Photoshop :: Resolution For Printing

May 11, 2006

I noticed that my resolution is set to 72.

Is there a way that all pictures can be set to 300 dpi for printing?

View 4 Replies


ADVERTISEMENT

Photoshop :: Tile Printing With High Resolution Printing?

Oct 2, 2006

i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.

i really need to be able to tile print this in high resolution on film. anyone know what i can do??

View 1 Replies View Related

Photoshop :: What Resolution For Printing?

Dec 4, 2005

resolution (pixels/inch) of images in photoshop intended for print with an inkjet printer. Obviously, the higher the resolution the better, but there has to be a cut-off at some point (since infinity is not an option). So, what do you think the cut-off is to where there isn't a noticeable difference?

View 9 Replies View Related

Photoshop :: Canvas, Resolution And Printing

Sep 26, 2008

If I make the resolution of a photoshop document canvas 300 PPI (pixels per inch), will it still print out at the original dimensions I set the canvas to? I am asking because I tried a target canvas size of 594mm width by 841mm height on two separate photoshop documents, one at 300 PPI and the other at 72 PPI and it resulted in a huge size difference between the two documents targeted at the same image size. I want to know if they will print at 594mm x 841mm regardless of resolution.

View 15 Replies View Related

Photoshop :: Printing At Higher Resolution?

Oct 21, 2004

Im printing this on an Epson Stylus CX4600. It supports 1440DPI Printing. Ive tried setting the resolution in photoshop to 1440 on the printer section (edit/preferences/units & rulers). Ive tried printing on photopaper, glossy photopaper, matte paper, and regular paper. Ive set the printer for best quality, normal quality and everything in between. But still everytime I print, it does not look as it does on the screen. It prints out fairly blurry, you cant read any text thats on it, except the top part, and thats even blurry.

View 8 Replies View Related

Photoshop :: Resolution And Printing With Out Interpolation

Jul 27, 2004

If I want to to print an image at a certain size in photoshop but do not want to have the image resampled up or down I can basically do this

1. go to image, resize and uncheck the resample image box and type in the resolution at which I want to print = lets use 300ppi just for kicks.

2. Now that will depending on the resolution of the image this will resize the photo the the max size that can be printed at that print resoultion- period. Then is the image is say 5x8 and I want to crop to 4x6 I can set the crop tool to 4x6 and leave the resolution fields blank, to crop with no resampling. Is this correct so far?

Now want I need to know is how do you do the math to figure out max print size from a given resolution- if I have an image that is 800x640 say- how do I convert that to inches to see the max size that can be printed without resampling- am I just dividing both fields by ppi?

View 3 Replies View Related

Photoshop :: Enlarged Resolution Printing

Dec 6, 2007

i have copied several pictures from the Internet sites which are around 72 dpi . Now i wants to get these pictures printed. So please advice me what should i do to enhance its Resolution as these pictures needed to be enlarged (some of them). B coz if i enlarge these lower respolution pictures,

View 1 Replies View Related

Photoshop :: Changing Resolution Of Images For Printing

Mar 15, 2008

I have just started producing photo books, and I am very pleased with the results. But then I realised that I should have changed the resolution of the images I sent to the printing company from 72 dpi to 300 dpi. I have just sent another book with all the images changed to 300dpi which should be good. But ..... I didn't do anything with the "resampling" tick box - I just left it ticked (mainly cos I didn't understand it). Should I have unchecked the "resampling" tick box?

View 5 Replies View Related

Photoshop :: Printing / Resolution / Document Size

Nov 9, 2008

I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.

Anyway, my sizes now are as follows:

Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch

When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.

View 3 Replies View Related

Photoshop :: Printing / Resolution / Document Size

Nov 10, 2008

I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.

my sizes now are as follows:

Pixel Dimensions: W 700, H 410

Document Size: 5.93cm X 3.47cm

Resolution: 300 pixels/inch

When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.

View 2 Replies View Related

Photoshop :: Printing Wrong Dimensions / Resolution

Mar 9, 2008

I need some help printing in photoshop cs2. I create a 5x7 image at 400 resolution and when i go to print, it does not print as a 5x7 image. When I go to print, i select 5x8 paper so i am not sure what i am doing wrong.

View 11 Replies View Related

Photoshop Elements :: How To Change A Photo To High Resolution For Printing

Mar 11, 2014

How do I change a photo to high resolution for printing it on a metal sign?

View 4 Replies View Related

InDesign :: Low Resolution Printing From CC?

Feb 13, 2014

A print job with complex shaded / patterned backgrounds is no longer printing correctly. It works fine when the job is sent to Acrobat where the backgrounds print correctly to the same printer. Is there a setting I should be changing?

View 4 Replies View Related

GIMP :: Printing Is Low Resolution And Not To Size

Dec 11, 2011

I drew up a logo design a while ago and when I finally printed it, I realized I know nothing about scaling my drawing to an actual real printed size. Is there a way to know the size in inches and/or a way to see it on the page (i.e. a print preview). Also, when I do print, it's majorly fuzzy for some reason.

View 1 Replies View Related

AutoCAD Inventor :: Printing Drawings At High Resolution?

Apr 16, 2013

We have created a complex Inventor drawing (Inventor 2013) of a very large plant item which we need to print at about 2AO to put up on a wall for training use. We want to create a high resolution PDF file of the drawing first and then print the PDF having checked the quality and resolution in Acrobat Reader.

We have tried exporting to PDF but we found that the colour shaded fills, behind the lines, are too compressed and the resolution very poor. We tried increasing the paper size but this did not work.We have tried creating a plot file by printing to file using the driver of a large roll feed plotter and then creating a PDF from the resulting file. This was a little more successful but still a long way short of the resolution or line quality we require. When you zoom in the curved lines are very jagged and the colour fill still not good.

We tried printing to a generic Postscript driver but this was even worse as we didn't have enough control over paper size or resolution.

View 5 Replies View Related

Xara :: Change PNG Export Resolution To Something More Suited For Printing

Apr 1, 2011

I export pngs almost exclusively from Xara. I have always opened them in PSP and changed the resolution to 118.50 (about 301dpi) so they are print ready.

I have to make over 21,000 arrows (sob) and having to open each and every one of them in PSP is not something I am looking forward to. There is a way to change the png export resolution to something more suited for printing.

View 6 Replies View Related

GIMP :: Business Cards - Printing Low Resolution Poor Quality

Oct 28, 2012

I'm designing business cards and made my image to scale but when I try to print it says there are resolution problems. I'm not sure what to do. I set the print size to 3.5 inches wides by 2 inches tall but every time I upload it to the print company it say low resolution poor quality.

View 2 Replies View Related

Photoshop :: Making Low Resolution Image Look Higher Resolution For Print

Mar 17, 2013

I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.

View 4 Replies View Related

Photoshop :: Convert Low Resolution Image To High Resolution

Aug 25, 2007

I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?

View 1 Replies View Related

Photoshop :: Big Low Resolution To Small High Resolution

Oct 23, 2004

i have some big .jpgs with low resolution say 10x10 inch at 72dpi.

is it possible for me to convert it to 2x2 inch at 300dpi?

View 5 Replies View Related

GIMP :: Create High Resolution Version Of Low Resolution Texture Used In A Game

Nov 17, 2012

I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...

Original texture:

[URL]

The image to be colorized:

[URL]

View 2 Replies View Related

Lightroom :: Convert Colour Profile Of Custom Printing Package From Pro Photo To SRGB Before Printing

Oct 30, 2012

How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.

View 1 Replies View Related

Photoshop :: DPI Vs Resolution

May 7, 2009

I am trying to have an image of mine printed professionally. However the print house I have sent my image to has asked that my image be submited at 300 DPI. My image is already 7200 x 4055 pixles with a resolution of 300. My question is what is the major difference between resolution and DPI and how can I go about correcting the dimensions of my image?

View 4 Replies View Related

Photoshop :: Best Resolution?

Jun 8, 2008

I am going to edit the photos from Photoshop CS3 Extended at the highest possible Resolution so the photos look amazing when printed from a normal printer or at a proper photo lab. What is the highest possible resolution I could use on the photos without making them look all pixelated (or what ever it looks like) when printed? I was told by a friend that 300 pixels/inch would yield better but is it possible I could go higher?

View 21 Replies View Related

Photoshop :: Resolution?

Dec 5, 2005

my resolution doenst seem to be changing...I'm opening up image size, unchecking resample to link the size and resolution, upping the resolution and clicking ok. I would assume that the picture is supposed to get smaller, but nothing changes.

View 4 Replies View Related

Photoshop :: Resolution?

Nov 3, 2007

Since resolution is such an important factor to whether a pic is sharp and clear, how is photoshop able to increase the resolution of the pic? From what I heard, the picture is broken down into more pixels when the resolution is increased. If so, how can it distort the pic?

I also have this senario which I'm facing now... Since it's rather confusing, I have broken it down into Steps...

Steps

1) Open picture A in photoshop

2) Transformed picture A smaller so that it is easier to work with (less lag)

3) I created some layers and merged all the layers together

4) Copy the merged layer into another Art piece in Photoshop

5) In the new Art piece, I transformed the merged layer back to the original size

As I transformed the merged layer back to the original size, will it become distorted? Or will the resolution remain around the same?

View 6 Replies View Related

Photoshop :: DPI / Resolution ?

Mar 22, 2006

I created a 4x8 photo, added images and text, saved it. When I print it, the resolution goes below 150dpi. Why is that? What can I do to get it to print exactly how I created it to be?

View 3 Replies View Related

Photoshop :: From 72 -300 Dpi Resolution

Jul 13, 2004

I have several images that are in Powerpoint and jpgs and gifs. I need to get it ready for print and I need to make it to 300dpi? I downloaded a free tryout of Adobe Photoshop, but am not at a loss. I know how to transfer the images into jpg or gifs. The images are approx. 625x425 pixels.

View 3 Replies View Related

Photoshop :: Resolution

Aug 13, 2004

I designed it for 1024 x 768 and when I tested it on 800 x 600, it has poor quality. I tried to increase the resolution in the .psd file but that doesn't seem to help, which surprises me.

View 6 Replies View Related

Photoshop :: Resolution

Jan 22, 2007

I'm preparing some images for stock

they are all now 50mb tiff files about, 5000x 3000 pixels more or less.

In the resolution box, the ones scanned by nikon film scanner are 4000.

the ones shot digitally converted by Camera Raw are 240.

And then I have a few from some Large jpegs that are 72.

Does any of this matter? ie, what it says in the resolution box?

View 9 Replies View Related

Photoshop :: Changing Dpi Changes Resolution

Oct 18, 2012

Does changing the dpi of an image change the resolution of the image without changing the size?I have an image that is 300 dpi that I need to enlarge 400% changing the dpi to 75.I don't think manually changing the dpi to 600 will actually change the clarity of the image when enlarged 400%.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved