Photoshop :: Selection Duplication
Jul 28, 20051. Can we duplicate a selection (not the contents) ?
View 6 Replies
ADVERTISEMENT
Photoshop :: Editing Duplication On Picture
Nov 10, 2013I am trying to duplicate the editing on this picture, but I have very little experience with Photoshop. Look at the unedited (top) compared to the edited (bottom) what might have been done to achieve the edited effects?
View 1 Replies View RelatedPhotoshop :: Duplication Of Vector Shapes
Jan 12, 2006I am tryign to duplicate a vector shaped star many times at the moment all i can do is duplicate the layer it is on.
this is fine but iam gogin to end up with about 100 layers. is there anway of copying/cloning a vector shape i can rasterise it if needed but this hasent helped.
in case its important i have two suplicated layers of test i want to remove star shapes from the top layer so the bottom layer comes through so you have text with stars in.
Xara :: Set Duplication Distance To 0 X 0 For All Documents
Jun 23, 2011In older versions of xara you could set the duplication distance to 0 X 0 for all documents. In the new Pro 7 it appears that the duplication can only be set for each document. Am I missing something? I always want the duplicated object to appear on top of the original. Can I do that somehow (without having to set that per document?) Also, the help files say that Control D will duplicate like it used to in xara xtreme, but I can't get that keyboard command to produce results. Is this a glitch or is it intended that way? Control, Alt, D does duplicate but that's clumsy.
View 8 Replies View RelatedAutoDesk Smoke :: Duplication When Dragging CFX Onto Other One
Jul 6, 2012Steps:
1) create a CFX
2) drag the CFX in the time line from one clip to another without CFX
Observed Result:
You seem to get the CFX tree, but possibly inserted twice into the new CFX on the target clip.
Desired Result:
CFX tree should only be copied once into the new clip.
Illustrator :: How To Repeat Duplication With Changing Values
Jan 24, 2013I made an illustration to show what I need, I guess it's easier to understand than my explanation below...
QUESTION: I have a circle. I want to make a copy of this circle for, say, 80 % of the original size. I'd like to repeat the duplication so the next copy have the same distance to the second circle as between the first two circles (in other word the percentage would change between tranformations) - and so on.
Hopefully there is some easy way to achieve this so I don't have to do it manually.
(Btw, I use CS5)
Lightroom :: Unwanted Duplication Of Picture Titles?
Jun 25, 2013I had a batch of 42 photos and laboriously entered titles for each one. At about the 40th, I discovered the program had copied into all the picture titles the most recent title entered. So it had overwritten my work. I started over and entered titles again. This was not a synch action on my part and there were no efforts to have a repetitious action that might apply to the pictures included in my collection.
I will understand this is probably some kind of "feature" but if so where do I turn it off? This is Lightroom 4 and involves both raw and jpg files.
Lightroom :: How To Stop Duplication Of Imported Files
Feb 1, 2013I must have accidentally ticked something because all of a sudden Lightroom 4.3 has started to import an original filename.tif file and also copy it to filename -2.tif, doubling up each file. What do I have do to change to stop this?
Using a 64bit Windows 7 PC
CorelDRAW X6 :: Fill Shape With Automatic Resized Object Duplication
Jun 3, 2013I would like to know whether Corel Draw can fill a shape with another shape or object/icon so that it gets scaled to the shape size. As in this picture: [URL] ...
As you see the shape is a text/font and it's filled with diamonds (it's not simply following a path). If it's not handmade I assume the automatism works like that: there is only 1 diamond = the object, and the object gets duplicated through the entire shape and resized so it fits.
It appears Adobe Illustrator cannot do this automatically, see: [URL] ... (there's another example in the first post), can Corel Draw? I don't have Corel Draw. I am just looking for a program capable of doing it automatically.
CorelDRAW Graphics Suite 12 :: Turn Off NUMPAD - Key Auto Duplication?
Sep 3, 2011if you have something selected and you press the minus key on the numberpad, you get a copy and paste of your selection. Unfrotunatly, I do not see a place to change this ANYWHERE under customization. how this can be turned off?
View 6 Replies View RelatedInDesign :: Shift-Constrain / Option-Drag Duplication And Space Bar Hand Not Working?
Apr 13, 2014I was having a few issues with shift-constrain resizing not working, and option-drag duplication not working, also using the space bar to move the document around the viewport.
OSX 10.9, InDesign 9.2.1.
I reset the preferences, restarted which failed to solve the problem.However once I updated my Wacom driver from 6.3.3 to the latest 6.3.8-2 that seemed to solve the problem.
Photoshop :: Why Vector Selection Tool (white Arrow) Change Layer Selection To Another
Sep 1, 2013I have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
Photoshop :: Selection / Patch - Select Blue With Quick Selection Tool?
Dec 10, 2012If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
Photoshop :: Selection On Sliders And Curves Altered When Click Off Them After Initial Selection
Sep 13, 2012I have Photoshop CS5 on a Mac OS 10.7.4 My problem is that when I am using curves or a slider, my selection does not stay in the same place. For example, I chose the number 8 on a slider, after I release my selection it will either go one number after or before my selected number. I have had this problem since I got my computer, December 2011, but it has only recently started to frustrated me because of having to use Photoshop a little more than I usually do.
View 2 Replies View RelatedPhotoshop :: Complex Selection - Best Selection Method To Drop Out A Background
Oct 24, 2011how to "drop out" the background from this photo (I have loads to do which are very similar). Thus far I have tried channel selections and the calculations tool + all the normal quick selection tools and I just cant get it to work without spending hours adjusting things. The end effect I need to achieve is a perfect white background without loosing any of the detail if possible. On a side note I have also tried taking the photo on blue, green, black and white backgrounds but due to the number of colours present in the products its just not working for me.
View 5 Replies View RelatedPhotoshop :: Make A Selection Out Of A Text And Expand The Selection?
Sep 1, 2006Using photoshop, how do you make a selection out of a text and expand the selection?
View 4 Replies View RelatedPhotoshop :: Quickmask Selection Is Turning Selection Opaque
Jul 6, 2009I am trying to cut a person out of a picture with a deatiled background so I am using the quickmask selection and paint brush. I'm done selecting the person and have gone back into normal editing mode. I then inversed the selection created within quickmask to select everything but the person in the background. When I click delete, the background vanishes and the person become opaque.
View 3 Replies View RelatedPhotoshop :: Feathering A Selection Outwards After Making A Selection
Dec 26, 2003If I have mad a selection with say an ellipse marque, of say 100px and now I want to fether that same selection outwards, ie to start the feather 10 px outward of the 100px selection so that the 100th px has a 100% transparency and the 110th px has a transparency of zero,thus making the new selection 110px, how could I go about doing it. With the current feathering of the selection, it feathers only in the marquee already selected, not outward, and you cannot place negative feathering px. I know that there is most likely some sort of a ration where you would expand the selection by a certain amount of px, and then apply a ratio of feathering to it to enalble it to feather outside of the 100px marquee.
View 3 Replies View RelatedPhotoshop :: Pasted Selection In CS6 Using Marquee Selection?
Aug 18, 2012When I pasted a selection made with the Marquee tool there is a transform grid around the pasted selection. I use a MAC and Photoshop CS6 and would like to deactive a feature for this automatic grid, if there is one.
View 3 Replies View RelatedAutoCAD 2010 :: Multiple Grip Selection Not Working When Pan Or Zoom During Selection
Jul 12, 2011When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
AutoCAD Inventor :: Prevent Display Of Selection Lines Upon Selection?
Mar 28, 2013I have a flexible sub-assembly in my top assembly. Sometiems I'm trying to demonstrate to others how a mechanism in the sub-assembly works using this flexibility feature. It works great, but when I move just one little part of a flexible assembly, Inventor displays the wire-mesh of the entire flexible assembly, because technically the entire assembly is selected, even though I'm only moving one part. It clutters up the screen very badly, detracting from what I'm trying to show.
Is there a way to prevent Inventor from displaying the selection lines? Either only when I'm moving a part in a flexible assembly (which would be great), or to just turn them off completely when I'm presenting like this? I know I can turn off pre-select, but that doesn't work, because once I start moving a part in the flexible assembly, the assembly is "selected" and the wire-mesh displays.
AutoCAD .NET :: Leave Elements In Selection Mode After A Selection Action?
Sep 11, 2013When creating a selection Command using the PromptXXXOptions and PromptXXXResult. The entities are selected on the current view, but once the selection ends the entities return to an unselected state.
Is it possible to leave them in selection mode.
I want to this, because it will be better to use Editor.SelectImplied() instead of saving the last selection object Ids.
AutoCAD Visual LISP / AutoLISP :: Remove A Selection Set From A Selection Set
Nov 15, 2013I've created a lisp that draws the boltholes of a pipe flanges, using the correct number of holes, at the correct diameter at the correct bolt-hole diameter and then rotates. Everything works seamlessly, when i do just one flange. But I've discovered that fewuently there will be mulitple times when a user will have to perform the command.
So the idea I had was to do the following:
Select all circles with (setq CirclesFirst (ssget "X" (list (cons 0 "CIRCLE"))))
Go through the code to create the new circles.
Select all circles with (setq Circles (ssget "X" (list (cons 0 "CIRCLE"))))
Remove selection set "CirclesFirst" from "Circles".
But what for some reason (command "_.select" Circles "R" CirclesFirst "") does not work.
GIMP :: Selection Handles On Non-freshly Created Selection
Mar 1, 2013Right after one makes a selection, say by using the Rectangle SelectTool, is presented with handles that allow altering the selection.
If one then selects another tool without deselecting is being deprivedof these handles while the selection remains active thus rendering himunable to alter the selection in that fashion.
Thus forming my question: is there a way to make these handles to(re-)appear on a non-freshly created selection?
Revit :: How To Use Shift To Add To A Selection And Control To Subtract From A Selection
Apr 18, 2012I am using Revit Arch 2011 and it is more natural for me to use shift to add to a selection and control to subtract from a selection. Can this be changed and how?
View 1 Replies View RelatedPhotoshop :: Can't Make Path Selection Work On Inner Areas Of Path Selection
Aug 20, 2012The problem is that it's only loading the outline of my path as the selection. All the inner areas aren't included, and I want to chop them out as well
View 26 Replies View RelatedPhotoshop :: Square Selection Tool, The Selection Edges Are Rounded Rather Than Square
Jan 18, 2009When I use the square selection tool, the selection edges are rounded rather than square. I can't remember how to rset this.
How do you make the edges square by default?
Xara :: Width Of Selection Box In Selection Toolbar
Feb 27, 2013The Width of Selection box in the Selection Tool Inof Bar does not seem to add in the width of any line thickness. If I make a rectangle that is 500 x 250, the box correctly reflects the size. If I change line width to 16, the box still shows 500 x 250. It is a problem upon export when the exported file does include the line widths, in this case it adds a total of 16 pix (8 each side) with a resultant export not equal to the displayed width. WordPress seems dogmatic about certain widths an exact width is useful.
I suppose I can add the labor of calculating line widths to meet exact export dimensions but I do not remember doing this in previous editions. I'm thinking there is a buried setting that I have changed. Is there such a setting to account for the discrepancy?
GIMP :: How To Blend Selection Edges Of A Selection
Jan 13, 2013I know how to blend selection edges of a selection in Gimp 2.8.2, but if I have only one side of a selection that needs blending, what should I do?
Lets say that I have a grey box on a black background and only want to blend the left vertical edge into the background.
GIMP :: First Selection Disappear While Making Second Selection
Nov 21, 2013Every time I make the second selection in a picture with the lazo the first selection disappear. what can I do to fix it?
View 8 Replies View RelatedIllustrator :: Selection Tool Suddenly Acting Like Direct Selection Tool During Click-and-drag
Aug 22, 2012This morning, my Selection Tool (the filled-in arrow) is acting like a Direct Selection Tool (the hollow arrow), but only when I click and drag on a group. It ends up select the anchors within the group rather than the whole group itself.
I've checked my preferences, quit and relaunched Illustrator a few times, and nothing seems to fix it. The problem briefly went away a few minutes ago, but came back when I quit and relaunched for good measure.
It's happening in Illustrator CS 5.1. I have CS6, and that version works fine, but I'm waiting on some plugins to be updated for it, so I'd like to use CS 5.1. I'm also running the latest Suitcase Fusion 4.