to make a specific graphic for her, with a lot of curves. But the curves are way too pixelated!
Is there a way to make it less pixelated?
The curves look like stairs to me... I used both Illustrator and Photoshop, but I only saved the last file,
When I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each. I can no longer see the picture. How can I fix this?
View 4 Replies View RelatedI have two art objects on two layers. I want to match to the pixel the two objects that otherwise could be exactly the same but one layered object was imported slightly smaller.
The scale tool has good scale handling, I just want to measure the tool spots to the pixel to gain an exact scale size factor and match sizes.
It blows my mind that somthing this simple isnt all that simple. I used the eyedropper tool to slect a color from another photo, then used the brush while fully magnified to change the color of each pixel.
It was coming out a weird greyish color, and I noticed that if I clicked more than once, it got darker, but so did the pixels directly around the one i was editing. So, i copied both pictures, loaded them into paint, and went to town.
It worked, but then when i copied it back into photoshop, it had a black background (there was no background in the original pictures) around the sprite I was editing. I tried to use the magic wand tool to get rid of it, but it took parts of the sprite with it, so...
Is there any way that I can edit the color of a single pixel (or hell, even a group of pixels if they share the same exact color would be nice...preferred, even) accurately? If not, what program could I use that would keep the transparent background?
Via VBA macro, some way of getting RGB/CMYK color values of a bitmap pixel by pixel?
View 1 Replies View RelatedI managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?
View 2 Replies View Related We are developing an application using functionality of Gimp´s channel mixer with java.
Our problem is that we don’t Know how channel mix works exactly for transforming pixel by pixel in Java.
For example,
We have an image an do on it the next mix:
Output Channel = Red
Red=200.0
Green=0.0
Blue=0.0
For simulate that, we transform all pixels with Red Component *2 and 255 (maximum) if is greater.
Our problem is:
Output Channel = Red
Red=200.0
Green=60.0
Blue=0.0
How can I simulate that?
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.
When I drag around vector points of paths they are not constrained to the pixel grid, when the option "Snap Vector Tools and Transform to Pixel Grid" is off. This is the behavior I expect.BUT: When I drag whole paths, they snap to the pixel grid, no matter what. I even have snapping completely disabled.
This is particularly annoying when eg. creating a path for a zipper. I first make a path for the inside of the jacket or whatever, then I make one notch for the zipper and copy it over and over again for all the notches. It's very troubling when these elements snap to the pixel grid, because it's very unprecise then.
My first post on the forum, after being a guest for some time now!
Anyhow...Is there anyway I can get a plug-in, that turns my normal images into Pixel art?
Surely there is a plug-in for CS2, where I can change an image, into a pixellised version.
way to create professional, clean, sharp icons. I do know that I should use vector programs like illustrator or CoralDraw, but is there a secret to pixel icon art that is hidden or the best way to approach it (program, size, sketch)?
View 1 Replies View Relatedi was wondring if i could make image like this in photoshop.
View 7 Replies View Relatedhow to convert pixels to cm2? for example, let's say that i have an area of 100 pixels. the square root of the pixels is 10 and the resolution is 10 pixels/cm. thus the area in cm would be 1 cm squared, correct? unfortunately, this does not compute correctly in photoshop. as in the number that i get never corresponds to the actual dimensions measured in the image.
View 2 Replies View RelatedI have identified a major problem using CS6.
When nudging folders (filled with layers) around in Photoshop. Holding the shift key at the same time as pressing an arrow usaully nugdes content 10 pixels. However, pressing the arrow key in quick succession, for example 4 times, it will only nudge content 39 pixels or 41 pixels. Pressing the arrow key, say 10 times, quickly would result in only a 95 pixel movement.
Opening the same (80mb) file in CS5 and performing the same test, nudges a ... perfect 10 everytime..
I am a ux visual designer working on major household clients and my PSDs need to be pixel perfect before passing to development. Anything out of place would be highlighted and ultimately would make me look like a novice.
The files are not big. They are for the web. I use CS6 (v 13.0.4) and a 2.7 Ghz Intel Core i7 Macbook Retina with 16GB RAM and SSD. Currently the fastest Macbook you can buy!
I would like to know if it is possible to move a shape (or what have ya) less than a full pixel left, right, up or down?
I've tried holding the Alt key and other things. Also, I've been unable to pinpoint the right keyword while searching the user manual and the FAQ's.
In Classroom in a book for CS5 this is clearly explained and community fora make mention of pixel mask, but none actually step you through it. I can not find it in the properties panel.
View 4 Replies View RelatedHow can I turn off this most irritating default that was not present in 7?
View 2 Replies View RelatedAccepted File Types:
The Photo Center accepts JPG (.jpg) and TIFF (.tif) files under 6 megabytes (MB) each. You may add up to 200 MB at a time. (Quote)
This is what i can uploading for 8x10 prints from my PS "creations"
i have several photos with many layers and some are less,and i was able to increase or decrease the pixel in each photo,to match the allowable (under 6 MB)
tolerance.is there a way to calculate the ratio from pixel to MG to my Max.allowed?
(basically i want 5.99 MB)
how to create this sort of effect? It looks like whoever made it started out by making a conventional design then filtered everything so that it looks 'smeared' and worn away but keeps it's 'pixel-ness'.
View 8 Replies View RelatedI opened a jpg image in PS CS2, and opened the Image size panel. I found the following: Width 2304 px., height 1728 px., doc size 32" x 24" at 72 px/in, and Pixel Dimensions 11.4M.
Can anyone explain the relationship of the pixel dimensions to the other data, i.e., how the pixel dimensions are calculated.
bought a CD printer and made a template on photoshop. when using the elliptical tool (and yes, i held shift+alt to make it symmetrical/centered) to make the work paths around the inner ring, it asks something about pixel tolerance (the default was at 2.0) and after i hit okay, the circle becomes messed up.. how can i make a perfect circle? if i change the tolerance numbers to higher or lower, the circle becomes even more irregular and jagged.
this is how it looks in photoshop...
this is a smaller version (kind of easier to see the irregularities)
and this is how it looks when i print it
what is the shape of pixel [desktop monitor]
View 4 Replies View Relatedhow to make a pixel border around an image.
so far i've got 'select all'
'modify border''then I blank out.
I know I have to press ctrl something or something like that to fill the selected area with the border color I want but I can seem to find it.
I often have to make borders for certain pictures, and I usually make them at 3px. Sometimes they are nice and thick like 3px should be, but sometimes they come out thin. It doesn't matter whether I am editing on a jpeg or png. Also I edit them in grayscale mode if that helps. I also noticed them problem with the brush, and text tool, as in pixels changing size (going from normal to smaller). I have tried resetting all settings. Should I remove the configuration folder in AppData (I use vista 64 bit)?
I use the pencil tool to make borders.
I'm making a 12cm x 12cm flyer which will mostly consist of text - words not blocks of paragraphs - and wondered what my pixel settings so it all prints out OK.
What should I set the options for the canvas to?
I am trying to make a new skin for a phone software,
sometime the button dont appears at the right place, when I try the program
I was looking at the ini files
FileName=sd.bmp
Left=124
Top=225
Width=36
Height=12
NumGlyphs=3
[Btn_Sd7]
FileName=sd.bmp
Left=124
Top=244
Width=36
Height=12
NumGlyphs=3
[Btn_Sd8]
FileName=sd.bmp
Left=124
Top=263
Width=36
Height=12
NumGlyphs=3
so I think those are the button position, so how do I know in photoshop
those button position?
Is there a way to make a one pixel wide selection around an extracted portion of an image? A body with flighty hair and all colorful clothes. I want to strech the outline of the picture.
View 4 Replies View Relatedhow to do them well?
View 4 Replies View RelatedI've been using for a while and still haven't found a way to vectorize graphics. I can't really think of a "professional" way to ask this, but is there any way to change medium of preference to vector?
I figure if a less prestigious program like Corel can render in vector and if Adobe's little flash program can manage it, there has to be a way to switch from pixel to vector graphics in Photoshop.
I don't mean rasterize or vector mask. I'm already working at 500 dpi to minimize the jitter from my unsteady pen hand, but working in vector would be ideal for me so my linearts cease to look like they were drawn by a crack addict in withdrawal. =/
If anyone knows how I can switch mediums, or if there's a plugin that can make the switch for me, let me know.
im trying to make pixel icons, like a book, and some other icons for a CMS (content management system) that i am making. BUT i haven't got a very good idea how to make those icons.
View 5 Replies View RelatedIn this panel the pixel dimensions show is 4,50M . I would like to know How the "Pixel Dimensions" is calculate ? This 4,50M confuse me because my file size is 1,2M.
View 5 Replies View Related