY time I change a workspace:
DO YOU WANT TO SAVE CHANGES IN THE CURRENT SHORTCUT FILE BEFORE RESETTING THE SHORTCUTS
I don't know what's going on here , but I don't remember anything about a shortcut file . I just clicked a new workspace quite simply. And I don't remember thinking in terms of saving any changes or resetting any new stuff.
I have a problem with my smudge tool. Every time I try to smudge around with a shape, it seems to draw a rectangulair box around the shape, and when you smudge out of those boxes white edges appear around the smudge.
View 3 Replies View Relatedmy photoshop is acting really weird. i thought i ahd fixed it but i obviously havent. the thing is, my text size wont go bigger then 18px. and i have no clue why.
when no windows are open i can set it to whatever size i want, but when i click new file or open, it goes right back to 18px.
my rectangular crop tool is now rounded on the corners and i can't get it to make a rectangle with square corners.
View 1 Replies View Relatedwhen i use the eracer tool mostly, does anyone know what can be causing this?
Here is an example when i had an image over another, and attemped to erace the top image.
Lets say I have a B&W all text document in PDF form and I want to know what percentage of the document is taken up by text (lets say I was trying to figure out how many pages I could get out of an ink cartridge based on the page yield at 15% coverage). My first thought is to drop it in photoshop rasterized at 400dpi or so, and use the magic wand or cntrl-click the layer to select all the text and open up the expanded histogram palette and read off how many pixels are selected then divide by the total number of pixels in the document to get a percentage of coverage.
This does not work however... the pixel count shows a low number (7000 pixels or so) that obviously isn't right but when I take the magic wand and start selecting character by character the pixel count quickly climbs past the original low number so obviously something isn't right.
I'm using Photoshop CS. I want to make a text, and then I press the enter button. But, instead of a second paragraph, the text overlays. How can I solve this problem?
View 4 Replies View RelatedI pull sliders in levels, the image goes totally pixelated. then retruns to normal as release slider. anyone else heard of this?
View 6 Replies View Relateda while back i had this problem where pictures wher looking funny when blurred but never realy had an answer this is what i am talking about [URL}...
Now i took this with my phone because when i take a screenshot people say the picture looks fine ,I have tried alot of things but i can't fix it here is a picture of it as a ascreenshot [URL]...want a fix for this as most of my pictures become crap when i try to make something nice in photoshop !
From time to time, when either moving text with a grip, or placing a dimension, or drawing a line or whatever, AutoCAD just randomly decides to snap to zero, zero. I might be miles away from zero, zero, but it still snap me there. The only way I can get around it is to turn my OSNAP off, do what I have to do and then turn it back on again. REALLY annoying. I'm using ACAD 2008, but I remember having this problem on earlier releases too.
View 3 Replies View RelatedI'm looking to do a simple 3D ribbon with text mapped onto it.
Using the pen tool I made a line with slight curves to it, then 3D > Extrude/Bevel.
The end result added 'volume' to my ribbon. See here:[URL]....
The parts with Green X's on them are what i'd like to get rid of, so that it's basically a wide ribbon with minimal 'thickness'.
I'm using Illustrator CS5 on Windows 7.
I am trying to create a grading in Civil3D 2012, for a stormwater pond design. The sides have a 3:1 slope, and on one side the pond follows natural pre-existing contours, and on the other side there is a construted dam. When I created the grading, the generated feature line has some crazy spikes that are >10000' high. The slopes all look fine, it's just the feature line thats wacky, but it won't let me edit it because its part of a grading, and if I delete it, the pond goes too. In the attached screen shot, the green suface is my existing ground, the blue is my pond, and the white is the problem feature line.
View 4 Replies View Relatedi have some blocks have a rectangle rounded, there is a an arrow on that rectangle by clicking on it, it will do invert which will make the blockk dispear as if u doing a crop for an image but this time is a block is that normal.
View 9 Replies View RelatedI have a weird problem when printing from Illustrator CS4, i get a symmetric linie at the bottom of the page in the same color as the star i am printing, and the color of the line changes when i change the color of the star ?
View 9 Replies View RelatedWeird audio noise after encoding for Mpeg for Blu-ray.
It's random and does not happen all the time. Started to do it after I update the latest Premiere CC.
Seems to happen when i apply a transistion to a audio clip from no audio. Sound like a mic to close to a speaker repeating the sound faster and faster. I cant hear it durning the editing, just after exporting.