I shot my first digital wedding this week and want to make the same changes too all 300 images in the folder: Auto Levels, Auto Contrast, Auto Color, Unsharp Mask, and then save them numbered 1 through 300 to a new folder. Can sombody please? please? walk me through this. I'm new to Photoshop CS and am working off a MAC G4. The files are regular jpgs in a folder on the desktop.
View 3 RepliesWhat I tried to do was simply convert RAW files (CR2) to JPEGs. I built an action and invoked it via the batch command. The batch command worked but I got an error message for each of the XMP side-car files which happen to be in the same "source" folder. (I also got an error message for the "bridgesort" file that the Bridge placed in the source folder.) Of course, I could delete the XMPs but that would undo the edits to the raw files.
My action simply opens the raw file and then does a "save as" to JPEG. The raw files need to retain the editing that is contained in the XMP side car.
The only alternative that I know of is to bring the raw files into photoshop manually and then perform the action manually. This would work (i.e., I would end up with a raw file converted to a JPEG file) but there are 600 images and it would take me a VERY long time to do them one at a time.
Is there a way to do this via the batch command or some other automated command?
The Batch Command in CS5 is greyed out. I am running CS5 64 bit with Windows 7 64-bit. It was working and now it does not.
View 3 Replies View RelatedSuddenly I get the Message: Command "Batch" is currently unavailable. I have CS6 Creative Cloud single-app membership.
View 3 Replies View RelatedSuddenly when I select multiple images in Bridge, then go to Tools>Photoshop>Batch, I get the message "The command "Batch" is currently unavailable." Batch is also greyed out in Automate. This occurs when no other processes are happening. What could it be? Batch command has always worked fine in the past.
View 3 Replies View RelatedBridge opens a copy of PS (cs6) whenever I try to use that command. I've done everything from re-installing to reset all settings.
View 6 Replies View RelatedI have a bunch of pictures in a folder, and lots of sub folders inside that folder with picture too. I made an action that has a filter, and a save command.
When I try it on that folder, it overwrites the pictures and while it does a batch on the sub folders, it throws it back in the main folder.
What I would like instead: I want to do the command on all the pictures, but I want Photoshop to create a duplicate folder (named slightly differently if able) inside my own folder and sub folders with the filtered images.
Say I have 2 folders here, I want Photoshop to go into "batch test main folder", then dive into the sub folders, make a new folder within that pictures1 folder, named Filter Pictures or something, and throw all the filtered images from Pictures 1 in there without harming them. Then go to Pictures 2, make a new sub folder in there too etc.
I am creating a layout which includes an image file. The base layer is a jpg file and the image needs to be placed ('Place' command) on top of this layer and I call for a couple of other processing steps after that (these extra steps are not shown below). Easy enough to turn this into an action.
>Open (open the bkg image)
>Place (place the subject's image file)
>Set Current Layer (change blend mode of subject image layer)
>Save
>Close
But, when I try to automate this action, the Place command does not work properly. It's because I chose a specific image file to be placed. How do you program an action with a 'wildcard' so that it can be used in batch and process a whole folder of images?
Bug in photoshop creative cloud. When using the "batch" editing feature after 5 images being edited the same way (batch processing) an error code pops up. "Error:not enough ram" and then i have to restart which does the same thing over and over again. Running a quad core i7 1tb hard drive 16gb of memory so there should be no error code. I have done everything from creating new scratch disks off of other hdd's allotting more ram to go to psd (since i can only use 3255mb because of a useless limiter on photoshop) to rebooting computer and nothing works at all.
View 3 Replies View RelatedHow to execute -Overkill command in autocad using batch process.
View 2 Replies View RelatedI am a newbie having trouble getting the sample batch programs to run. I placed simple-unsharp-mask.scm in C:.gimp-2.6scripts and put the .bat file in the E: drive directory with the image file foo.png. When I run the .bat file on my PC running Vista, I get "batch command experienced an execution error." Here is the .bat file:
"C:Program FilesGIMP-2.0ingimp-2.6.exe" -i -b "(simple-unsharp-mask "foo.png" 5.0 0.5 0)" -b "(gimp-quit 0)"
Obviously, I am doing something wrong, but don't have a clue what it is?
I have a question about using Find and Replace in an Action. For a bar chart with negative values, Illustrator will generate the value on the axis using a hyphen (e.g., -1, -2, -3). I would like to change the hyphens to en dashes (–1, –2, –3).
I have 150 graphs, so the easiest way to do this would be to use an batch action on all graphs in a folder. I first flatten the graph and then do a find-and-replace..The trouble is that I get prompted at each find and replace..Of course I can click Find, Replace All, OK, Done each time, but this essentially defeats the purpose of creating an action.
Is it possible to suppress the Find and Replace window and set the action to Replace All without prompting?
i have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies View RelatedI've created an action that uses the save for web dialogue to optimise images for the web. When I use the batch command to process a full folder of images, even though I have "Override action "save as" command" checked, it ignores this and still uses the location that was used when the action was created.
Apparently this is a known issue in CS6 and previous versions but whether this has been fixed in Photoshop CC?
So I have an action that I've been using for the past couple years (?) now that involves opening an image, applying an auto color and auto levels, saving and closing. This has been working for me since probably a couple years ago when I made the action. Yesterday, I was working on a scanning project where I have groups of images in separate folders. I ran the action on the first 2 folders which went fine.
When I got to the 3rd folder all the way up to the last one, PS just loads all the images, does the levels and color then fails to save/close them when done. On one of my folders, it gets through a few of them when it drops the ball and just opens all of them. I'm not sure what's going on as there's no real explanation as to why this is happening.. especially when I've been using this action (and I even made a new action with still no luck). Last week I had about 300 images I had to work with and PS decided to pull this move on me after doing the first 30 of them fine...which is when I first noticed this happening.
To further add, I set my action to show everything step by step and it seems to happen with select images (in some cases, these select images are entirely what is in the folder). With the select images, it is not doing the actions entirely in order. Typically it does it in this manner:
1-Levels
2-Levels
3-Save
4-Close
What I'm now experiencing is this:
2-Levels
1-Levels
(Skips 3 and 4 since it is starting at 2 and working upward).
AutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedI am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.
I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.
I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedI used send command for Export Layout..But the line only executes after exiting command method.
View 9 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View Relatedwithout reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedI want to batch around 2000 files to png.
This is what my batch looks like:
I prefer to use export to web but i have problems with both. This is one of the many options i tried:
Even if i do Destination: save and close it doesn't close the files.
Here are the pdf's (might be still uploading):[URL]....
I need to water mark aboutn 300pictures, from a wedding...Does anyone have a guide on how to do this? I know you go to batch, open the files, and then record what you do, and then it repeats..But Im a bit confused, so does anyone have a guide, or mind making me one on camtasia?
View 2 Replies View RelatedI'm a professional photographer and starting to get a handle on photoshop but I don't learn well from books.
I want to put my copyright on the bottom of my proofs and doing it one at a time is taking to long. I know there is a batch thing but I dont know how to use it.
I have fallen off the learning curve and can't get up! I just bought a new Nikon D70s and have moved the .jpg's to a directory. I want to convert all of them to .tif files to work on, while keeping the original .jpg files intact for archiving. I do not want to make any other modifications to the files at this time. I know how to do them one at a time but I know there is an easier way.
View 3 Replies View RelatedHow can i use subtract area command in area command while using add command , often it happens we click on polyline whose area we did not want to consider. How can i do like this, i re click on that enclosed polyline and the area gets subtracted and the green fill goes away?
View 3 Replies View RelatedWe are possibly going to start shooting volume HDR images. Time will be a factor when shooting 4 locations a day and still having to process. Is there a way to stack the images at the end of the job like an action, then when I get back to the studio, I can tweak the images?
View 2 Replies View RelatedI have about 2300 .eps files that I need to convert to .jpg so they can be used in an online store.
All of the eps files need to be resized to a maximum of 700px wide, coverted to an rgb colorspace, and 72dpi and then saved as a .jpg file
I have been trying to use the actions pallet to record the actions and then run a batch action but to no avail. I have adobe PS CS4.
Below are screenshots of what i have tried to setup. (After this I have about the same amount of .TIFF files that also need converted.)
I am having trouble converting .psd files to .jp2s. When I make the action, in the "save as" box I have to first pick the JPEG 2000 format, then manually change the extension from .jpf to .jp2. The problem is that when I set everything up, the files save with the extension .jpf, because that is the default extension for JPEG 2000, and my manual change is ignored in the replaying of the action.
View 6 Replies View Related