Photoshop :: Limitations Of Layer Via Copy (Cmd+J)
Jul 3, 2012
Some results of Layer Via Copy (Cmd+J) when pixel layers are targeted seem unusual to me. Depending on initial conditions, the result can be entire layers being duplicated instead of just the selection, masks not being duplicated, and the selection being lost plus Select > Reselect being unavailable. .
The following table shows my expected and actual results for CS6 on OS X 10.6.8. Results which I find strange are in red triple caps.
View 23 Replies
ADVERTISEMENT
Jul 19, 2012
I'm trying to copy a portion of a graphic and put it on another layer while keeping it's exact location as to how I view it am I understanded?
View 3 Replies
View Related
Feb 24, 2012
There are many times you will "place" a picture file inside your Photoshop document, and want to resize it, put it in a different layer, or crop the image inside Photoshop - but you may find a simple error message or grayed out layer via copy/cut prevents you from doing so.
To do this, you will most often do this one of three ways:
1) Select the Marquee tool and outline the area of the image you want to copy or cut
2) Go to Layer > New > Layer via Cut/Copy
3) Click Ctrl+J
Many times, you will find none of these selections work. All options will be greyed out. You may be tempted to create a new layer, and then use one of these options in the new layer. In this case, you will get the error message "Could not make a new layer from the selection because the selected area is empty." All these errors are a result of photoshop not identifying pixels that you are trying to cut/copy.
There is a simple solution to this problem. Go over to the "Layers" box, and click on the layer listing for the layer where your newly placed image resides. Make sure your image is the only item in this layer, if not relocate the image into a new layer by itself. Right-click on the layer where your photo is located in the "layers" box and click on "Rasterize Layer".
Once you do this you will now be able to follow one of the steps above to Layer Via Copy or Layer Via Cut.
View 4 Replies
View Related
Nov 20, 2012
I am trying to copy "fx" from one picture to another but when I try to drag to next photo it doesn't seem to work I have held the alt key and dragged but no luck...
View 3 Replies
View Related
Dec 4, 2012
I have been trying to copy a mask from one layer to a new layer in Elements 11. I can do this in CS3 by using alt and dragging to the new layer. It doesn't work in Elements 11. Is this feature unavailable in elements 11 or is there a different command? there doesn't seem to be much point in spending all that time making a complex layer amsk and then being unable to use it on another layer.
I have to give a tutorial on layer masks using both CS3 and elements at the Camera Club!
View 6 Replies
View Related
Aug 19, 2009
"You may purchase only one license of any Adobe Student Edition product. This license may be used only on your privately owned computer. Student Edition products may not be resold by the end user." Are the exact words on the Student version page.I was told that this means it can only be installed once.
How true is that?What if I get a new computer?My specific dilemma is that I am on an older computer right now but do not have the money to get a much needed new one till the end of the year.Class has started and I need to use PS cs4.Am I off my rocker?
View 3 Replies
View Related
Oct 20, 2006
im currently working on "stitching" together several high resolution images for work, and have come across a problem with the canvas size. Currently, i cant have my canvas over 30k X 30K pixels, and the only way for me to fit the entire project as one file is to drastically lower my image DPI. is there any way i can change photoshop's canvas limitation?
View 1 Replies
View Related
Jun 19, 2007
I have a layer that has the exact shadowing I want on another layer. Actually what I really want is to keep the image (colors etc) on one layer and just apply the 'shapes' and 'shadows' from another layer to it.
I've tried putting the layer with the image I want to keep above the shadowed layer and creating a clipping mask and that didn't do anything. I tried changing the opacity of the image that I want to keep to like 30% and that works, but it fades it out too much. I tried creating a pattern with the shadow layer and applying it as a texture to the image layer and that didn't work well either.
View 1 Replies
View Related
May 1, 2011
I have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
View 2 Replies
View Related
Apr 16, 2013
I have two similar images where the subject has moved between the images. I have them in the same file as two separate layers and am using the subtract layer mode to identify where they differ, (roughly!).
I want to be able to use the subtract layer as a completely new layer so that I can make edits to it. The only way I have found to do this at the moment is to 'copy visible', but this still brings other elements that I don't want from where the layers overlap.
View 3 Replies
View Related
Nov 26, 2012
I would like to create a banner that is 144" wide x 8" high. Photoshop is only letting me go up to 100" on the width.
View 1 Replies
View Related
Oct 29, 2011
My current workflow is to Clone my object, mirror the polygons on the clone and delete the original half of the clone so I have two working halves. Turn symmetry on so the center points stay on the plane. Then I model - edit and extrude and so on, the original, the clone is updated. Well partially.
Here are the problems I am running into:
1) There seems to be no way to add a primitive into a polymesh. Been through the manual and I did not find a way to do this.
2) This leads to the next problem. There does not seem to be a way to properly merge or join objects into the poly mesh without creating a new mesh object. This in effect cuts the relationship to the clone. And anytime I want to add a primitive into the mesh as a starting point or target for creating new geometry, this means doing the clone, mirror, delete process all over. Not exactly efficient. As note here I am talking about connected parts not just putting parts in that could be separate. Such as contours on a car body that merge to a disc where the headlight would be. Just as an example. And I am polygon modeling here.
I am aware of lofting just so you know, but the above was just an example. I'd like to know specifically about working in symmetry.
Any tips on a better workflow to model - create/add new mesh components including primitives and edit them - in symmetry.
View 3 Replies
View Related
Jan 7, 2013
Are there any limitations to which angle/perspective I can use in Illustrator? I am trying to create a picture (a mix of perspective and 3d look a like objects) that has an angle of about 70 degrees. Almost top looking down.
Something similar to this: [URL] .....
How would I go about doing something similar to this in Illustrator?
View 5 Replies
View Related
Jul 18, 2012
I have tried the "export to dwg" command and when on "simple" drawings behaves properly.
on some others though (dwg's with shortcuts/alignments/surfaces/corridors/xrefs in any combination) will not export any file. Are there limitations to it tha I should be aware of?
(I'm using AutoCAD Civil 3D 2013)
MacBook Pro, Intel Core i7 CPU M 620@2.67GHz, 8GB RAM
W7Pro SP1, 64-bit / Civil3D 2013
View 8 Replies
View Related
Nov 7, 2013
I want to do this: URL...to get vertex of feature lines.However, I have to select a Reference:Autodesk.AECC.Interop.Land
Can I use that Reference for Civil 3D 2014? is there limitations for Interop in Civil 3D to feature lines?
I use(agreate) all these References Autodesk. AEC.Interop. BaseAutodesk. AEC.Interop. UiBaseAutodesk. AutoCAD. InteropAutodesk. AutoCAD. Interop. CommonAutodesk.AECC.Interop.<domain>Autodesk.AECC.Interop.Ui<domain>
View 4 Replies
View Related
Sep 10, 2012
I've currently undertaken a project for truck design. They have requested for the final design to be 10% of the final size at 300 dpi and they will be using a large format printer, so no panel printing.
Here's the problem- even at 10% it is too large for the document restrictions.
The 24 ton truck at 10% of the final size is 1,278 meters by 228 meters.
All my Adobe programs won't even let me touch this final size, they limit me completely.
How do I create a final output size of 1,278 meters with the preset limitations and keeping a final output of 300 dpi?
View 6 Replies
View Related
Oct 30, 2013
I've noticed that when a selection is Layer via Copyed in Photoshop CS6, it appears brighter and slightly more saturated in color than the original selection it came from. Currently I manually make lighting and color adjustments to match it back to the original, but is there a way to prevent this altogether? There are no masks or adjustment layers or any other tools being used when this happens -- just a simple Layer via Copy.
I'm not sure if there is a setting that will cut out that time consuming manual step of retouching to match the original selection.
View 3 Replies
View Related
Aug 19, 2003
I am trying to take apart this big graphic I made and it is "in pieces" because I made each part for it using layer sets to stay organized. I was trying to copy the layer set to another new file. When I did, there was nothing there! The layer set was there in the new file, the layers, the layer styles, but the layers were empty!
View 2 Replies
View Related
Feb 21, 2009
Simple gray scale photo of kite in sky. The kite is not completely surrounded by sky, part of it is out of the shot. I want to make the sky flash the gray it is now to white(gif). I used the polygonal lasso tool to select the sky. I dont know how to copy it to a new layer so I can change the exposure and make one frame with the original layer showing, another with the exposed layer showing. After I select with the lasso, all the items under "layer" are grayed out including "new". I tried the new layer icon at the bottom of the palette but no go. The closest I have come is edit>copy but where to put it?
Also, if I lasso the kite, isnt it subjective which is the background and which is the foreground?
View 13 Replies
View Related
Aug 29, 2013
In PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
View 3 Replies
View Related
Oct 20, 2012
in a tutorial in PSCS6, I am told to "make a mask for the layer and then copy the layer into its own mask" I am given the key combo "opt+click", apparently to copy this layer into its own mask. This does nothing and I am lost.
I use iMac i7 and lion 10.7.5
View 5 Replies
View Related
Oct 17, 2011
I have 3 group layer ( test1 - test 2 - test ) ! now can i cut or copy only this group ( test2 ) layer to new file ?
View 8 Replies
View Related
Jul 11, 2011
I am new in Photoshop version CS5 I am trying to copy some different layer and merged to new image. Without successful.
I add attachment for example.
I try to merged two layer
| layer is blue color
|| layer is purple color
I selected the two layer by arrow mouse And I go to menu edit Copy Merged but this feature is not enabled.
After this I should type ctrl + n and past the Copy Merged.
View 3 Replies
View Related
Oct 28, 2008
In Photoshop CS3 I cut have 2 open picture side by side and "drag and drop" layers between picture 1 and picture 2, but in Photoshop CS4 i can't open pictures side by side !
Can I copy an layer in picture 1 and insert it in picture 2 ?
View 4 Replies
View Related
Sep 21, 2005
I am interested in B&W conversion from color. I need to copy a red channel information to a new layer, how is this done in CS?
View 8 Replies
View Related
Jun 12, 2009
I drew a shape using the rectangle tool. I then added some options such as drop shadow, outer glow, etc... What is happening is if I create other shapes they automatically copy those options/styles how do I turn that off?
View 5 Replies
View Related
Mar 30, 2009
Can I copy from more than one layer at a time, without merging the layers together? If there's a way to do this it would save me a ton of time (working on animated sprites for a video game).
View 6 Replies
View Related
Jun 18, 2013
If I drag an effect from the target circle of one object to anther in the layer's panel it replaces the effect along with all appearance. But I want just to add the effect. For example, a layer has a drop shadow and a path, round corners. I want to move the drop shadow from the layer to the path so that the path now has the round corners and the drop shadow. To do this I have to open the shadow effect of the layer wright down its parameters, then create a shadow effect for the path with the same parameters which is a lot of work.
View 3 Replies
View Related
May 8, 2012
Im trying to copy a channel as a separate layer Im not sure how to word this right. I wanna keep the red channel cause like it as a starting point but i also want to keep the RGB to add some of the original color on parts of the red channel
View 1 Replies
View Related
Sep 5, 2012
I do a lot of texture work and create depth by using several layers and different blending modes. I wind up masking and remasking the same thing on multiple layers -- is there a way to copy the mask on one layer and paste it onto another? I know I can drag a mask to a different layer, but that removes the first one.
View 6 Replies
View Related
Aug 8, 2013
why doesn't the color in a background copy layer change even after i've chosen a new color in the color picker and that new color shows as the background color on the tools panel? This question pertains to Photoshop cs6.
View 1 Replies
View Related
