Photoshop :: Paper Printable Area
Feb 2, 2006I almost print a picture from PS prograss when I saw that image is too large and the paper's printable area some clipping will occur. Is it ok to click on it and do I put the smaller size.
View 6 Replies
ADVERTISEMENT
AutoCad :: Change Printable Area Of Custom Paper Sizes
Mar 21, 2012Trying to change the printable area of custom paper sizes?
I've plotter that allows me to create 5 custom paper sizes for each pc3 file, however after create them, i cant always access to change their printable area, you know adjusting their margins, and the strange thing is that this error doesn’t happen all the time,sometimes after a while trying they work, but just for a couple of times, after that the problem remains.
autocad.png
To be more clear, you can see on the image that it doesn’t recognize the custom paper size i have selected, however it works from time to time, allowing me to edit those margins, and after save them, they work just fine and i can use those paper sizes with no problems.
I've tried to edit the pc3 file through windows, and a message appears saying that an unknown error has occurred.
AutoCAD Print / Plot :: Changing Printable Area Changes Paper Output Size?
Sep 28, 2010Using an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies View RelatedAutoCad :: Printable Area For DWG To PDF?
Nov 17, 2012I am aware that the dashed line in paper space represents the printable area for the type of plotter that is being used. Now... While in page setup when plotting dwg to pdf (on the same type of paper, ISO A3) the printable area border is different for every dwg. Sometimes it is right next to the paper border 1-2mm offset, and other times a good 2-3cm. I tried to resolve this but failed. New to the paper space and the whole plotting experience. So the questions are:
1. What is the printable area in dwg to pdf, what is it for?
2. Can i change the dimensions and position of the area when doing dwg to pdf, or when using other plotters?
3. Why is the area different for every dwg file when plotting dwg to pdf?
AutoCad :: Size Of Printable Area On A1 And A3?
Sep 14, 2012How big the printable area is on a A1 and A3?
Is that standard measurements or can that be set up individually?
AutoCad :: How To Expand Printable Area
Jan 17, 2013How do expand my printable area? I'd like the border of my drawing to be about 1/4" from the edge of the paper but it gets cut off at about 3/4" away.
View 7 Replies View RelatedAutoCAD Architecture :: Printable Area In Layout
Mar 16, 2011When I make a new Layout a new Page Setup called *Layout1* is created and assigned to the new Layout. Our plotter is assigned as the plot device, and a dashed rectangle showing printable area appears near the borders of the white sheet area represented in the Layout.
If I choose to Modify the layout, and I change the Paper size, the dashed rectangle disappears, and now I don't know how to position and size a title block to ensure that it stays within the printable area. What controls the presence of the dashed print area rectangle?
AutoCad 2D :: Disable Display Printable Area In Mac?
Apr 14, 2011We, the company, have been wording with AutoCad for ages now. All in the trusted Windows version. But the Mac is rising! And a couple of our partimers have bought Mac systems. All good and well when they still use the Windows version of AutoCad, but when AutoDesk released the Mac version, they dove on it like lions on a slow moving prey. Still that´s ok. But we work with a Windows based template. Complete with all the layers and pre/set blocks and with pre set pages. We have all the pages from A0 down to A4 format lined up in one paperspacetab. (We use single viewports to fill the pages)
This works awsomely fast and easy, when you disable the 'display prinable area' function. Now the mac-users also want to remove the printable area, so I take a look and: WFT happend to AutoCad?!?, why do they have a Coca-Cola-Zero version of the AutoCad (=Less options than the light version).
Any way to remove the prinable area? Is it posible, or do we have to work around it?
CorelDRAW Graphics Suite X5 :: Show Printable Area
May 10, 2012I often toggle between Portrait and Landscape when I begin working out a layout. Is there an easy way to make the Printable Area dotted lines automatically follow suit? My printer's default is already set to "Match Orientation".
Up till now I have been going to File>Print Setup>Preferences>Layout>Portrait or Landscape for each and every toggle!
AutoCAD LT :: 2014 - Printable Area Different Between Publish And Plotting
Oct 3, 2013My layout is 11x17 and within the printable area displayed. Page setup is 11x17, Landscape But my layout gets cut off when Publishing to PDF. But is OK when Plotting PDF. I found an earlier post talking about PDF scaling having to be set to None. I found a scale setting in my CutePDF Writer that is set to 100%. There is not a None selection.
Another interesting observation is that Publishing will print the sheet upright. Plotting prints the layout rotated -90.
I am using Publish to print multiple layouts to one file.
AutoCAD 2010 :: Why Is The Printable Area Bigger Than Sheet
Nov 30, 2012I have an 11 x 17 border (true). I am printing on an 11 x 17 sheet (true). I have specified 11 x 17 sheet in plot dialogue box.
SO WHY IS MY PRINTABLE AREA 11.5 X 17.5??
i have established LIMITS at the corners of my border. there is nothing else outside the border.
this is for a template. i would like to establish the 11 x17 LAYOUT and lock it in position, never to be changed again. If someone wants to print a portion or outside they can use WINDOW, or EXTENTS, but, when LAYOUT is selected i want to see an 11 x17 rectangle eliminating from the 0,0 point and nothing else.
AutoCAD Print / Plot :: Objects Outside Printable Area
Mar 15, 2013Is there a setting that you can turn on that will ignore objects (texts, lines, ect.) that are outside the printable area? If objects are to be placed "outside the box" my titleblock gets inadvertently shifted until the objects are deleted?
View 5 Replies View RelatedAutoCAD 2010 :: Cannot Center Drawing In Printable Area
Nov 9, 2011Plotting to layout (as opposed to extents or window) is infuriating. I cannot get my drawing to center properly within the printable area, and I can find no consistency on how AutoCAD is offsetting my drawing. My titleblock is drawn with a trim line of 22x34". I choose the ANSI D sheet size which is 22x34" and when I preview the plot the bottom left corner is offset from the bottom left corner of the printable area by .25, .25.
If I delete the 22x34 trim line from my titbleblock and replace it with a simple point at the 0, 0 bottom left corner, then when I check the layout and printable area, the point shows up offset from the bottom left corner of the printable area by .0006, .0016. Why is it any different than when a line was drawn? If I delete the point the offset from the bottom left corner of the printable area to the closest drawn element then becomes .0013, .0012.
This is absolutely ridiculous. I want to batch plot and I want to have proper margins, but it seems nothing renders consistently and I am stuck with ill-formatted plots. I would love to batch plot to extents, but as I go through the setup, that is not an option for me, so I appear to be stuck with the layout, which I have never gotten to work properly since it was introduced. What is the trick to make it work?
I am just printing to Adobe PDF with the Acrobat printer.
AutoCad :: Printable Area Margins Went Back To Default?
Sep 7, 2011Reinstalled autocad and the printable area margins went back to default.
View 1 Replies View RelatedAutoCad :: Border Size - Printable Area Right Scale
May 18, 2011I set a border up to be 24"x36" and it appears to be slightly outside the dotted lines for paper space when I x-ref it in. I also noticed on my plots that 3'-0" is measuring close to 3'-1" which means I have screwed something up.
I have the plot settings set to "Extents", "1:1" and I am using the Cute PDF plot driver.
Instead of creating a border that is 24"x36" do I need to create one that is exact to the printable area to make it the right scale? Not sure what the printable area is or how I figure it out though. Lost.
AutoCAD 2013 :: Plotting Causes All Viewports To Move Into Non Printable Area Of Paperspace
Oct 29, 2012A few times out of each day when I plot all of my viewports will be moved of the printable area into the gray area below in paperspace.
I cannot figure this out as I have used a few different profiles from different machines and still have the same issue.
AutoCAD 2013 :: Toggle From Paper Space Into Same Zoomed Area Within Model Space
Oct 5, 2013Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedPhotoshop :: Epson Printable DVD?
Sep 24, 2008I bought an Epson R280 printer that can print directly on the DVD. But when I try to print from Photoshop, it always comes out off centre.
I tried to print using the software that came with the printer which worked perfectly. But I prefer to use Adobe (photoshop,encore, etc.). Has anyone else had similar problems or know of solutions?
Photoshop Elements :: How To Print 11x14 Paper It Will Not Allow Custom Paper Size
Oct 16, 2012I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedPhotoshop :: Curl Paper Effect And Paste Image On Paper
Nov 10, 2004I'm using version 7, I'm trying to create a curled paper effect then paste an image on the "paper". A couple of web sites suggested creating a rectangle then create a path or something like that and then using the pen tool and the "handles" manipulate the corners. I'm not sure if I have the terminology correct but the problem is that when I create the rectangle and go to add the path (the icon looks like a circle with handles on it) it's grayed out and can not be selected and manually creating a path with the pen tool doesn't work.
View 5 Replies View RelatedPhotoshop Elements :: How To Set Paper Size For A H 30 Cm X W 80 Cm Image Using Roll Paper
Feb 19, 2013Q I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedPhotoshop Elements :: How To Create Printable (PDF) Text File In 7
Dec 1, 2012Using slide show format it is possible to create a text file for use in the slide show. Is it possible to print that file (Slide)? How?
View 3 Replies View RelatedPhotoshop Elements :: Can't Get Cropped Images Into Printable Sizes
Jul 23, 2013I am fairly new to elements and I am having problems with resizing my images. I have cropped some images and want to upload them to say 'photobox' but I can't seem to get the images into the correct size for printing I.e 6x4, 7x5 etc. I have also noticed that I start with an image that is say 7mb in size yet when it has been edited and uploaded it is 700k and rated as a medium quality image ?
View 1 Replies View RelatedAutoCAD Map 3D :: Do Themes Styles Not Printable?
Nov 25, 2008I exported and re-data connected a polyline to be able to use the transparency style features of map. I can see it on my screen just fine but it will not plot out as such. Are the styles in map only for visual on screen and not printable?
View 5 Replies View RelatedLightroom :: Print 11 X 17 Paper On Epson R2880 In Image Printing Before Leading Edge Of Paper
Aug 3, 2013When I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies View RelatedAutoCAD Civil 3D :: Printable Doc / Chart Of Pen Settings
Nov 21, 2013Where I can find a printable doc/chart of the pen settings, with their colours and pen widths ?
View 2 Replies View RelatedGIMP :: Printable User Manual For Windows
Sep 11, 2013I still consider myself a newby to Gimp and have just downloaded the new 2.8, how I can download a printable version pf the user manual for this?
View 3 Replies View RelatedIllustrator :: How To Create PRINTABLE Wallpaper Pattern
Oct 10, 2013I am fluent in Photoshop and semi fluent in Illustrator. I run CS6 for both.
No what I want to be able to do is create a repeating pattern that can then be printed as wallpaper and pasted to the wall. As you can imagine there are lots of hurdles to get your head round and I can find any support anywhere.
Traditional wallpaper is 53cm wide by 10metres long per roll.
The wallpaper will have either a 1/4 or 1/2 drop.
I need the pattern to repeat seamlessly top and bottom and left and right because its wallpaper! I have been experimenting with the pattern tool in illustrator but with no real luck. I can create a pattern that drops by 1/4 or 1/2 but it gets all weird on the vertical repeat so its unusable.
GIMP :: How To Increase Pixels / Create Printable Graphic
Oct 10, 2012The attached graphic, which came from a book on archive.org was originally 520 x 721 pixels. The same graphic was enhanced and increased to 1185 x 1600 pixels (the other attachment). It's clear and bright, and hasn't lost any detail. How this is done?
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Export To PDF Hidden (but Printable) Layer
Mar 8, 2011I want to create a watermark layer that is hidden (non visible), but is "printable" so it shows when I export to PDF.I can only get it to display is I show (make visible) that layer.
View 10 Replies View RelatedPaint Shop Pro :: Print Image On DVD With White Printable Surface?
Jul 17, 2013I want to print an image on a DVD with a white printable surface in PSPro x.I want to be able to gradually feather the white edge given to the image (what is the best way to do this) so that it blends into the white background of the disc and therefore the square edges of the image do not show.
View 11 Replies View Related