I know you are all going to say "it depends on the lighting" or "there are different skin tones", but I just need a simple starting formula, of which I can edit to work with the lighting. I just need a simple, generic caucasian skin color "Color Balance" formula, which can be applied to a monochromatic image.
View 3 RepliesFirst, a slightly long winded explanation. Shooting the creative family Christmas card this year in a Mini-Cooper (original 60's one). Basically set my lighting up and then shot individual members in the car to post them together. The only snafu - my 20 month old son wasn't exactly cooperating, so the 'good' photograph I have of him is in the drivers seat, and I wanted to move him in between us.
There were a few difficulties here. First, the light changed between originally shooting my wife (windshield was clear), as skies were blue, and when I took the photo of myself nearly an hour later (cloudy skies cast a glare on the windshield. I had a black scrim set up to the side which worked, but wasn't able to knock it out all together. So i faded the clear windshield from my wife's side over to my side with the glare, but I feel that looks fairly natural (or at least good enough for the Christmas card).
The trick comes with my son - I cut him out from where he was at the drivers seat (had to do some shoddy work on his shirt where the steering wheel blocked him), and put him in between us. However, it looks like his coloring is off from what we are - and I can't quite seem to get it right. Color balance is definitely not my strong suit in PS.
David Boxing_WIP.png (202.28K)
Number of downloads: 19
Could I have a description of how to match the skin color of the head to the boxer's skin color?
I want to use a color balance layer with a vector mask to change the color of a shirt to come as close as possible to matching a particular color swatch. So, say the color swatch is RGB, 101, 164, 33
The color balance has the 3 sliders and I can adjust:
cyan -> red
magenta -> green
yellow -> blue
Is there a way of converting the RGB values (or CMYK values) from the swatch that is not trial and error that will tell me where to set the 3 color balance sliders to match the swatch color?
I made a ring and I want to change the color using color balance. It's with particular, multiple copies with fast blurs applied to them to give the glow and it's all pre-composed with the particle layer. Now all I want is to change the color as a whole but color balance doesn't seem to work when applied to the pre-composed layer. I even tried color balancing the particle layer itself, made an adjustment layer and applied color balance on that.
View 1 Replies View RelatedHave a photo of inside of bus, seat covers etc. Color comes out bold, very little black, I can't find a balance, where I have a fairly normal, but lighter black halftone, with an overlay of color.. (Old copy of PS 6) I know, ancient, but it works.
View 1 Replies View Relatedi use a few tutorials and they say about colour balance, can i get that in elements?
if not is it possible to port it from another version of photoshop or is there a plug-in for it?
I was wondering if anyone was familiar with algorithm used to Color Balance.
I'm interested in automating a process which includes Desaturating and then Color Balancing.
I solved the Desaturation (take the highest number of R G B, divide by 2, apply to R G B values of pixle.)
I am curious to know how a pixle would be modified by say, +100 Blue in Lows/Mids/Highs
Suddenly when applying a color balance adjustment layer I'm unable to click on the shadows, midtones, and highlights. They are each grayed out and I'm only given the option to apply the setting overall. I'm thinking I must have made some kind of setting change somewhere for this to happen.
The images are RGB 8bit color mode.
I have a question about color balance. It seems it's the only one that the drag and drop doesn't work. It's my pc , or is the default?
I added 2 screenshots. i added a red arrow to let you see the mouse pointer in the first screenshot i can drag and drop (i'm not talking about the sliders) in the second screenshot , ONLY color balance (and it's very WEIRD ) i can not drag and drop.
I'm under w7 , tested under 64 and 32bit .don't know about mac.
I work in crop research and have written a code to analyze an RGB image and determine if a pixel is senescence, crop, residue/soil, or shadow. However, this only works if the color is balanced in an image.
I do not know what the technical definition of balanced color is, but to me it relates to the RGB curves one can see in the curves mask. Over the last 5 years a colleague of mine has taken thousands of photos that I need to analyze with my system, unfortunately some have blue hues, some are overexposed, and some are just flat.
Is there any way to apply ratios or mathematical equations to the curves panel so that all images have a similar balance that will work with the code I wrote?
(below I included a few images to give you a feel for the variance)
When I try creating a color balance adjustment layer is it opening a levels adjustment layer. I'm using the New Adjustment Layer button at the bottom of the Layers panel. Is this a bug with CS6? How can I fix the problem?
View 10 Replies View RelatedI'm using 2 different images of 2 different people, and layer masking features from one person on to another. I tried using a Color Balance Adjustment Layer..
1. Should I be adjusting the midtones, shadows or highlights?
2. I added a little bit of red, is there ever a time when you might add add magenta or green to blend skin tone? What about yellow or blue?
3. Any other general tips for doing this?
I learned from Scott Kelby's book on a technique to remove color cast.
What is the difference between color cast and correcting white balance?
As you can see by the spelling of "Colour", I'm outside the USA!
A bit of background: I graduated in photography a couple of years back and I've used PS6 and now PS7 quite extensively. I use an Epson 3200 scanner to scan my medium format (6x7) and large format (5x4) negs and trannies (that's FILM trannies...not the other kind!). If they are for exhibition, I'd burn them to CDROM and get a digital lab to print them for me otherwise they'd get printed on my Epson 760 (yes, it's quite old now!).
I've always had issues getting the screen calibrated. How would you guys go about correcting the relationship between the scanner/screen/printer? The screen is a Viewsonic E70 and I use the E70 profile.
how do you change the skin color of people?
Maybe a white guy into an asian guy or vise versa.
I cannot get a color balance adjustment layer to come up. Every time I do photoshop creates a levels layer. Selecting levels makes a levels layer. All of the other adjustment layers seem to be working normally.
How do I fix this? I have a deadline and no time to be reinstalling photoshop.
could anyone tell me how to match the skin color of somthing with mine like pulling somthing off somone else like a tatoo or a scar and making it look like its ment to be there like the same skin color?
View 1 Replies View RelatedWhat way would work the best for changing skin from white to black in a photo.
I need to do it for a school project.
(I have Photoshop CS3)
I FOUND SIG AND JUST PUT THE PIC IN THERE FFOR BEFORE YOU SEE THE SKIN WELL WHAT EFFECT IS THAT!
View 3 Replies View RelatedI've been playing around with this photo I have, I extracted a person's head and placed it in another image on someone else's body.
What's the best way to adjust the skin color on the face to match the skin tones on the other image's body to make it look natural?
I've tried using Photoshop CS's "Match Color" feature but it still doesn't look that natural.
Editing a video in LR4 you can capture a frame, adjust the color, and save a preset to apply to other videos. BUT the frame capture is a jpg so you can't specify a color temperature; you hve to use the slider(s) and cross your fingers. I have two consecutive videos, one shot with AWB and the other set to Shade. I need to adjust the AWB shot (very cool) to match the Shade shot (very warm). There are so many sliders, I can't even get close to matching them.
View 1 Replies View RelatedI'm working with 2 pictures of people. My goal is to replace the face-parts (lips, eyes etc.) with each other.
So person 1 will get the mouth of person 2, and backwards. pretty simple, as all I have to do is match the skin color, and from now - piece of cake. (I actually said piece of cake :P )
So, what I normally use are only 2 tools: Hue/Saturation, and Color Balance.
Problem is - it's still pretty difficult to get perfect results. and beyond that, sometimes I just can't manage to get to even a normal solution. so it's very frustrating.
My question is: What are all the tools that are used to match colors?
(Until now, what I basically did is: take the slider, move left - check if better. if not: move right - check if better, if not: return to center. like this with each slider of the 2 tools I mentioned above. doesn't sound very professional, huh?)
P.S. A reference to even a bunch of tutorials and guides about coloring, would mean THE WORLD to me, as around 60% of my Photoshop are coloring and stuff like that.
Id like to be able to take the color and skin texture a body and place it another body!
View 5 Replies View RelatedI am trying to use Color Balance and the window doesn't work. The only part that shows is the "Enhance Color Balance" box, the words "purple" and "green" just above, and the preview arrow (which does nothing) and "preview on image". Preview on image is checked and it does show changes but I am unable to uncheck it. Nothing else shows. Nothing I have tried has worked, including restarting the computer.
View 6 Replies View RelatedI'm running Revit Architecture 2012. I did a render and it looks fine in the default {3D} View. I selected to save it to the project and when I go to the renderings view to recall it, the color balance is all shifted off way way to the blue end. I tried going back over to render dialog and adjusting the white point all the way up, and it had the expected effect in the {3D} View (shifting everything to overblown orange), but nothing changed at all in the renderings View when I tried to resave it after making the adjustment.
View 3 Replies View RelatedWhat is wrong with my GIMP? This behavior persists in every 2.6 and 2.8 build I've tried, in fact I'm pretty sure I first discovered it somewhere in 2.4 .
It's GTK bug #644032 - certain adjustments made to the Hue-Saturation tool (with overlap) may have problems handling the red/magenta wraparound properly. Which was supposed to be fixed eons ago (and with exception of this one specific usecase, it already WAS - see GTK #527085).
It originally happened while trying to adjust the color balance on a scanned image containing ambiguously red/magenta hues (yes I know we have an actual tool for Color Balance, but I've never been able to quite wrap my head around what adjustments yield which results). I have attached a sample file demonstrating expected vs. actual results with this usecase. My GIMP is clearly screwing the pooch on these adjustments ... but HOW, because even when I browse the online git repo the relevant source code looks like it should work perfectly (I've even mentally stepped through it and verified correct results, unlike my actual GIMP).
Try performing the same adjustments on your GIMP (note which build and version) - do you get the same results I do?
Can you change the skin colour of CS5 to any colour you wish or are you stuck with mid grey?
View 2 Replies View RelatedWhen I use Adjust --> Color Balance and use the temperature slider the cool <---> warm seems to work as expected (i.e. my image becomes more blue to the left, more red to the right).
When I click the Advanced Options box, the slider labels are the same, but the behavior swaps: so the Cool label is still on the left, BUT when side the handle to the left, my image becomes more RED, & if I slide to the right (labeled warm) my image becomes more blue.
I've got two different color balance problems. The first is where I have two photos that I want to match the lighting in each.
The second is where I have a 'control' and I want another photo or print to 'match' it.
Currently I'm having the second problem. A customer brought in an original painting for us to scan and make holiday cards from. But they also brought in a photo print from a local chain and they have asked me to match the color representation from that print.
It is duller, the blues are purple and it is over all darker. Personally, I think the photo is a horrible representation of the painting. BUT IT IS WHAT THE CUSTOMER WANTS.
I've scanned in both the photo and the original drawing. If I print the photo it matches the color of the scan. (but is the wrong crop size and can't be used for the card.) How do I draw color out of that and get my original to 'match' other than just using my eyes? (which is about impossible for me today) I normally use 'sample/target balance' in corel PhotoPaint, but you can't do that between two layers OR between two files. This would be a great change to make in x7 or an update.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
How do I change skin color using a layer mashow do I apply the mask if I want just change say an arm or just the face area
View 1 Replies View Related