is there a button you can press that will enable you to completely move your entire path when you are in the add anchor point mode? I know the move tool will do it, but I need a release button for it...
View 2 Repliesif there is a quick key to turn a path into a selection without having to go to the path's palate?
View 3 Replies View RelatedDo a quick print screen of support file search path? Our computer's are set up by an outside source and I believe they did not migrate anything correctly or did something incorrectly. My issue specifically is anything to do with rendering and materials displaying is not working. I just want to make sure ACAD 2013 is looking at all the standard file locations along with our customization files. This is happening on 2 computers that have 2013 installed, all the rest are still using 2012 and this works fine. I tried exporting that profile, but still nothing works for rendering.
View 2 Replies View RelatedLevel: Newbie OS: Windows 7 64bit Ps: Cs6
So, I have a layer which I made a rounded rectangle and then used ctrl + alt + t to transform and set it to 30 degrees and used alt + drag on the transformation pivot point
then I used ctrl + alt + shift + t to duplicate the rounded rectangle around that point and then ... I relocated this layer above an other layer w/a circle on it and used ctrl + alt + g to create a clipping mask
Now ... is where I am stuck ...
I'm suppose to "split each path into a separate layer" .... um. what?
Okay, I realize that each of the rounded rectangles has its own path ... but how to go about putting each one on a separate layer and I cannot find it in the manual
I've been using Photoshop since it first came out, and need to brush up on some things. I can't remember how to move an image and it's path to a new photoshop file at the same time.
View 3 Replies View RelatedI need to cut a part of one path and paste it as a part of another path. Is there a way in GIMP for doing this? Currenty, all what I can do is to select required anchors of the source path. Then, all I can do with this selection is moving it as a whole. The commands "Copy path" and "Paste path" ignore selection and work with entire path.
View 2 Replies View RelatedI have a roller pin which follows a certain path using transitional constrain in an assembly. A box is attached to the roller pin which move along with it. My problem is that I want one face of the box to be tangent to the path which the roller pin is following so that the box moves according when it is on the curve. I have attached the file with the message.
View 2 Replies View RelatedI am trying to move a free camera along a path... but the 'target' not moving with it.
Is that correct even tho it does not have a 'target'?
To get camera & target to move together, do I need to move them both individually?
3ds Max Design 2012
It would be nice if there was a way to import all the Move Path settings for a project from an Excel-type spread sheet. It would reduce the irksome data input errors that I seem to make all too often. Plus, you could use the power of the spreadsheet to calculate different points/frames.
View 3 Replies View RelatedAll I am trying to do is move an anchor from one location to another using vbscript. I have searched everywhere and scoured the scripting references but I have not been able to figure this out as of yet.
I am able to select anchor points without an issue....moving those points seems to be a problem.
Windows XP/Sp3 - Gimp 2.6.10 - Gap 2.6
I readily admit that I have another thread open where I mention this issue. However, that thread mainly addresses another issue. The problem that I address, here, is holding up progress on the other and I believe it to be unique enough to warrant an independent thread.Here's what is going on:
-I am attempting to have text travel along a path.
-I am using the proper procedure to save the background frame as _000001. and duplicating way more frames than I am using path points.
-I am using the proper procedure to create my text letters in a separate source image.xcf file.
-My RGB settings match up.
-I am activating the background layer in _00001.
-I am using the proper move path procedures and operator settings.
-My From and To frame assignments are less than the number of frames.
-Whenever I Refresh, or OK, the move path function, I get a Move Path Message stating the selected path points are different than the number of frames and I either need to adjust the number of path points I am using, or change the number of frames.
I have spent hours researching this. The only two issues I see mentioned are to make sure that the RGB's match up and that I am using the background layer of the _00001 file.I see that there was a patch for this condition on early versions of Gimp/Gap. I wonder if it could be reoccurring.
there's nothing in that dropdown menu for you to select your source image/layer in the Move Path plugin.I am using an XCF (Gimp) file, with many layers. I selected a particular layer, then I opened the Move Path plugin.
View 2 Replies View RelatedI try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedI am using the trial version of CS5 (probably going to upgrade at the end of the trial), and I've only found one thing about it that I don't like more than CS3. This is VERY VERY annoying, and I'm not sure if it's a glitch, or just a preference that needs to be reset:
When using the move tool, I will move something and it will just snap back to where it originally was. When it snaps back, it might move a few pixels over in the direction I was dragging, but it is definitely not moving to where I want it to go. The only way to get things to move the way I want to is by Free Transform...but it's annoying, when you're trying to design a layout, to have to free transform every element you want to move, first.
I'm guessing that this is a glitch because sometimes it happens and sometimes it doesn't...it's pretty random. I've tried turning Snap on and off, and nothing changes.
I'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
Having made a (ex circular) closed path within a (ex square) path, I want to turn this into a selection in which the inner circle is omitted from the selection. But when choosing "Make Selection", only the first option,"New Selection" is available, the other three are grey (Add to, Subtract from and Intersect).
This used to work in CS7,
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View RelatedI want to put type on a perfect circular path.But first I need to stretch the type so it is longer vertically.Stretching type and using it as normal is easy.But how in the world do I use the stretched type on a path?
View 2 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
How to use touch move and mouse move events events to move elements n edge?
View 4 Replies View RelatedActually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
I have a bunch of material libraries that need to be re-pathed as I have moved my textures, the Bitmap/Photometric paths editor has a tickbox that says "include material library" which leads me to believe that it will list, for re-pathing, all materials in my library.
However, it doesn't seem to do anything for me even though the library i need to re-path is loaded into my Material/map browser.
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View Related