How can i delete the layer content without delete the layer? the question is there is selected area. i want to delete the selected connect except deleting the selection only content. and i should delete the layer .
View 3 RepliesI have a photo open and click on the "Create new fill or adjustments layer" button at the bottom of the Layers panel.
In CS3 I able to create a layer (say Levels) and apply it, then select the eraser tool and delete sections of that adjustment layer that I did not want revealing an unaltered section of the original photo behind it.
I can not seem to do this in CS4. I can add the layer and select the eraser tool but it will not delete anything.
Why can you no longer delete layers with the delete key?
View 4 Replies View RelatedI've done a new fastener for practice and uploaded it to the content center. now i want to delete it .
inventor 2011
vault 2012
Everyone at the office where I work is having the same problem with AutoCAD 2014:
1. When creating a new layer state, and selecting all layers and clicking "remove from layer state" and then "okay", upon going back into the layer state, about 80% of the layers have returned and you have to select all and delete again and hit okay, and then go back in and do it again, about 7 or 8 times total before the layer state is cleared out and ready for you to add back just the desired layers. Even if you don't create a blank slate layer state to begin with, whatever layers you delete, once you hit okay and go back into the layer state, most of the ones you just deleted are back.
2. Even more of a problem is that sometimes all the already created layer states will suddenly reassimilate ALL layers in the drawing, and the above process has to be done to all existing layer states.
This takes an enormous amount of time to correct for multiple layer states, which we typically have in a drawing.
I have a large picture that a part of which I have on a layer. The image itself is much larger than the layer itself. So when I chose transform, the edge marks/lines are way off the layer screen. I need to drag these layers to a new PS file of the same size and I dont want to bring over the entire huge image layer. Is there a way to have PS inverse select all alyer content not on the layer itself and trim it?
View 2 Replies View RelatedWe are using photoshop CS5 12.0.2 and OS X 10.6.8 and have run in to a serious problem. When we do a save as the file seems to delete the contents of some layers in the newly created image. The layer itself is still present but completely empty.
We haven't closed down the original file as we are worried it will delete the layer contents in the only file which is currently complete. It has already done this to other files which are now useless and we will have to start again. Flattening seems to delete the contents of the layer as well.
I am trying to create an object on a new layer and fill it using the paint bucket tool and am getting the following message:
Could not use the paint bucket because the content of the layer is not directly editable.
I'm trying to learn Gimp so I can use the art I made with it in my games later on but as a formal Photoshop user I feel like that I have a hard learning curve.
I'm trying to move things on my layer without effecting the layer boundaries (just like the way move tool works in Photoshop).
I know that this is possible using selecting the part I want to move on my layer, then holding Ctrl+Alt and dragging with my mouse, then it creates a floating layer what I have to convert to layer in the layers panel.
since Photoshop CS5 (Mac), there is always shown a grey bounding box around the content of the selected layer, when I move it. For CS5 there exists a plugin, that removes this terrible box, but it doesn't work anymore with CS6.
View 12 Replies View RelatedIt seems once you enter a custom name for a text layer in the Layer palettes, it breaks the connection between the text content and the layer name.
Is there any way to get a text layer's name to be the same as the content of the text layer? (In After Effects, if you clear out a custom name of a layer, it will automatically rename a text layer to what the text contains.)
We just bought new Macbook Pro laptops last Friday and also got Adobe Photoshop CC and Adobe Illustrator CC. Everything works pretty fine, except moving layer content eg. images or fonts around is a bit behind, slow/laggy, without any apparent reason.
This happens despite external screen connected or not. It also happens with or without power adapter connected. We have brand new Mac OS Mavericks and 16GB RAM so performance should not be a problem.
Some information (translated from Finnish system info):
Model name: MacBook Pro
Model: MacBookPro11,1
Processor: Intel Core i5
Processor speed: 2,4 GHz
Processor amount: 1
Core amount: 2
L2-memory per core: 256 kt
L3-memory: 3 Mt
RAM: 16 GB
[code]....
how would I go about applying content aware scaling to a video layer inside PS? Basically I'm trying to use this feature to fake an aspect ratio change where by I have a subject surrounded by a relatively uniform background and I would like to be able to create a protection mask as an alpha layer and have photoshop apply the content aware scaling only to the background(to fill in the empty parts of the rescaled video) and leave the subject untouched.
What I've done is opened a video in photoshop as a layer, created an alpha channel to represent the subject(subject is white, background is black on the created alpha channel), changed the canvas size to the new aspect ratio which obviously created a tranparent frame around the original video frame. I then tried to apply content aware scaling to the video, it converted the layer to a smart object then displayed the free transform handles. However, when I selected my alpha channel as the protection area, the content aware scaling seemed to ignore it and went on to distort the entire frame. Now I tried this with still frame from the same video with the same mask/alpha channel and it worked as expected just didn't seem to do it with video.
The idea, if it would be possible to do this in PS, is to rotoscope the subject roughly in AE and generate a matte pass which can then be used as the accompanying alpha layer of the video so then the content aware scaling can be applied to each invidividual frame.
As you can see from this screenshot I am trying to use the brush tool to complete the shadow of my planet however if I select the planet the brush tool I'm using does not cover up the atmospheric glow. I am not sure how to select the glow effect independantly of the planet. If I do not have the planet selected then the shadow is applied to all the layers including the starfield layer even though it is completely locked which is very annoying in of itself. So I guess my question is how do I get the shadow to be applied to the planet and its atmosphere but not the background stars. I am using a 3600px brush with 0 hardness for the shadow. System: CS6 on Mac OS 10.8.4
View 3 Replies View RelatedI'm tryign to follow the tutorial of how to make the metal circle but when i get to the airbrush bit it says:
"could not use airbrush because the content of the layer is not directly editable"
Why is this?
and also, edit -> fill doesnt work because it doesnt come up with the fill option ...
I want to disable the auto renaming feature in text layers so that I can change the content without change the name of the text layer. Also i want to do this to all the text in one step, without do it manual one by one.
for more description, i am working on replace English text with other language but i want to keep English name of all text layers SO i want to disable auto renaming while replacing the content.
I recently started using photoshop 7 again, and while messing around with pens, pencils, shapes, vectors, masks, and filters....I messed something up.
When only one layer is left, I can't delete it! There is a icon or symbol to the upper left of the project, which won't go away.
Is this a path? layer? I accidentally pressed "OK" on some screens that I didnt get to read ::slaps forehead::
This is having a profound affect on other things I'm trying to do! This messes up my invert, and some filters....I need to get rid of this mess.
heres a screenshot of it ....
I am learning to make an envelope and the tut calls for me to make little sewed rectangles around the edges which are to be colored red and blue every other rectangle.
Draw the Rectangle > Ctrl + T > Right click > Skew > and then
Ctrl + Alt + T to Duplicate > press right arrow key to move and repeat until the end of the envelope > and then
Duplicate Layer > change color from blue to red
Here is where I am lost:
I am suppose to select every other rectangle and delete them in order for the rectangles to be blue, red, blue red . How to go about doing this and I have been unable to find a solution in faq's or other posts within the forum(s). I'm not even certain how to ask the question so, that may be part of my quest denied
In Inkscape I would just ungroup them so that I could manipulate/delete them as individual shapes and then (if needed) use the rubber band to recollect them and click a regroup button. I cannot seem to find anything similar to this in PS.
I have a photograph as my background layer, and then a shape layer on top of that. I want to put a font layer on top of the shape, select the font, and then delete the selection on the shape layer, so whenever I hide the font, the photograph shows through the shape, but every time I do it, no matter the tolerance, the font that is in the shape looks pixelated. I've reset all of my settings, but I'm not sure what to do.
View 3 Replies View RelatedI have this in Elements 11..I would like to delete/remove the part of layer/shape 10 there outside of layer/shape9. How do I do that?
View 3 Replies View RelatedIs it possible to create a keyboard shortcut to delete a layer from the layer's palette?
View 4 Replies View Relatedhow to use the marquee tool to delete the bottom 2/3rds of a rounded rectangle.
Here's what I am doing:
Clicking on the rounded rectangle and drawing it to the size I want
selecting the marquee tool and selecting the area of the rounded rectangle I want to delete.
After I selected the area with the marquee tool, I press delete and instead of the area I selected being deleted, the whole layer is deleted instead.
From time to time the layer properties manger Blanks out. See the attached image. The data is there, under the "fog" - I can view one item at a time by clicking on it.
CLASSICLAYER works in most situations, but it isn't a real fix. If I play with the layer manager long enough I get some degree of rehabilitation - as if it is really trying hard to open, but just can't manage it. The fields sometimes are blocked black, or certain areas of the fields become visible momentarily. If I scroll to the far right I can pick up some information.
I'd just like it to work properly.
I am running AutoCad Architecture 2012 on Windows 7 professional with NVIDIAGeForce GT 440 and dual screens, (however I keep all the autocad work on the same screen).
I cant delete layers named : ceco.net1/ceco.net2/ceco.net3...how can i delete them
View 9 Replies View RelatedJust as it sounds, my client wants to be able to set the layers up in a drawing file so that all CC parts come in on a specific layer on the drawing.
I'm looking at the layers and the Object Defaults menus in Style Editor but not finding a way to accomplish this.
I'm trying to delete a unused layer. But when I do that I get the following error (see attachment). I googled a bit and figured out that the LAYDEL command might solve my issue, but as I'm using Autocad 2013, that's not possible, as it doesn't have this command..
The block that causes the error can also be deleted, I tried with the purge command, but must be doing something wrong cause it didn't work. With regard to the purge command, I see it this way (attachment 2), how can you display it in a window kind of view to get a better overview?
I am using AutoCAD 2008 and I have a layer that contains no objects which I cannot delete. If I try I am told there are objects on the layer but I cannot find any at all. I have turned off all other layers to try to find the object I need to delete but there is none. How to manage to get rid of the layer.
View 8 Replies View RelatedI want to delete a layer in a banner. I am a novice with gimp and looked to a tutorial to find out how. It says:
Go to File > Dialogs > Choose Layers or just hit CTRL-L. This opens up the Layers Dialog (or window).
The problem is there is no dialogue option in file. I do not know what to do.
file:///C:/Users/michael/Desktop/gimp.htm
I have a layer that contains no objects at all but which I cannot delete. I have tried LAYDEL, QSELETE and other commands which I found by reading other posts with similar problems. Unfortunately nothing appears to be working at all. I am using AutoCAD 2008.
View 9 Replies View Relatedsometimes i can't delete an unused layer, why? if there's a causal factor, can i ignore and just DELETE it?
View 9 Replies View RelatedI am writing my own Illustrator scripts.
How do I write a script to delete layer with ".ARD" name.