My history brush tool doesn't seem to work! I am doing it just as I used to use it, so I definently know how to use it. Yes, I am using it on the desired layer. I don't know why, for these past few days, it hasn't been working like it used to!
View 1 RepliesCS3, WinXP SP3, 2.5Gig RAM No other major applications running.I set up the history brush to get from one snapshot (either opening or another shapshot), make sure the layers are active, etc, history brush 101 stuff.Wacom tablet is working fine. Nothing happens.Opacity 100%Flow 100%Whether in "Normal" or "darken" or "multiply" or whatever, NOTHING HAPPENS!The brush icon is rubbing on the screen. I'm almost scraping through the Wacom protector screen. NOTHING!!No error message.no pixels change.
View 4 Replies View RelatedOpened the myFile.psd file to continue edits from yesterday.
All layers are still visible, but when I attempt to use the History Brush Tool to continue editing the layer to paint over the image, nothing happens. It all was working yesterday.
Since I am new to Photoshop I was unsure if there was some default setting that needs to be changed.
This is the trial version of CS4.
I am sure that in the past Texture settings saved when I loaded a saved Art History Brush tool preset. But suddenly, the Texture setting - specifically Depth, is not being remembered. In other words - I have saved an Art History Brush as a Tool Preset. I have then used some other brushes and experimented with texture including the Depth setting. When I go back to the saved tool preset, the Texture Depth setting has changed to whatever it was when I last used it - not its saved value. I thought the point of Tool Presets is that they save all brush characteristics.Â
I'm using CS6. The tool presets and their Texture attributes work fine in CS5. Maybe I need to reinstall CS6.
I am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies View RelatedEverytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
So everything is fine until I use the select tool, and then free transform a part of the image. Then my brush and eraser stop working until I save and restart the program.
View 1 Replies View RelatedI am having problems with the free style tools, brush tool, lasso tool, etc. when I open Photoshop everything works fine but as soon as I press any key, the brush tool makes just one dot instead of a line, I can't slide any adjustment bars, like to make opacity from 0% to 100% or change diameter of the brush, any movement in the mouse is like I just made a single click, I wait around 10 minutes and everything is ok again.
View 2 Replies View Relatedwhile working on photoshop, Brush Tool Have Stopped Working.
View 1 Replies View Relatedphotoshop has decided to immobilize the lock transparent pixels and more importantly the lock image pixels, therefore not allowing me to paint.
Im trying to use the brush tool with the curves layer to brush away bits i don't want to edit in the layer. the brush tool comes up in the history box but nothing is happening on the image.
Im pretty sure i need to unlock the lock image pixels button but have not idea how or why this has happened in the first place.
i am trying to use the brush tool but it is stuck as a cross and it will not go to a circle when you try to resize it, i know i am doing something wrong but can not work it out ,
View 2 Replies View RelatedFor some reason, my brush tool randomly stops working, even the preview thumbnail won't show a brush stroke. Also, my eraser has been acting up, first only adding black, then erasing layer and I can't set it to white. I have PS Elements 10.
View 2 Replies View RelatedMy settings for the Healing Brush Tool are as follows:
Â
Size = 19 pxHardness = 50%Spacing = 15%Mode = NormalSource = SampledI used "ALT-Left Click" to select my "Source".Â
Here's my problem: Once I have selected my Source, I go to the area of the picture I want to modify and Left-Click and start to drag to cover the area I want to modify. Once I reach my end point, I release my mouse button. In doing so, the area I just modified returns to its original look before I modified it.
Â
I have tried everything I can think of and nothing seems to work
I've been using adjustment layers (curves) and creating a dark / light layer, and then using a brush with opacity of say 30-50% to paint onto the mask to show dark / light in selected areas of an image.
Â
Until yesterday this was working fine. Now however, my brush is appearing pixelated, and scattered about like an airbrush or spray paint. Rather than all the brush being smooth. Even at 100% opacity, not all of the pixels are altered, instead there are clearly visible (when zoomed in) pixels which are lightened / darkened, and some which have been totally unaffected, which leads to a horrible pixelated effect.
Working with Windows platform, using Photoshop CS4, Brush Tool is not working with Layer Mask, how can I resolve this challenge?
View 3 Replies View RelatedAm I the only one having trouble with the brush tool using a touchscreen running Windows 8? The touch feature doesn't work at all, and the mouse is intermittent, at best.
View 1 Replies View RelatedI've reset all tools, completely shut down my macbook but nothing is working.
View 2 Replies View RelatedI have cannot paint in black to conceal on a layer mask. I have "NORMAL" mode set and the foreground color is set to black. When I paint or use the gradient tool in "normal" mode with black it paints to transparent.Before the upgrade it was normal.  I have this problem on both CS6 apps pc-and-laptop.
View 4 Replies View RelatedAs pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined". Â Well, this is not the case since I did define it with command Alt + left mouse click.
Â
Background:Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
The brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
Frequently can not use the History Brush. I get an error message saying the history state dose not contain the corresponding layer.
View 1 Replies View RelatedThe tolerance feature of art history brush tool is explained in the reference as following:
Â
"A high tolerance limits paint strokes to areas that differ considerably from the color in the source state or snapshot"

When I try to use this tool on a image's original state (no difference with the history state) with the 100% tolerance setting, some of the areas can be brushed.

So, I'm a little bit confused about the function of the "tolerance" slider.
From what I have read I think that I should be able to use as a source for the Art History brush any snapshot I have taken of an earlier layer. But when I tick the left hand box (ie put the Art History icon there)to make a snapshot active and then put the mouse cursor over the top layer of the image, I get an error message saying "Could not use the art history brush because the history state lacks a corresponding layer". But I can paint into it (the top layer) using the original image (with the art history brush icon next to it). In other words, I cannot use the art history brush with any snapshot as source.
What I am trying to do is have available two or three layers with different retouching treatments of the same image as snapshots so that I can paint them in to a new blank, but color filled, top layer. So, I want to have for example, a layer with little detail, another with lots of detail and another with increased color saturation and be able to add these by art histor brush into the blank top layer (which is filled with a background color).
I thought this should be possible. At the moment all I can use is the original image as an art history source.
I'm using CS4.
Would like to see some results of your work with History Brush, hope my request is not too personal.
View 1 Replies View RelatedIs there a history brush in Camera Raw ?  I am using CS6 In photoshop there is a history brush...but don't see one in Camera Raw. How do I go back?Â
View 10 Replies View RelatedI want to know if there is a shortcut key to "set the source for the history brush" in History Panel . I do retouching task and need to do this action very often.
View 2 Replies View RelatedIt's an 8-bit PSD file. One layer (current, preferred edits) needs some pixels from the original (layer 0). I make sure to get just layer0 showing, make new snapshot, mark that for the Hx brush. Target the top layer/visible and go to where I want to repair the pixels. Paint with the Hx brush. NOTHING!
Â
It was occasionally flakey in CS3 and CS5, but this is CS6 and should be rock-solid because I just upgraded.
Â
Win7, maxed on RAM, huge HD, Quad core running at 3GHz each, graphics card enabled etc.
I've moved from using destructive adjustments to the nondestructive adjustment layers, but I can't seem to get a handle on how to use the history brush?
Â
I've tried taking a snapshop of the current state with adjustments. then click back to the original snapshot as the source, hoping the history brush would work, but it doesn't. is there a way to use the history brush with adjustment layers?
Â
I've see one demo that doesn't exactly use the history brush, the paint black on the adjustment layer to expose whats beneath it.Is this how you need to work with adjustment layers?
I've activated a feature without meaning to and don't know how to undo it. With the Rectangular Marquee Tool, the border shifts from a rectangle to a round-edged shape when I release the mouse after selecting an area. Then, when I cut that area, it lifts only a transparent portion of the selected area instead of the entire layer. How do I turn this off?
Also, I was once shown how to make use of the history brush to restore deleted / erased information along the edge of a shape that were overtaken by the magic wand. I've not been able to do that again on my own.
this is for Adobe PS 8.0.
When I use the art history brush at a very small size, it acts very weird. As soon as I click in the document, a bunch of snake like things appear all over. Like a bunch of little worms spreading all over the page. I've trashed my prefs, I've reset my tool, I've tried different brushes, I've checked scattering, noise, etc. in my brush settings, I've checked my blend modes, pretty everything I can think of doing, and they are still doing it.Â
View 5 Replies View RelatedIs there somewhere a list of Adjustments/Modes that the History Brush DOESN'T work with?Perhaps I should re-phrase that.I can get the History Brush to work with say Blur but I can't get it to work with Blending modes or a various adjustment layers.
View 9 Replies View Related