Here is what I'm doing...
Â
-Open an image of a blue eyeball
-Duplicate layer
-Change the color of the duplicated layer eye to red
-Create a Hide All layer mask on the top red eye layer then select a brush...
I have tried white and black color, but when I paint on the mask I dont get the blue from the bottom regular layer, nothing happens and I have tried everything I can think of?
I am drawing animations with the brush tool onto a black solid layer which is set to add blending mode.
My goal is to create a mask on the solid layer to hide a certain area of what I drew... but it doesn't change anything.
I noticed when I add another effect to the layer (such as curves) the mask does hide that area of the effect, but thats not exactly what I'm trying to do.
 Â
ps. I have After Effects CS6
Is there a one key click that will turn a layer mask off and on?
Because moving the mouse away and back to retouching all the time is quite a drag.
How do I do this in CS4?
View 9 Replies View RelatedMy subject line pretty much sums up what I want to ask.
The thing is I've learned how to do both of them, but every textbook exercise I've done regarding one I found out that I can pull off with the other too.
Are they simply two different mechanisms for doing the same thing?
Level: Newbie  OS: Win7 64bit  Ia: Cs6
Â
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
Â
And/or is all the artwork from then on inside the mask?
Â
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
Â
So, then I went and found a lesson that contained the use of a Clipping Mask.
Â
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
Â
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
Â
So, I have been trying to abate my problem in lots of different ways.
Â
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
Â
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it because I am not getting behind the Mask?
In AI CS5 Version 15.0.2 for Windows 7 64-bit; Is it possible to hide a hierarchal layer from one that is lower in the layer stack? I would like to make visible one of the bottom layers and hide a layer near the top that is on a separate artboard.
View 3 Replies View Relatedthe key functionality lost is the ability to use the previous layer mask for a new layer
View 1 Replies View RelatedI can do one or another, but both at the same time? It is annoying because a mask selection turns into layer selection when you select a second layer/folder.
View 2 Replies View Related(CS3) I have a raster layer that has some semi-transparent pixels.
I'd like to make the layer itself fully opaque, and move the contents of its alpha channel into a layer mask.
(If possible, merging the alpha channel with what I have already placed into the layer mask.)
Is there a difference between selecting your layer and clicking Add Layer Mask Icon versus having that layer selected, hold down ctrl and select Add Layer Mask Icon?
Also regarding working in Lightroom, if I modify a jpeg, select another image from filmstrip to work on and then go back to the first image for more work, are those actions degrading image even though I never physically save and close.
I am using PSE 11 and need a hint as to how to duplicate the picture layer and then add a layer mask. Still trying to figure this thing out.Â
View 1 Replies View RelatedI've often been annoyed by the fact that that I need to go into the layer panel each time I need to switch between editing a layer and editing it's mask. Surely there must be a way to do this with a shortcut. I found a way to disable the layer mask in the shortcut menu, but this is not something I need to do that often. Switching between layer and layer mask, however, happens all the time - at least in my workflow.
View 4 Replies View RelatedI can't figure out how I can use a text or shape layer as a mask for the layer below. See the example attached and you will know what I mean. (I created the example with simply cutting out the text outline from the white box).
Â
I need the text to be a mask and I need it to be editable as text. Don't know if this is possible, experimented with clipping masks but I cant make it work.
I`m trying to swich a image on a layer whit a layer mask. I whant to keep the layer mask but change the image. When I paste a copyed image it the laye it creates a hole new layer. How can I change a image but keep the layer mask?Â
View 1 Replies View RelatedBasically exactly how layer masks behave, except I would like to be able to have full non-destructive editing control over the masking layer (e.g. have it as a smart object). The problem with layer masks is that (AFAIK) only destructive editing is possible.
What I'm after is effectively the same as what a 'luma matte' does in After Effects. Is this at all possible in PS?
I could have sworn that in previous versions of Photoshop, before version CS4, that if there was a link icon between the layer thumbnail and the layer mask on that same layer, if you move one or the other, they both move. In CS4, how do you move the layer pixels and the layer mask at the same time so that they stay lined up?
View 9 Replies View RelatedI have been trying to copy a mask from one layer to a new layer in Elements 11. I can do this in CS3 by using alt and dragging to the new layer. It doesn't work in Elements 11. Is this feature unavailable in elements 11 or is there a different command? there doesn't seem to be much point in spending all that time making a complex layer amsk and then being unable to use it on another layer.
I have to give a tutorial on layer masks using both CS3 and elements at the Camera Club!
Can I move smart layer mask to the smart filters on the same layer as a mask?
View 1 Replies View RelatedI was working on photoshop CS3 with multiple layers and suddenly something weird happened.. Whenever I try to hide just one layer (by checking the checkbox infront of a layer in layer palette), photoshop hides everything in workarea... although in layerp palette only one layer is selected for hide.
View 1 Replies View RelatedI'm trying to blend a photo with a background color. I select the new layer mask (selected), I select the gradient tool (color into transparent), and then draw a line to fade the image layer into the background later and it does nothing. Why isn't this working?
View 7 Replies View RelatedIs there a way to move a layer mask from one adjustment layer to another adjustment layer (within the same file), without removing the mask from its original layer?Â
(I can move a mask to a different layer by clicking and dragging the thumbnail, but the mask then disappears from its layer of origin). I'm using Ps CS5 on Windows XP.
I open something with paint and then I do crop and copy the area. Then I open up another document and paste it. Now I am trying to blend it in. I think I can use layers. Create a new layer, then add a layer mask. Then, at least that's how I have seen it online, I can use the brush tool to make the background reappear around the letters ( letters in my case). But this does not work. The brush only paints it in the background color.
View 9 Replies View RelatedHow do I convert a layer to layer mask?
View 1 Replies View RelatedI've set up some images with layer masks, but i'm problems pasting items on to the layers that are masked. When ever I paste, photoshop (cs3) creates a new layer. Surely there is a way to paste onto the selected layer, and not to create a new layer?
View 3 Replies View Relatedis it possible to use an existing layer as a layer mask?
im trying to use a dirt map from a file to mask some moss, but when i add a layer mask and try and copy the dirt map into the mask channel,
I have a black and white image I want to use this layer as a transparency/opacity mask to another layer of the same dimensions. Is it possible to import the existing black and white image as the layer mask as opposed to manually painting in the mask?
View 1 Replies View RelatedIs it possible to transfer a layer mask from one layer to another layer in PS7.0.1? I am following tutorials in Restoration & Retouching by Katrin Eismann. On p. 350 one reads: "To transfer the layer mask from the Selective Color adjustment layer to the Hue/Saturation layer, Option/Alt-drag the Selective Color adjustment layer mask into the slot of the Hue/Saturation adjustment layer." Is this something that can be done only in CS and CS2?
View 9 Replies View RelatedIf it is possible to hide a layer but make its effect remain visible. I cant make the layer all white, put the effect on it and then blend it with multiply because the background its transparent so it wont work .
P.D.: the effect im trying to do is an inner glow, I know I can do it manually but i was wondering if its possible to do that.
Long time gimp user, but for basic tasks only. Now I would like to get my hands dirty a little more. I'm trying to setup a workflow that involves CAD, Inkscape and GIMP. Basically I did some architectural drawing in CAD, used Inkscape to clean up and convert DXG into SVG, so that I can use paths into GIMP. I did a script that for every path creates a new transparent layer with a layer mask using the path, so I can add fills and textures quickly. Now to the problem: say I want to add a texture from another image, i paste the image into the appropriate layer, then I want to transform the texture a bit (scale, rotate and perspective). the result is that the layer mask is transformed, too. I tried to disable the mask during transform, but didn't work.
Is there a way to workaround this? maybe some layer mode instead of layer mask?
Is there a way to hide a layer within a block? For example, I have 3 layers within a block (Modules, ItemNo, & StudLoc). The block itself is of the layer 'Modules'. I need to hide the 'Modules' layer and the 'ItemNo' layer to just reveal the 'StudLoc' Layer.
View 2 Replies View Related