What I am referring do is the image of the astronaut comprised of tiny little dots, with the color of the background clearly showing through. I really like this effect and I was wondering how I could recreate this effect. I am looking for photoshop tutorials but I have a feeling I am searching for the wrong thing.
View 1 Repliesi recently upgraded my iMac from 9.1 to 9.2, and all seemed to work well. however, there is a problem with Photoshop. i routinely use halftones in my work, and am having a big problem selecting a halftone pattern. no matter which pattern i select (elipse, round, line, etc.) all i get are squares.
i've tried deleting my preferences and also upgraded from 6.0 to 6.0.1, but the problem remains.
I have been struggling to master the style used here by artist Joshua Budich, I have been searching the internet and spending many hours on photoshop the past few days trying to figure out how to add halftone/polka dots in the same colours, like the one used in the Star Wars print and the pattern used on Tyrell.
View 7 Replies View RelatedWhen I select a layer that has an image (I am going along with a tutorial on the Kelby Training site) and I am using all the same settings as they are in the video, when i get to the Filter Gallery > Sketch > Halftone pattern the view goes all white. Nothing.
View 2 Replies View RelatedI'm using a two channel multi-channel file, and am trying to achieve an effect using the Halftone Pattern filter.
I apply the filter to one channel only (which has an image which I've increased the contrast, to deliberately blow-out the white areas). The other channel is just a flat block of background colour. The problem is that this filter applies itself in a horizontal manner only - and I want an angled pattern.
So I have rotated the image channel 45 degrees and then applied the filter ass before. Which works great and give me the effect I want.
The problem is because I have rotated the image 45 degrees, the corners of the image now exceed the canvas, and when I rotate the image back to it's original angle, I've lost the corners of the image.
So why don't I just increase the canvas size before rotating the image?
Well I did, but the strangest thing occurs when I apply the filter (same setting and selection as before). The filter acts quite differently, most notably in the (deliberately)blown out areas of "white". Before increasing the canvas size, the line pattern would taper into nothing in these areas. However, after increasing the canvas size, these areas become thick lines, instead of tapering to approxiamate the tonal value (white) before having applied the filter.
I want to take the idea of the halftone pattern in the filter gallery and modify it. Rather than using a dot pattern, I would like the dot to be replaced by another pattern. For instance, replace the dots with stars. Now the image is composed of hundreds of stars.
View 5 Replies View RelatedDoes anyone know of a way to create your own custom halftone pattern in Photoshop? e.g. When converting to a bitmap you get the option of dot/line etc but you can't choose any custom shapes (I want to use an asterisk). You can use a pattern but it doesn't produce the same effect. Does anyone know of a way to do this or have any links to tutorials?
View 1 Replies View RelatedHow do I create a halftone pattern where the dots are the shape of a honeycomb cell or polygon rather than a circle?
View 3 Replies View RelatedThe image to the left, the mans face ;
Ive been trying for days to create this type of halftone effect to photos in photoshop,
how to create those Colour halftone effect?
I had seen alot of advertising poster using those effects but i simply cant get to the way they did.
I tried the colour halftone in my PS 7 but its not what i want.
For example, I have an image of a face, Is there any way I can have this face to b seen as dots?
The Dots usually are spaced at different distances and in different sizes.
I have a problem that's been driving me nuts for the past couple of weeks. I have a collectible playing card that I' like to reprint . The card was printed using an offset press and so there is a distinct halftone pattern on the card. What I'd like to do is to scan the card, remove the pattern in photoshop (Noise->Median), use CorelDraw to print a ps which would reproduce the exact same pattern, and print it using Ghost Script with my Laser Jet 200 (600 dpi).
Here's a link to the card:[URL]......
So I have 3 questions.
Is it possible to reproduce the halftone pattern ?
If yes, can I do it with my printer ?
If no, what printer could do it ?
I'm trying to simulate a retro cartoon look with large halftone dots something like this: [URL] ...
Where I can download an Illustrator pattern like that?
I'm looking for a way to print at around 200 lpi with a laser printer, but I don't know which one. I've bought a Laserjet Pro 200 n251mw but it doesn't seem to be able to print in halftone even with the PS emulation.
I'd like to be able to reproduce the distinctive rosette pattern on one of my collectible playing card. I've looked everywhere on google, but most of the doc about halftone is referring to low lpi work like T-Shirts.
The fact is that I can produce the desired halftone pattern I want in Illustrator, I just can't seem to find a way to print it. I've read about Xerox printers on this forum that are maybe able to do it, but I don't know. Is a 600 dpi laser printer enough or do I need more ?
Here's a sample of the halftone I want to reproduce, the canvas is approximately ¾ of an inch.
How to do center Halftone Effect in CorelDraw in Photoshop Corel not getteing proper result.
View 5 Replies View RelatedThe final design I send over has to vectorized.I am going after vintage look.how to lay vector beat up/distressed textures over design, merge them and delete them etc. BUT I am not after that type of vintage/distressed look. I am more after having certian parts of the design being faded here and there. I have attached an example pic.I can't use opacities and it has to be one color.
I attached a halftone tutorial that does EXACTLY what I want, and it works perfectly BUT they are doing it in Photoshop, is there a way to do this or something like this in illustrator? URL...
I have created a sticker on Illustrator and want to give it a fine retro halftone effect. Tried allsorts and I am having trouble getting it to look good. This is the look I want just a very fine halftone effect.
View 4 Replies View RelatedI am trying to make a shape made from the blob tool made into hafltones. I do not want it as a gradient, just equal sized halftones throughout the shape. Is this possible?
When I do it using Effects/pixilate/color haltone it makes multiple colored halftones, whereas I just want one color. And when I change the channel's it comes up with similar results.
Remember Chartpak or Zip-A-Tone shading film? I REALLY miss it. Not too sure Photoshop 6.0 fills the bill for what I want to achieve but that's the look I want to add to my existing images. I want to do it similar to "bucket-filling" an existing open area. That's about all I want to do. But there are so many steps needed in order to achieve such a basic look. My question regards how to actually achieve or what steps I need to take in order to add that dotted pattern to my existing images (line art)...
All of the previous tutorials are so complicated, involving so many steps. Are there any actual steps or lessons I can see to try this? Look at the strip For Better Or For Worse...that strip has the best dotted effects...how to achieve that look in PS6?
Well to put it simply I need to paint something related to my cold war class on my teacher's wall (already covered in many cold war events) and he suggested that I make the image into a silk screen to make it easier to paint. I have absolutely no talent in painting so I decided to give it a try. I then proceeded to try to figure out how to do it, as well as find an image that would work well with it. I am not asking for someone to do it for me, but I was hoping someone could tell me how I would go about making this image into something more like a silk screen (or anything easier to paint) .....
View 5 Replies View RelatedI'm doing a anaglyph (3D technique, working with red/cyan, red/blue channels, requires colored (red/blue , red/cyan etc. ) glasses for the effect to be seen) poster in silkscreen for my art project. the question is, how do I prepare the anaglyph text for printing in Photoshop? it is easy on computer: I manipulate with the red/blue channels, shift them left and right and they nicely overlay in the middle, creating the black color. but for the screen print that kind of overlay isn't possible (is it?), for the ink isn't transparent, so what would be the best way to get this black layer? It will obviously be 3 colored silkscreen print.
View 5 Replies View RelatedIce Pattern plug-in filter in effect. Does anybody know an alternative tool?
View 1 Replies View Relatedhow to achieve the texture effect like in the picture have attached?
View 1 Replies View RelatedOn one image I used ripple texture to simulate shine on glass and it worked great. On another image, I tried to do the same thing but the texture is a small repeat pattern and doesn't look like glass at all. I tried to get the effect by changing size and hardness and pattern size of the brush but no luck. What should I do?
View 4 Replies View RelatedWhen adding a grain pattern effect to an object in Illustrator CS6 I get an odd bevel that surrounds the object. There is nothing in the Appearance window to suggest that there should be a bevel and I didn't add it myself.
Is there some setting I am missing or an easy way to remove the effect? For now I am masking the object with a slightly smaller object but it's starting to drastically increase the size of my file.
how to do turn my image into the "dots" like that one of that face, I kind of (not really) know how to use the color halftone filter but i can't do this.
View 1 Replies View RelatedI am a screen printer and us photoshop regularly and that feature is a ver important part of my serparations when I make my film. I am also sue that thousands of screen printer also use this feature. Why can not such a simple already installed feature not be kept? Maybe off set printer do not need this but screen printers need this feature, we must be able to adjust our DPI , dot style and angle.
View 12 Replies View RelatedI have read several topics and threads regarding halftone, I can create an image using this effect but I would like to know how to make one that is in colour with black dots.
Please see the image attached as an example.
I have created one but the dots are in colour, again see attached.
The only way I can think I creating the image in colour and with black dots is using two separate images and then merging them.
here are my instructions for a photo... i acted like i knew what my boss was talking about bc i didnt want to look like an idiot. but honestly i forgot what this stuff means.
-convert to halftone
-screen halftone to 20%
-120 lines
I have to prepare it for film too, in case that changes anything.
I'm using Photoshop CS5 on Mac OS X. Last year I created an artwork including colour half tones, but also some other simple halftone filter that I applied to layers of solid colour (see attached image - you may need to view it at 100% to see what I mean)
It's a simple half tone pattern of white vs 1xcolour using either circles or squares. I remember that this was applied simply, not any special process as I didn't go out of my way to create this effect I just stumbled upon it. I can't for the life of me remember how to do it again.
How can I create a custom halftone screen? I have tried to define a pattern and use that, and have over layed a pattern with hard-mix but I cannot seem to get as clear results as these.
View 9 Replies View Relatedi am trying to turn a black and white image or line art (with or without grey tones) into an image with white and one color.
an example would be if i have a white page with black lines on it. how could i go about making the black lines pink (and let's say they are on the same layer) without taking the paintbucket to each area?