A client wants to place an Illustrator file within Photoshop and save as PDF. Readers will view the PDF on screen at increased magnifications. I know that people will say, work the whole lot in Illustrator - but they don't want to do that at this stage.
Text will stay vector no matter what magnification - but the map looks pixellated.
By keeping info as smart object doesn't work.
I've created a Photoshop document with some stylized text (gradient overlays), and I need for this to be transparent. If I save it as a PSD file it retains the transparency when I add it to InDesign. However, I'd like to keep the text as vector if possible (I have not rasterized it). I know I'd have to use a Photoshop PDF for that, but I can't figure out how to make a PDF transparent. Should I be trying to go through Illustrator somehow? Or stick with the rasterized type?
View 6 Replies View RelatedSaving an image in Photoshop CS6 as .eps is actually True Vector quality?
Will the images I save as .eps be totally scaleable without losing any quality?
If not, is there anything I can do to the (tons) of images I have already made to make them not lose quality?
I tried opening a .eps file/image in Inkscape which as I understand is a vector program but the open file doesn't recognize the .eps files.
The .eps seems file w/in Ps itself but now I'm wondering about other programs. I'm so new I don't even know if that makes an sense.
Also, if Ps .eps files tend to lose scalable quality then is there a way in which I can create images as true vector or as images that won't lose their quality? Do I need an other program?
I've recently been working with a new client who needs all image formats to be vector. I'm having a problem after sending the final images though. On my screen they are smooth and don't have any problems when it comes to clarity, but when I email them to the client they tell me that the letters have jagged edges and aren't proportionate.
Is there a certain way I need to save these images when it comes to emailing them? When I save them I go to save as, then I save it as an .eps, and then when the saving options box pops up I keep it on Illustrator 11 and then save it. Should I be picking an older version of the illustrator when I save it, or should I be using the "save for web" button?
PSPro X. After adding text to a jpeg image it becomes a vector object, what is the easiest way to save it as a jpeg file
View 7 Replies View RelatedIs there a way to either save/export a vector file that can not be edited.
I know there are tracing programs available, but I want to make it as hard as can be so this logo will not get re-edited.
I designed it for a customer (belongs to us) they did not contract/pay us for it. We do all of their clothing. She is sponsoring an event and the event coordinator wants the logo to put it on their advertising. Just don't want it to end up on other clothes.
I have lightroom 3. I have set my camera on shooting in jpg and raw. I import them both and get them as 1 picture in lightroom. When I rate the picture with a star and I save it to the exif data it only saves it to thseperate xmp file. Also if I rotate the picture it only writes it in the separate file. I want to save also the exif data to the jpg file. How can I do this in one go?
View 17 Replies View RelatedIn the past I've been successful adding and storing metadata to the 'Description' column in the project window in the past with the 'Link' symbol activated in the Metadata panel under 'ile'>Dublin Core>>Description. This would allow me to retain the description metadata when the media is imported into a different project.
However I am using this same procedure this week, but the data does not seem to be saving/adding to the XMP 'File' metadata. See screen shot below. I've experienced this problem within different proejcts and with the three main media types in our production house: XDCAM EX, P2 MXF and Ikegami MXF.
Why this would work previously, but not now? Is it related to the latest version updates?
This is a PC, Windows 7 system.
I used the industry model template for the North American electric grid, thinking it would link the data I saw on the tutorials. I am pretty sure that I need to find industry models for the electric grid now that I can't seem to get the conductors to show up on my map. Is that right? where I can find an industry model of the electric grid around Lake Michigan?
If I cannot find an industry model (a database?), can I just switch workspace to "Planning and Analysis" and import the models I have (images, West side of lake only) and attempt to manipulate those (while keeping everything I have)?
I have lost much work repeatedly upon saving. Do I always have to "check in" my data before saving?
Is there an easier way to match-up roster images (that aren't GEOTiffs) to shape files (that have a coordinate system) rather than using "scale," "rotate" and "move"? I didn't have luck with the "pick" option and monkeying around with manual manipulation didn't match up well. Perhaps there is a way to manipulate points on an image?
I am making myself a logo in photoshop. I have made all the letters that will be used, but they are all seperate entities as most of you who have used vectors know. I would like to interconnect the letters, as well as an angel I have made to go above the letters. My question is, how can I join two seperate vector images into one vector image. For example, joining a letter E with a letter D. I wonder if theres a way to do this without having to delete part of each image and then re-draw, which is a pain. Sorry if this isn't really clear, but its hard to explain.
View 4 Replies View RelatedIs this possible? I'm in Windows, Photoshop 7.0. I also have a pretty early version of Illustrator, not sure which one.
View 3 Replies View RelatedWhen I save my photoshop file as an .eps, I can have all the text from the Photoshop file remain vector, but a Vector Smart Object does not remain vector. Is there a way to have it remain vector?
View 15 Replies View RelatedI am having trouble doing this in my current software, Serif Drawplus, PSE, Photoplus, (I have Gimp but haven't used it ever yet). And I am considering buying X6 for use in other projects. So, can x6 do this in either Photo Paint with a bitmap, or in X6 with a group of Vectors?
I want to wrap a bottle with a logo. The mesh warps aren't working for me in the above applications, and envelope warping will not work either. Transform-Warp is not present in PSE. I mention that because I see a tutorial for PS using that. How would Corel X6 Suite do this? I am considering buying the software once some questions I have about it are cleared up. I wish Corel would make the manual and tutorial videos public. I'd rather download the trial for actually using it rather than trying to see if some feature is present, or a workaround for a feature a competitor has.
I am also hoping to make in this project, some 10-20 different bottles with the logo on, of different sized bottles and different rotations of the bottles. Plan D is acquainting myself with Blender, but lets hope I don't have to go that far!
I am "vector tracing" a logo in PSP, and exporting it to Motionstudio 3D for an explosion effect. I am currently able to do this with no issue, but the explosion effect (specifically the size and shape of the particles) is based on connecting the nodes in a vector object. For example, if I have a capital L made up of 10 nodes, the subsequent explosion effect with separate the L into particles based on the 10 nodes. What I want to do is have the various nodes that comprise the traced letter connect with constituent nodes in the center/surface-area of the letter to form a "grid" (in PSP) so that the subsequent explosion (after export to Motionstudio) is comprised of more/smaller particles. Is there a way of not only having a vector object with "fill", but also having that "fill" made up of other vector data?
View 5 Replies View RelatedI have pasted a vector graphic from AI CS3 to PSP CS3 as SmartObject. Is it possible to use this vector graphic (without rasterizing) as the vector layer mask? If so, how to do this?
View 2 Replies View RelatedI've been using Illustrator since the late 80's but this request just now came up for the first time, twice in one day: the clients each want me to send them layered files (OK-no problem) wherein all the layers, even the raster layers, register as vector layers. Or at least all the layers, regardless of file-type (vector or raster) are contained within an unflattened Illustrator file. One of the clients specifically asked that the Type layer (No problem-all the type is on one layer) be "vector mapped", whatever that means, while all the other layers can be Photoshop layers, if necessary. So how do I hand them an open, unflattened Illustrator file containing both vector art and raster art? Can it be done in Acrobat, as a PDF? I'm working in AI and PS CS5, but I can and will upgrade if I have to.
View 4 Replies View RelatedI'll omit the long background --- suffice it to say I did this once and need to do it again, but can't recall the toolchain / workflow I used.
I _think_ it was Macromedia FreeHand 8, and that I used a plug-in w/in that program, but I can't recall. Any way other than rendering the drawing as a half-toned bitmap and then tracing it? Or re-drawing the image on top of such a bitmap?
I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
View 1 Replies View RelatedI have started editing photos using the Photo Fix Options in Instant Fix. I have then switched to Photo Editor to fine tune my edited picture. When I use save or save as, to save the edited picture both the edited and original appear in the files. If I start in in Photo Editor and save there is an option to uncheck that reads "Save in version set with Original" However I am more comfortable with beginning in Instant Fix and then switching to photo editor. For some reason when I go to save after switching from Instant fix to Photo editor the uncheck feature is no longer available. step by step instructions to save revised photo afterusing Instant Fix first then Photo Editor.
View 3 Replies View RelatedIf I create a file in Photoshop without coming from Lightroom or duplicate a file in Photoshop that I opened from Lightroom, is there a way to save the new file from Photoshop to the desired directory on my local hard drive and simultaneously have it added to my Lightroom catalog? Or do I need to save the file then import the file into the catalog? I'm working with CS6.
View 5 Replies View RelatedI have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
I am trying to link my extracted data from blocks with attributes to an extenal source so that the table I create and place into the drawing already has the formulas I need to due the required calculations. But every time I create and place the table the formulas are not in the table. I include the columes that contain the data but it doesn't seem to be working.
View 2 Replies View RelatedWithout using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? For examplle if the value in a textbox was greater than 10 coming from a data record, could the textbox change color, or any other attribute to make it change from record to recortd as it is being viewed or printed?
View 9 Replies View Relatedi have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies View RelatedI've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
I know that the xmls are very important in the design data folder and we shouldn't mess with them.What about the rest of the folders. I have around 11 folders. GOST, AEC Exchange, AIT, Cable & Harness, Bend Tables, DWG-DXF etc...
I need to know if any of these folders can be deleted? We don't use AEC Exchange, Cable Harness, BIm Exchange, Design Accelerator, Tube & Pipe.
What about the Optimisation, DXF-DWG. I am not sure if I am using them unknowingly.Does this could be deleted? Is there a procedure to get rid of them.
how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".
Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable.
I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.
I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.
I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.
Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies View Related