Photoshop :: Wacom Tablet And Dual Monitors
Sep 5, 2008
I read something about a fellow who uses the 6x8 Wacom on his wide screen monitor, but had to adjust the position of his image so he could access the whole image with the Wacom. (I think he was lamenting about not springing for the 6x11 Wide Format Wacom instead of 6x8, which would have covered his whole screen surface.)
My concern is that neither the 6x8 nor 6x11 will work "well" for me on dual monitors. I usually have the main Ps window with editing image on one monitor, and the palettes on the second monitor. (I do this with Illustrator and Fireworks as well.) I'm concerned that I'll be stuck with "use the mouse to access palettes" / "use the Wacom to draw", wasting my time switching between the two, and benefiting little from either.
View 9 Replies
ADVERTISEMENT
Nov 2, 2012
I'm looking to get a wacom tablet, but I'm not really sure what tablet it best for digital art and animation type stuff. I'll be using it with Photoshop CS6 and probably Toon Boom or some other animation software. I'm just not sure what the difference is between the tablets.
View 3 Replies
View Related
Jan 10, 2004
Does photoshop support dual monitors?
View 6 Replies
View Related
Aug 28, 2008
I have recently purchased new HP laptop 320/4g/2.6, Windows Vista, and have an additional Samsung Monitor - T240 24" - I will be using Photoshop CS3, switching from Photoshop Elements6, and would like to know how I get Photoshop to recognize that I am using two monitors. I am also using Lightroom 2.0 and have no problem displaying a photo on the Samsung with it. What am I missing in Photoshop?
View 8 Replies
View Related
Apr 17, 2009
recently my 2nd monitor quit working in cs3. it works fine in LR2 and mail, but not photoshop. i run a mac pro w/leopard 10.5. this has brought my editing to a standstill.
View 1 Replies
View Related
Apr 13, 2009
I have twin monitors set up the defualt way whereby they act as two seperate monitors for two seperate applications to be maximized in and such. Basically, what happenes, is if i put Photoshop onto the secondary monitor, and create a new canvas, or have an open one, it does somthing similar to this: (picture attatched). Any reason or way to stop this? It doesnt do it if i strech the program over both screens but thats not practical for the obvious fault left in the middle.
View 14 Replies
View Related
Mar 9, 2006
to go with a dual monitor set up. I am looking at the Diamond 9550, 128 MB card. With the rebate it comes to a more than reasonable $69.00. Is anyone using this card? I would appreciate any comments from those of you that use a double dual monitors set up.
View 2 Replies
View Related
Feb 19, 2006
I have an extra monitor and I would like to use Photoshop with 2 monitors. The dual video cards vary in cost from 50 -400 dollars. Since I am not a professional I certainly don't need a state of the art set up. I have searched this forum and have been unable to find any useful information although I do remember that some pass treads did discuss this topic.
View 4 Replies
View Related
Feb 9, 2012
IThis was pulled from the Mac forum (URl....), however I am having the exact same problem on a PC running CS5.
Â
When I "let go" of the "work area" window on the LCD monitor it rather visibly changes the color tonality (so much so that white turns yellow). When I release the image, why is Photoshop altering the color space - when other programs display evenly across the monitors? Am I to assume that releasing the image triggers the second monitors profile? Maybe I simply need to use the same profile for both monitors (which would be strange because this was a problem before I assigned any, and is still a problem after running calibration)?
Â
I've been using Photoshop for years and never encountered this before, however this is the first time I've added a LCD monitor into the mix, as my old Viewsonic finally died. I will be replacing the other monitor with a LCD in the near future, it will be interesting to see if the problem magically resolves (assuming I can't figure it out in the meantime)
Â
It would have made more sense to simply be able to flag a post as pertaining to both operating systems, and thereby have it appear in both threads. That way you're not burdening everyone with threads that do not apply, and you're not losing all of the old threads (which are now read-only for some reason).
View 39 Replies
View Related
Aug 24, 2012
I'm losing my mind trying to work on IllyCS6 with dual monitors. when i switch around between programs on different monitors, Illustrator seems to mistakenly think I am dragging it from one screen to another and it keeps jumping back and forth.
View 2 Replies
View Related
May 20, 2013
Is it possible to move perspective or another view to a second monitor in 3D modeling?
View 7 Replies
View Related
Oct 23, 2012
I'm using Win7 with LR4 and have dual monitors. When i switch to the second monitor in LR4 it then displays both LR4 windows on both monitors. In other words it just shows the same thing on each monitor.
View 1 Replies
View Related
Feb 8, 2012
if it's possible to span the compare mode across two monitors, so the curent select is on the left, and the candidate is on the right?
View 3 Replies
View Related
May 12, 2012
Is there a way, when using dual monitors, to move the whole CS6 frame to either monitor? Right now it's just cemented to my left monitor, and I want it on the right.
View 6 Replies
View Related
Oct 18, 2012
I'm having problems with lightroom 4.2 crashing in develop when using two monitors. I cant seem to make it crash in any other module with both monitors active, or make it crash in develop with only one monitor. I have tried updating all drivers (graphics etc) along with uninstalling wacom tablet driver which I read somewhere could have an effect. My system is:
Â
WIndow 7 pro 64 bit
Â
nVidia GTX 285 1gb graphics card
Â
Gigabyte GA-EX58-Extreme motherboard
Â
12gb Corsair memory
Â
Core i7 975 Extreme processor
Â
Have also tried clean install with just lightroom and cs6 but to no avail.
View 10 Replies
View Related
Dec 18, 2013
Info:
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
When I section a view and edit the hatches, the 'Edit Hatch Pattern' window always opens off-screen. Â I have changed the settings in the GPU control panel to have everything open on the last window, but this window will not abide. Â I move the window to the Inventor window (monitor 2), but it will re-open back to monitor 1 in the exact same position every time.
The 'Edit Hatch Pattern' window seems to be the only window that does this in Inventor. Â Attached is a screen cap of the issue. Â The window opens in the same place each time.
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
View 1 Replies
View Related
Jan 9, 2014
I've been running dual monitors (22" and a 18") for a while, but I just upgraded to a larger second monitor (now both 22"). Before, I left AutoCAD running in the main monitor, but now I've switched it to run in the second monitor instead. Now AutoCAD will not remember the position or size of the Open and Save dialog boxes while it is in the second monitor. Sometimes it throws them back into the main monitor and other times they show up in the second but without the resize I did previously.Â
View 1 Replies
View Related
Jun 13, 2012
I am on the creative cloud and have down loaded and successfully installed PS6. I am a professional illustrator and use the Wacom tablet. My concern is with the pen pressure effect not staying on. I have went to option on PS6 and checked for updates and down loaded them with no results and called support as well .
I went to the Wacom sit as well to check to if my drivers are updated and they are, and called their support as well with no results. I understand that PS6 is a new product and that I may have to wait for patches, that is fine.
View 9 Replies
View Related
Jun 9, 2008
I have a chance to get a small Wacom tablet, its a older version ,screen size 4x5, It comes with all the software, Also has Elements 2.0 My question is,can I also use it with CS3?
View 3 Replies
View Related
Oct 16, 2008
I was using a wacom tablet in adobe cs3 just fine, now I get no tip sensitivity. As in, the pen will always draw a think line no matter how light I use the pen.
View 4 Replies
View Related
Jun 18, 2008
I use my Wacom Saphire CTE 430 for all my software. Recently I decided to move from Corel PhotoPaint to CS3. However, I am experiencing a very strange problem. If I use the mouse none of the photo shop paint tools work. If I use the pen the paint tools work but others do not. At first I thought is was my ignorance of PS and that I just needed to configure something. I eventually discovered that if I disconnect the tablet Photoshop works fine. I have downloaded and installed the latest Wacom Vista drivers as suggested by Wacom but it has not fixed the problem. PS is the ONLY program experiencing problems with the tablet. I run AutoCad 2008, Sketchup Pro and CorelDRAW X3 suite and they work flawlessly.
View 1 Replies
View Related
Jun 12, 2008
I'm currently using Adobe Photoshop CS3 on Windows XP with an Wacom Intuos 3 tablet.
The problem I'm having is that when I use the tablet pen to click anywhere in
Photoshop, the cursor essentially locks in place and does not move. On the canvas, this means I can only place dots. This happens whether I'm clicking on tools, scrollbars, etc...
I used to be able to use it fine in CS2, but then it stopped working on day, and I thought that maybe upgrading would solve the issue. However, this has just left me with the same issue.
The pen does work normally in all other programs, such as in MS Paint or when clicking and dragging to select icons on the desktop. Also, clicking and dragging with a mouse works normally.
View 4 Replies
View Related
Dec 14, 2008
I have Wacom Bamboo Fun with latest drivers, use Vista 64 and run PS in 64bit mode. I uninstalled CS3 before installing CS4. The tablet worked in CS3 as expected, but CS4 ignored pen pressure - it always worked like mouse - with maximum pressure. In order to fix this problem I uninstalled and reinstalled Wacom drivers and cleared PS preferences by starting PS with Alt-Ctrl-Shift. Now Photoshop ignores the tablet completely - the cursor won't move and I need to use mouse to navigate in Photoshop.
View 4 Replies
View Related
Oct 17, 2008
Just been fiddling about with cs4 and realised there is no pressure sensitivity in the brushes -
It does it with the previous and latest driver.
View 39 Replies
View Related
Nov 25, 2008
Well, I just hooked up my old Bamboo tablet (the medium size) and downloaded
the new drivers. The reports of issues with the pen tablet are well founded.
For me I have several issues...
1. If you press to hard on the pen you get this animated ring and then a
brush adjustment dialog pops up. I hate this thing but can't figure out how
to turn it off. If this is supposed to be useful it isn't at least not for
me, it is so annoying. I don't know if this is a Photoshop thing or a Wacom
thing but I hate it. If anyone knows of a way to turn this off please let me
know.
2. The brush is very choppy when you are painting, etc. What I have noticed
however is that as you paint even if you never pull the pen from the tablet
surface Photoshop is creating dozens of history states as it does this
Photoshop must be doing something with memory or scratch space because it is
during the rapid creation of history states that it causes the pen to pause
making it seem choppy. I have no idea why Adobe would set it up this way.
When I create a single stroke no matter how much area I cover that should be
one history state and not dozens.
View 1 Replies
View Related
Mar 20, 2012
Is it possible to use a laptop with a Wacom Cintiq 24HD as a dual monitor setup for Photoshop.....?
View 3 Replies
View Related
Feb 26, 2012
My Intuos 3 tablet and pen do not perform correctly using CS5. The same machine, using the same tablet and pen and the same brush, with CS3Â and Corel Painter function correctly so I am assuming it's CS5 that's the problem. The brush seems to set an anchor point where the pen first contacts the tablet, then no matter where you draw with the brush nothing happens until the pen is lifted, then a straight line is drawn from the anchor point to the point where the pen lifted. Problem is with CS5 x32 and x64 both. Happens every brush stroke. Mouse works fine. Reset the preference file. Upgraded drivers for the tablet. The machine is an HP, quad core processor, 8 GB ram, with an ATI Radeon HD 3200 Graphics card. The machine came loaded with Vista 64 and I upgraded to Windows 7 at the time I installed CS5.
View 9 Replies
View Related
Jul 20, 2012
I am 65 yrs young and use the Lasso Tool,Polygonal and Magnetic tools with a mouse.I just cannot control the outline area definition as precise as shown in all the tutorials. The "walking ants" are always screwed up and all over the place! Also, holding down the mouse button and scrolling the track ball is very hard for my hands.
Â
Will a Wacon tablet w/pencil provide a better manipulation of PS(CS5&6) functions for outlining areas to be modified?
View 10 Replies
View Related
Feb 18, 2012
Would the Wacom tablet 'Pen and touch' work with CS5?
View 1 Replies
View Related
Sep 23, 2013
I get a LOT of Photoshop CC (64 or 32bit) mouse lag. I do NOT have a wacom tablet or driver (I've searched these forums for solutions). All the other Adobe products work fine.
View 4 Replies
View Related
Jun 21, 2008
I have wandered around the web and found numerous sites with sample drawings using the Wacom in PS. When the demonstrators are doing their bit, they use the whole of the screen for their efforts, even moving up and down into seemingly hidden areas when the drawing requires more space.
May I ask, how can I, when using my Wacom, ensure that I can use the whole of the screen, and not just a part of it. At the moment I select 'New,' and a certain size of paper, which never covers the whole screen and certainly will not permit me to draw beyond the paper limits.
View 8 Replies
View Related
