As we know, HDR files are 32-bit floating point type files ... and you also know that we can have 4.294.967.296 different tones in a 32 bit integer file. how many tone levels we can save with a HDR file?
View 2 RepliesThe smaller windows that come up such as those for adjusting the levels, brightness/contrast, etc. moved little by little each time I used them, but I never paid attention until my Levels window moved so far up when it opens to its default location that I can't get to the top of it to move it anywhere. This has happened to a couple other windows for me, and I can't figure out how to fix it! I tried resetting the workspace, changing resolutions back and forth, restarting.
View 4 Replies View RelatedCurrently I'm trying to save an own "tone curve" but in the menu no entry to save it appears. In my understanding an entry "Eigene" (or "Own") should appear as soon as I am changing the tone curve manualy.
I am using the latest version of Lightroom 3.6 running under Windows 7 64-bit (both in German) with Camera RAW 6.7 installed.
On my previous version of Photoshop (CS4) when I saved a PSD file as JPEG Level 8, 10 or whatever, the file size in megabytes was then shown. I presume I can configure Photoshop CS5 to do this but I'm just not sure how.
View 8 Replies View RelatedI created a custom Tone Curve in LR3.6 on Win7 64-bit as an XMP file, changing the default location to another folder. I right click on the Custom <> icon and can see the Save feature and some preset curves, but not the Tone Curve I saved that I called "Backlit Tone Curve.xmp." Do I have to move it to a special folder in the presets directory? I restarted LR and it still did not show up anywhere.
View 5 Replies View RelatedI need to edit mipmap levels of DDS file. How i can do that?
View 2 Replies View RelatedHow do I create Multiple Levels in a single Drawing File
View 4 Replies View RelatedURL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies View RelatedFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View Relatedwhen im about to save my file *project* nothings happen
View 2 Replies View Related[CS6 Extended]I want to click with the mouse on a symbol (normally it should be I disk symbol I think) to save mychanges instead of use of File->Save or Ctrl+S.
But the problem: I can't find a disk/save symbol in Photoshop andalso don't know how can I get it.On "Window" menu I can't get a word "Save" to checkmark it.How can I get a "Save" symbol in Photoshop CS6 Extended?
I have a number of PSD files I've created and I'm trying to save them as PDFs. I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. How/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedSave PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies View RelatedI did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies View RelatedI am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies View RelatedI save a lot of files to "save for web". After saving PS asks if I want to save changes to the original file. I never want to save the changes to the original. Since the default is to change the file I am afraid I will accidentally OK the change without wanting to. I would like it to stop asking and just not save it. Is there a way?
View 5 Replies View RelatedI just had a question about the slice tool. Is there anyway I can save slices I make to one .psd file so they can be applied to another .psd file?
For example with these two layouts (2 images):
If I could apply some certain slices to the first one, it would be nice to automatically be able to apply them to the second.
When i try saving something it comes up with could not save as (file name) because the file could not be found and need to save this file.
im using photoshop cs5.1.
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedI found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
I'm using the file dialog snippet as the foundation for a save as dialog box for saving a new copy of my template assembly to a project folder. Is there a way to disable the ability to click on a file in the window which puts that filename in the input box? The assembly file name is standardized and pre-"calculated" by my code and its a decent hassle if you accidentally click another file because the user would either have to rewrite the file name by hand, or cancel out of the dialog box and re-navigate to the project folder.
Inventor 2013 SP 1.1
How to even out the skin color, I have a picture of a model, unfortunately due to light and make up and her skin color the color of her face and her hands and body don't match, I think I saw a video on youtube where the skin color was evened out throughout the picture from raw I think this was done on bridge but I am not sure. How to even out the skin color either on PS or bridge?
I currently have CS5 on a win 7 pc.
if there was a way to create a brush that half was the foreground color and half was the background color...
for example, I have a mountian brush. and the shadow of the mountian is black, as is the outline, but alot on the inside is white. Since its white, when i use the brush, if they overlap, you can see through the mountian... not exactly what i was going for. So, any way to use 2 colors? or make the brush sold without making it all back? I tried a shade of grey, but that just creates an lighter opacity of the forground color, and the FG/BG jitter just chages the color of what was originally black.
How do I create that two-tone effect (on the people)?
View 7 Replies View Relatedi've been trying to immitate this effect eversince i learned Photoshop but i can't seem to get it right do you guys know how?
View 3 Replies View RelatedHow I can remove orange tone of a photo taken by night? A random example from google images:
View 1 Replies View Relatedi have an image half the image is much brighter than the other half, i do not mean the sun is shining in one half anf the other is in shade, the image has a fault, a third of it is a diagonal strip like brushing the dodge tool over part of an image, i would like the image to be the same shade an colour and brightness, or near as i can, i have tried using the mask tool and dodge tool but it is quite messy,
View 1 Replies View Relatedif i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?