I'm using Ps CS4 and recently the original colors are changed to other colors !
see this picture *click here*
and before I open any image this would appear *click here* how to reset everything.
how I can to reset all the settings back to default settings...
View 3 Replies View Relatedim doing this for class and the book tells me to hold trl Al and shift as soon as i open photoshop. this isnt working and because im doing this for school im on a bit of a time crunch.
View 1 Replies View RelatedOccasionally Photoshop will crash or I have to force close Photoshop. When this happens the settings within Photoshop reset back to the default settings. This is a pain as I must then go back and reset everything again. This has been happening since CS5 and also happens in CS6.
View 7 Replies View RelatedI'm running 64bit CS6 and have 24GB of ram. GTX 660ti. This shouldnt be a problem and has not been. My psd which is almost 500MB usually takes 30-60 seconds to open and once i am in it works fine. It just took me a good 5-10 minutes to open the psd. The efficiency is at 19%* and i dont know what that asterisk means. I allocated 22GB of ram to it, 8 cache levels and such and it's still being really slow. Should I try reinstalling? This is very cumborsome and would like to fix this problem asap.
this also happened randomly. The program wasn't even closed. My brushes reset, too. I even tried rebooting, and nothing.also, photoshop now uses up to like 20gb of my ram automically without any files open in the program. Before it was about 6-9gb.
My 3D camera view is acting kooky when I go into 3D mode. It's like I'm underneath the text looking up at it, and no matter what settings I mess with I can not get the view that I want. Yes I have went to all the little drop down window and clicked on default view and I still get this same underneath view. Is their a way to reset ALL default settings in PS Cs6.
View 5 Replies View RelatedI am using Adobe Photoshop CS6 and I tried the shortcut (Ctrl + Shift + Alt) but that doesn't reset the Safe for Web settings.
View 4 Replies View RelatedMy work screen in, expert, PS E 11, is different then the original screen, i.e. tool bar and boxes on right are missing. How do I recover them?
View 4 Replies View RelatedMy cloning stamp is suddenly doing things differently, but I didn't knowingly make any changes, so I'd like to reset the program to its original settings but I don't know how.
View 2 Replies View RelatedI was working on a layer effect.
and it just stopped working.
i restarted PS, rebooted my PC... tried all other layers and different projects...
the blending options work and can be checked and unchecked.
but the Styles wont work.
they cant be clicked or checked.
We're putting Paint.NET on some public computers. Is there an easy way to reset the program back to the default settings? I'm aware of the "Reset Windows Locations" option. I'm looking for a way to reset everything else back to the "out-of-the-box" settings/configuration when Paint.NET is installed.
View 4 Replies View RelatedWhere can I reset to default settings in Inventor 2010 ? Trying some configurations , but now I need to set my Inventor to original settings, where can I do that ?
View 2 Replies View RelatedMy brushes an sculpting tools arnt doing wht they're supposed to. My sculpting tool is taking from the mesh and my bumpmap is doing the same, even whn i press ctrl my bumpmap dsnt raise as much and ive checked my brush strength. how to reset my settings
View 3 Replies View RelatedHow do I get rid of these white boxes on my lines... [URL] ... I am using cad 2011 for mac. i have probably clicked some setting in the ortho or snap buttons or something, should i just reset to the old settings and if so how?
View 9 Replies View RelatedI recently installed Lightroom 4.3 on my computer and made an error in setting my defaults. Then I made some corrections using Windows Explorer, now when I try to start program I get message "Lightroom encountered an error when reading previous cache and needs to quit". "Lightroom will attempt to fix this problem next time it launches".
The only option available is to quit Lightroom. After attempting to restart Lightroom several times including a reboot I get the same message.
Do I need to uninstall lightroom and then reinstall or is there a way to delete the catalog and start over.? I can't run lightroom to make any changes unless there is a way to bypass the quit option.
For whatever reason, everything reset back to default in my application settings. The only thing I remember happening was that at one point my Inventor was not able to establish a connection to the server where the liscence is stored and it gave out an error message. Ever since then, everything was reverted to default.
how to change the look of the highlights in the assembly environment when selecting parts? I can't remember where it's at.
Inventor 2013
Windows XP
How to reset the work space back to default settings?
View 1 Replies View Relatedi recently updated to 5.3 and everything was great, just like normal.. then after an import of raw files, i selected one to develop and went to look for my "exposure" slider on the right side of the screen. it has disappeared??? i also am missing my simple saturation slider too. now i have an extremely indepth saturation sliders for every color. i have tried to reset tool settings, i have searched around, i even reinstalled lightroom hoping i would get it back to what i am used to...
is there a preference file that i can delete to get me back to 100% default settings?
When using AdMigrator.exe /reset [see here] you can create a ZIP file with a backup of the user settings. Are there any instructions to restore the user settings from the ZIP file?
View 1 Replies View RelatedI am using Paint Shop Pro X6. I am an experienced Paint Shop user. Today, I must have done something strange, because now when I use the clone tool, instead of getting what normally occurs, the cloned area consists only of large dots--similar to what a half-tone photograph looks like under high magnification. The dots are the proper color.
Is there a way to reset Paint Shop Pro to default settings as the software existed when it was installed? That might solve my problem.
We have a big issue where half our users can't open autocad. We have half running 2013 and half running 2006. For our 2013 users we've gone to our start menu and reset settings to default. and then just re-loaded our custom menus. How can I reset Autocad 2006 to default if I can't open Autocad?
We need to get people up and running.
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
Photoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
How do I set my color picker. It does not look like the one I have used for years.
View 4 Replies View RelatedWhen I click on the Forgound or Background color in the left bottom, the color picker that is displayed is not the one that I am use to seeing which was loaded by default when the program was installed. How do I get the origional one back?
View 3 Replies View Relatedwhen I tried to change the foreground color in te color picker window, the palette changed.
Instead of white being in the top left and black in the bottom left, these colurs are now exactly in the top middle and bottom middle.
How do I revert to the old palette?
i dont know what i did wrong, but ever since i use the color scheme editor to make 1 color change
every color scheme is messed up...i have a green background in the winter night scheme
how can i arrange this
i've try importing the backup registry file in the color scheme editor but that didnt work
this tool really suck, it keeps showng error message..
Product Design Suite 2013
The Mtext Editor allows one to change the text highlight color by going through the Text Formatting toolbar, clicking the arrow drop-down menu, and selecting Editor Settings > Text Highlight Color...
This brings up a Select Color dialog box with a single Index Color tab, which lists the default color of 16,62,112 greyed-out in the Color field. In AutoCAD LT 2008, one can select any AutoCAD Color Index (ACI) color from a range of 1-255, including the seven basic color names for colors 1-7. In the full version of AutoCAD 2008 (and possibly other versions of LT?), there are additional tabs for True Color and Color Books, however these tabs are not present in LT. AutoCAD LT limits text highlight colors to ACI colors only, excepting the default color of 16,62,112 as noted above.
My problem stems from changing the text highlight color in a quick experiment: there is no apparent way to restore AutoCAD LT's default text highlight color of 16,62,112, since it is not an ACI color. I can pick a sort-of-close ACI color instead (I'm currently using color 156), but it seems like there should always be a mechanism to restore any variable to its default setting.
how to restore the default Mtext Editor highlight color in AutoCAD LT?
Theres still not a way to reset all face´s color to ´´as feature´´? I can only seem to find old threads with no solution.
I really dont want to control click every surface someone before me manually changed, mb some VBA code ?
i'm in action schematic and if i reset any node (for example images/surface) then some parameter is still not affected. For example : the blend type and surface type and couple more are not affected by that reset function. Is this a bug ?
View 3 Replies View RelatedThen GIMP starts its foreground and background colors aren't black and white anymore.
I would like to know how to reset them back to default values (then program starts).