I have an image that is with sharp edges, very accurate. But when I move it to another page and resize the edges become a little clearer, only the last row of pixels in each edge. Feather is 0.
..Two pics below: before, and after to move and resize.
I have an image that is with sharp edges, very accurate. But when I move it to another page and resize the edges become a little clearer, only the last row of pixels in each edge. Feather is 0. So...
..Above: before, and after to move and resize.
Happened when I had a second monitor connected to my MacBook Pro. When I disconnected, Photoshop didn't scale to fit the screen of my laptop. Even when I reconnected the second monitor the grey Photoshop background is still extended beyond the beyond the bottom of the monitor. I can't grab with my mouse. How do I resize this so it fits back within the limits of my monitor? And when switching back to MacBook what is there a way to have Photoshop resize to fit within the screen?
View 5 Replies View RelatedI am trying to re size my text layer so that the borders would align with the edges of the text, but every time I adjust the upper part of the layer the text itself would shift downward, cutting off the lower part of the text. Is there a way I can conveniently adjust the layer so that it looks like the text fits the layer.
Example I am trying to achieve is something like this.
The problem I keep getting is this.
i drawed to rectangles and rotated them. wheni know want to export the image as PNG or GIF the border is not smoothed, there is a pixelic effect; see attachments.
i want to export them as png or gif, because the background should be transparent.
I've created a 1px border rounded rectangle, (image attached) however, the corners sems jagged and flat. Is there a way to create more smoothed rounded corners?
View 6 Replies View RelatedIt has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
I tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
I thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)I need to create some vector tire images with different edges, such as the top one in the image below.So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below and created a pattern brush with this shape.I then created an ellipse and used the new brush for the outline.
All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.
I'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View RelatedHaving problems resizing images for a website template. Images must be 1275x650. I'm in Cs5. Is there some trick to cropping the image to fit the size without distorting the image.
View 1 Replies View RelatedHow do you do a batch resize in CS4?
View 2 Replies View RelatedWe have covered how to make the glass ball effect.
What about 3d edges to solid flat surfaces?
For example, a box or a folder:
In my photo retouching work I very often cut out a figure to place on a different background. Usually I have a feathered or aliased edge to blend with the new background which works nicely. Sometimes I duplicate that figure so that I can try some shading,cloning etc without damaging the layer below. If I like the results I usually merge the two layers, problem is the top image seems to grow a bit or darken on the edges and I lose any nice feathering I have dome on the bottom layer.
View 4 Replies View RelatedI've been given a rather large jpg file containing a client's logo. The dimensions are huge - 6299 x 1890. I need to resize the image without losing clarity. What steps must I take to do this? Is Photoshop the best place to handle this task, or is Illustrator a better fit?
View 7 Replies View RelatedI was working in Photoshop CS5 creating a flyer when suddenly I wasn't able to resize any images. I was adding images into the flyer fine for a while, but then when I clicked on an image to resize it there were no handles and I couldn't resize. I've closed the program & restarted, closed the file & re-opened but nothing works.
View 7 Replies View RelatedI have signed up for Adobe CC and now have Photoshop CS 6 for the Mac installed and running.When I come to use the image resize feature, I am still getting the same box as I had in CS5 instead of the new much improved feature.
View 1 Replies View Relatedcan i resize my pictures with photoshop
View 2 Replies View RelatedI've had to resample images up a bit on occasion for use at larger sizes (i.e. placement in Illustartor or INDesign at a larger size) and have done that with good results. However, I have a different situation now.
I have an image that is 300 dpi. I am working on a huge display in InDesign, and I've had to place this image at 392%, which gives me an effective dpi of 76.
The display company I'm working with wants the image placed at 100%, but needs only 100 effective dpi due to the nature of their technology.
So I think what I need to do is both:
- reSIZE the image to 392% AND
- reSAMPLE the image to be 100 dpi.
I believe this will have to be a two-step process using the Image Size palette. My question is, in what order do I take these two steps and what settings do I use in the Image SIze palette to get the best results?
Using Photoshop CS5 12.0.4 on Mac OS 10.6.8.
I'm using OSX 10.8.2 and Photoshop CS6, with an intuos 4, and 10 minutes ago the function CTRL+ALT+left or right on my intuos was visually changing the size of my brush, and now, when I use the same combination, it just drags my photoshop window and move it from left to right...!
I can't remember changing anything in the options of my intuos or Photoshop, and make the settings back to defaults doesn't change my problem.
When I open a properties panel / adjustment layer and I expand the panel by dragging from a corner, when I close the program I have to resize the panel the next time I use CS6
So here you can see exactly what the panels are doing:
When I open the adjustment layer from "B" above the panel opens to my preferred size:
When I open the panel from "A" above, it opens in a minimized size like this. Interestingly, any subsequent adjustment layers, whether opened from "A" or "B" are also minimized. NOT what I want.
All of this is even more annoying because I use the "Auto-collapse" option in the panel settings and whenever I try to grab the edges of a minimized panel to expand it, the panel collapses before I can expand it. So I have to go back, turn off "auto-collapse", expand the panel, turn "Auto-collapse" back on, etc.
So when I unlug my MacBook Pro from my Cinema Display, the bottom of the app chrome (application frame and palettes) on the MacBook's display cannot be adjusted. At all. Impossible to grab them with the mouse and readjust for the new screen.
I've tried restarting Photoshop CC. Restarting my Mac. Nothing. Wouldn't there be an option to resize to the current display? Shouldn't this be automatic?
The only thing that seems to work is turning off the Application Frame, and using PS in this mode.
Im doing a picture project, where I need to have many layers..
But just how exactly do I resize an image in a layer? If I go Image > Resize Image...the whole image collection of all layers gets bigger...and I only want that specific layer image to get bigger...
I had to scan and resize. Original, physical picture is 1 1/4in X 2in. Scanned image requirements: resolution of at least 150 dpi, 600 X 600 pixels, 24 bit color, and keep it under 240 KB.
I have basic Canon scanner and CS2....
Okay so I am able to create these really great looking icons, and I usually create them at 160h x 480w.
Now what I want to do is shrink them down to actual icon size like 16x48. But the thing is they look like crap when I shrink them down.
First and foremost I am a programmer not a designer. But does anyone know any tutorials on how to make small *crisp* icons? I just dont understand how to make small icons that look decent.
I am very framiliar with photoshop (several years worth) Not so much illustrator.... but this small sized image issue is giving me a real headache any suggestions?
I need to take around 100 different photos every day and resize them to 7 different sizes in 7 different folders.
Can I automate this process so I place the 100 originals in one folder, open photoshop, run a proceess that will cut all 7 sizes and place the new sizes in the correct folders, all in one action?
Can this be done?
I'm currently having problems with the batch feature regarding pdf files which I can't figure out. My main task is to automatically resize several (50+) pdf files in a folder, save them for web as jpg and then close the original file without saving it. I've tried to make an action for this, but I only end up getting errors or Photoshop trying to overwrite the same file all the time when saving the images. I did manage to make a successful action which worked as batch if I had all the files open in Photoshop, but that's not really what I'm after since I then have to open all the 50+ files first manually. What I would want is for Photoshop to go through all the pdf files in my source folder - resize them - save for web - close original image wihtout saving. I'm currently using Photoshop CS2 if that's any help. Is there anyone who can help? A step-by-step solution would be greatly appreciated!
View 5 Replies View RelatedI have about 300 images (jpg) in a folder. I need to resize all of them. Each file is about 2.2mb. I tried using Action to help out but the problem is I have to keep pressing 'play' for each image and I'm kinda tired and bored by doing all of them. Is there a better way to use Action to do all my 300 without me having to do it one by one?
View 1 Replies View RelatedI've a load of images for an image gallery I'm making in Flash. So they centre correctly I want to make each image, say, 400px x 400px, and if they're landscape images they'll have white space at the top and bottom, and sides if they're portrait. I know about 'fit to image' in the batch menu but that removes the unused background.
View 7 Replies View Related