Photoshop :: How To Trace Image (Simple Outline)
Jul 28, 2012
Let's suppose I find a photo or an image (illustration or cartoon or something) that I would like to use in my project. I want to trace it and therefore, have an outline of the image I want.
How do I do this using an action or plugin or something.
I know I can do this manually using the pen tool. But are there other ways?
1. Are there other ways to doing this manually?
2. Are there any actions or plugins to do this?
If I use an action, the outlines might be too detailed for what I need.
3. How do I get a simpler outline? Would it be possible for me to choose that?
View 2 Replies
ADVERTISEMENT
Jun 19, 2012
I'm trying to outline an image. In photoshop, I did find edges (save), then opened the image in illustrator and did image trace. I obtained a perfectly outlined image.I can't obtain the same results using illustrator image trace alone.I've adjusted the advance settings a few times to get the same result but with no luck. Threshhold and corner settings are ok, but I'm getting more paths and noise than I want, with the settings at low/1 respectively.I also tried the gray scale setting since the image is mostly gray, expand, etc, but no dice).
View 6 Replies
View Related
Mar 6, 2012
I design t-shirts and one of our biggest customers sells signature shirts. Below is an example of the problem I'm having. The second image is the original and the first one is what happens after I convert to a bitmap and outline trace.
There are always at least 2-3 names with missing letters or filled in letters. I've adjusted the detail etc while tracing but doesn't seem to work. I'm on the verge of losing a very important customer. We've also had to redo several orders because the "glitch" wasn't caught before production.
View 5 Replies
View Related
Jul 24, 2013
This might sound a bit odd, but the "Simple Trace" settings in CS5 were perfect for tracing my artwork for a graphic novel I'm working on. I upgraded to CS6 earlier this year but due to other issues had to take a break working on the graphic novel.
I came back today and drew the source images as I had before (in Paint Tool SAI using only black pen brush for a clean line) and then exported this to a PNG file which I then imported into Illustrator. I assumed that Default in CS6 was the same as Simple Trace in CS5, but it gives far fewer details than Simple Trace does! Is there anyway I get get the Simple Trace settings back?
View 5 Replies
View Related
Aug 23, 2013
Image trace shifts artwork once the trace is finished. Have to nudge art back into place each time.
View 6 Replies
View Related
Oct 7, 2012
I'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting.
Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
View 7 Replies
View Related
Aug 8, 2012
I just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
View 24 Replies
View Related
Oct 17, 2005
I have a silouette which is a human figure on a white background (the figure is black).
Im wanting to change it so that the background is blue (done that part).
I want the silouette to be grey with a thin white border around it?! So far i have managed to change the silouette to grey, but im not sure how to add a border round it, without doing it by hand, pixel by pixel!
View 2 Replies
View Related
Mar 17, 2003
I just wanna draw a white circle with a black outline(border).
View 3 Replies
View Related
Dec 14, 2012
I have a question about using the outline trace function and resolution of images.
Say for instance, I am trying to create an existing logo for a customer in which I have to pull the image off the internet. I am unable to find an image that is high resolution, so I pick one with a lower resolution, because after all, I am going to trace the logo to cut out on my cutter with a heat transfer application. It is a simple design, a heart for instance. So when I use Corel Trace, no matter how small beforehand I make said heart, when it traces it comes out jagged, like the pixelation you see on a low res image. Is there any way to smooth this out? Or do I just need to look harder for a higher res image?
View 2 Replies
View Related
May 25, 2013
So I am basically a brand new user to ai-cs6 and have been working on a project for a friend. I've drawn up the basic components of the logo she wants, all separate individual pieces. My intention is/was to trace in each piece, and scale, rotate, and clean them up according to how the final piece should look. Where I'm running into trouble is that the sketches are not point perfect, meaning there's some shading in the hand drawn, and the lines are rough in areas. I'm trying to avoid redrawing the pieces because we both are really happy with where they're at.
What I'd like to do with ai-cs6. How to trace very simply a one line vector of the outline of the image. So instead of creating a piece that has stroke straight from the scanned in artwork, I get a single line, with multiple points, that flows the simple shape of the piece. From there it seems it would be pretty simple to just increase the stroke weight and modify the style of line to make it look how we would like. except that since the sketch has some rough line sections ai-cs6 is adding either a lot of detail and making it look pretty rough, or it's missing entire sections and leaving them blank.
View 3 Replies
View Related
Jun 23, 2009
we use Corel Draw but different versions. Some of us use the X4, some X3 and some even 12 or 11. We have huge problem with the time interval past while importing even a single simple outline drawing. We usually wait from 4 - 7 minutes.
My question is what could be the problem? Different versions of Corel Draw?, bed LAN connection?, or something else?
View 13 Replies
View Related
Dec 25, 2007
I only just got photoshop yesterday and I barely know a thing but I have got an image with 3 layers and I want to make it into a simple animation, displaying each layer in turn.
I am a novice user using C2
View 1 Replies
View Related
Sep 23, 2012
Illustrator cs6 - I have used image trace to create a 3 colour image of a photograph. Is there a way to create layers based on the three colours? (One layer for each of the three colours)
View 2 Replies
View Related
Oct 15, 2013
I managed to get my logo to white and looking nicely but when I try to create a border around it it doesn't look sharp. I am selecting the text, growing by 1 or 2 pixels around and filling a second layer with black and exporting as PNG (to maintain tranparency). You can see what the finished product looks like at [URL]..... in the slider on the main page. It does not look sharp at all. how to do this in a cleaner looking manner?
View 7 Replies
View Related
Jan 5, 2013
how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
View 2 Replies
View Related
Dec 14, 2013
I'm just now getting into using illustrator (currently on trial for illustrator cc) and I've taken a couple of my illustrations and attempted to use the image trace. The only way I can seem to get the image trace to actually produce an accurate trace is if I use a very large file size. So I take my scanned image (600 dpi 2000x 1891) and load it into illustrator, and here's where the problem comes in. Illustrator will not show my entire image on the screen. I zoom out as far as I can go and it's still cutting off the bottom and top of the image. When I try to scale the image it won't let me scale it down to even 90%.
So my question, is there anyway I can load my full size image into illustrator, image trace it, and then scale it down so I can see the whole image on my screen? It's very hard to paint and work around the image when it's getting cut off.
The first picture is what the whole picture looks like, but it's such a small file size it's blurry and won't image trace correctly.
The 2nd image is what happens when I load my full image size in, I'm scrolled as high as the page will go and the top is still cut off.
View 3 Replies
View Related
Feb 25, 2012
I have recently buy one software ( embroidery) , with the corel draw x5 essential.
- but I can not find the trace function to convert bitmap to vector , like power trace.
View 7 Replies
View Related
Dec 11, 2012
Level: Newbie'ish OS: Win7 64bit PS: CS6
I have been making a simple image of a 300 by 100 rounded rectangle and then adding various layer styles. Basically I am makeing mobile headers which will be used for mobile websites.
Today I was reviewing a few that I have made and noticed that when I open them in their .png format and then create a selection around one (Ctrl + Click) that the lower right coner is not being selected as rounded but as a point and so when I copy and then paste it into a new document it has three rounded corners and one somewhat visible pointed corner. ?? ??
The file has a BG layer and two shape layers (or sometimes just one shape layer). I select the layers and then merge them together and turn off the BG layer beofore I save them for the web. I have also tried just saving the file as a .png w/out merging the layers but no matter how I go about saving the file(s) most of the time one corner is saved w/that annoying and imperfect sharp corner.
View 3 Replies
View Related
Aug 3, 2007
I totally suck with PS, so I was wondering if I could get some help vectorizing this image. I'd like to change the color and make it look more "Web2.0-ish", nah mean?
View 9 Replies
View Related
Apr 22, 2013
I have been able to do this in the past, but today illustrator cs6 will not let me do an image trace. I go under window, then over to image trace and it shows up, but it is light and it can't be opened. I also tried going under Object, then to Image Trace and the same thing.
View 7 Replies
View Related
Jun 26, 2012
i used to trace QR-Code images because I often need them as scalable vector data. That worked nearly perfect in the old versions. I just had to to a little clean-up to some corners but every anchor-point was perfectliy in place. The new Tracer in CS6 places the anchor-points not at the "Black-Square-corners" of the original image. The attaced image shows the Tracer-Preview and settings. The orange points indicate the not correct traced areas.
View 1 Replies
View Related
Apr 28, 2012
I have many (+800) picture to work on for making their egdes more smooth.This is an example of one picture :
The form seems pixellised and i have to get the same form with better quality.
is there a fast and simple way to improve the picture according my needs ?
ps: i insist on "fast way" because i have 800+ pictures like this one ^^
ps2: i have illustrator and photoshop
View 1 Replies
View Related
Mar 27, 2007
i have this simple image 1 to image 2 problem.Basically i need to go from this:
[IMG][IMG](URL address blocked: See forum rules)[/IMG][/IMG]
To this:
[IMG][IMG](URL address blocked: See forum rules)[/IMG][/IMG]
I have tried using a levels adjustment layer (and quite a few others) and dragging the gray midtone slider to the left and almost but not quite,
View 1 Replies
View Related
Feb 13, 2013
i try and use live trace in simple trace it works but if i use any of the color options to trace my image just goes white cant see a thing ?? Ive tried several different jpegs a photoshop file etc etc tried placing, importing dragging image to illustrator with the same results call adobe they want 50 bucks.
View 2 Replies
View Related
Jun 13, 2013
I had a lot of good presets and actions that I've come to rely on. Now that I have Illustrator CC, I'm not using it :-( because I can't find where to migrate the presets from CS6 to CC.
One in particular that I need are my Image Trace presets... I have looked for them in the Presets folder, and even tried moving the "ImageTracing.jsx" script from CS6 to CC, but I don't understand how this is supposed to work.
Presets are so much easier to handle in Photoshop!
View 3 Replies
View Related
Mar 1, 2013
For my work I use the Image Trace a lot. When I Image Trace something and then expand it, it shifts the art over. Every once in a while I wouldn't mind but it does it every time and I have to go back and nudge it back into place by setting the original layer as a template and then looking at it in Outline mode. Here is an example of the shift...
I never had this issue in any other version of Illustrator and I have been working with it since 8. When I have multiple items to Image Trace on one of my jobs and I Image Trace on each one individually, it does it in random directions. Sometimes down and to the right, sometimes up and to the left and sometimes it doesn't do it at all.
Here are the settings I am using...
I am image tracing 1200ppi bitmaps and I don't need it to be any more exact than it is now becuase I am then offsetting it .05" and using that as a relief for our products. But ignoring the shift would make one of our CNC machines mill through the art. Anything to stop "THE SHIFT" would be great. I am using up precious time in my pre-production schedule to be constantly doing this.
View 2 Replies
View Related
Apr 5, 2013
I am new to Illustrator, but know that I need to select the object I'd like to trace before using Image Trace. The problem is every time I used the selection tool, the entire picture is selected, and then traced.
View 3 Replies
View Related
Oct 1, 2012
We have recently updated our office Adobe Creative Suite, and are now using Illustrator CS6 to clean-up hand drawn sketches. When we run any sort of trace on a simple, black and white line drawing, the trace results in a negative image: the white background turns black, and the outline of the sketch is white. We have tried checking the "ignore white" box and several other settings changes. Initially, for our first few times using the new suite this didn't happen:
View 1 Replies
View Related
Feb 17, 2014
I am trying to use Illustrator to create source files for a CNC cutting machine, it requires a single path or paths to be created and exported a as. DXF file.
The trouble I am having is that when I use image trace to create a path, I am getting multiple paths stacked. I have the image trace set to create fills.
All I do is place image, trace image with settings that give good results, expand trace, remove fill, apply stroke and save.
Is there a way to create one single path in illustrator, I am using the demo version with a view to buy but if this cannot be done then it's a non-starter.
View 13 Replies
View Related
Aug 23, 2012
I place the image in AI then hit the live trace button. The image changes into what appears to be vector, but remains a solid image. i.e. can not select any of the shapes or use magic wand tool?
View 2 Replies
View Related
